Temperature compensated tactile sensing using MOSFET with P(VDF-TrFE)/BaTiO3 capacitor as extended gate

This work presents Poly(vinylidene fluoride – trifluoroethylene))/Barium Titanate (P(VDF-TrFE)-BT) nanocomposite based touch sensors tightly coupled with MOSFET devices in extended gate configuration. The P(VDF-TrFE)-BT nanocomposite exploits the distinct piezo and pyroelectric properties of P(VDF-TrFE) polymer matrix and BT fillers to suppress the temperature response when force and temperature are varied simultaneously. The reasons for this unique feature have been established through structural and electrical characterization of nanocomposite. The proposed touch sensor was tested over a wide range of force/pressure (0-4N)/(0-364 Pa) and temperature (26-70°C) with almost linear response. The sensitivity towards force/pressure and temperature sensor are 670 mV/N/7.36 mV/Pa and 15.34 mV/°C respectively. With this modified touch sensing capability, the proposed sensors will open new direction for tactile sensing in robotic applications

Perovskite Ferroelectric

The spectrums of properties exhibited by ferroelectric materials are dielectric, ferroelectric, piezoelectric and pyroelectric effect. This is the makes these materials to have a wide range of useful application. Infrared detectors are used pyroelectric effect of ferroelectric materials. It is used in nonvolatile memories due to have ferroelectric hysteresis. Its piezoelectric properties make them useful for actuator, radio frequency filter, sensor, and transducer. Ferroelectric capacitors are used, their good dielectric behavior. According to the necessity of the system they are available in different form such as single crystals, ceramics, thin film, and polymer, composite. The diversity of properties ferroelectric materials always attracted the attention of engineers and researchers. Size reduction of this material from micro to nanoscale established an enormous consideration to develop nanotechnology. Its vast use of different filed imposed the in detail research in adding to the development of processing and characterization method. This chapter will put some light on some fundamental principle of ferroelectricity, the list of perovskite materials and their application

Phase structure tuned electrocaloric effect and pyroelectric energy harvesting performance of (Pb0.97La0.02)(Zr,Sn,Ti)O3 antiferroelectric thick films

In present work, (100)-oriented (Pb0.97La0.02)(Zr0.95-xSnxTi0.05)O3 antiferroelectric thick films with x=0.08, 0.20 and 0.38, were successfully fabricated. These compositions are located in orthorhombic phase region, the morphotropic phase boundary (MPB), and tetragonal phase region, respectively. The effects of their phase structure on the electrocaloric effect and the pyroelectric energy harvesting behavior were investigated. A considerable temperature reduction of ∆T=13, 33, and 27 oC, due to the ferroelectric-antiferroelectric phase transition, was obtained at 25 oC in these thick films for x=0.08, 0.20, and 0.38, respectively. Moreover, a huge harvested energy density per cycle of W= 3.6, 6.8, and 4.0 J/cm3 was also realized under the experimental condition in the thick films with x=0.08, 0.20, and 0.38, respectively. These results indicated that both the cooling performance and the pyroelectric energy harvesting in antiferroelectrics could be optimized by the proper phase structure control

Dielectric constant tunability at microwave frequencies and pyroelectric behavior of lead-free submicron-structured (Bi0.5Na0.5)1-xBaxTiO3 ferroelectric ceramics

In this article we show that the dielectric constant of lead-free ferroelectric ceramics based on the solid solution (1-x)(Bi0.5Na0.5)TiO3-xBaTiO3, with compositions at or near the morphotropic phase boundary (MPB), can be tuned by a local applied electric field. Two compositions have been studied, one at the MPB, with x=0.06 (BNBT6), and another one towards the BNT side of the phase diagram, with x=0.04 (BNBT4). The tunability of the dielectric constant is measured at microwave frequencies between 100 MHz and 3 GHz by a non-resonant method and simultaneously applying a DC electric field. As expected, the tunability is higher for the composition at the MPB (BNBT6), reaching a maximum value of 60 % for an electric field of 900 V/cm, compared with the composition below this boundary (BNBT4), which saturates at 40 % for an electric field of 640 V/cm. The high tunability in both cases is attributed to the fine grain and high density of the samples, which have a submicron homogeneous grain structure with grain size of the order of a few hundred nanometers. Such properties make these ceramics attractive for microwave tunable devices. Finally, we have tested these ceramics for their application as infrared pyroelectric detectors and we have found that the pyroelectric figure of merit is comparable to traditional lead containing pyroelectrics.This work was supported by Ministerio de Ciencia e Innovación of Spain (TIN2009-14372-C03-02), Fundación Séneca (15303/PI/10), and CSIC (PIE 201060E069)