4,224 research outputs found
Blind Receiver Design for OFDM Systems Over Doubly Selective Channels
We develop blind data detectors for orthogonal frequency-division multiplexing (OFDM) systems over doubly selective channels by exploiting both frequency-domain and time-domain correlations of the received signal. We thus derive two blind data detectors: a time-domain data detector and a frequency-domain data detector. We also contribute a reduced complexity, suboptimal version of a time-domain data detector that performs robustly when the normalized Doppler rate is less than 3%. Our frequency-domain data detector and suboptimal time-domain data detector both result in integer least-squares (LS) problems. We propose the use of the V-BLAST detector and the sphere decoder. The time-domain data detector is not limited to the Doppler rates less than 3%, but cannot be posed as an integer LS problem. Our solution is to develop an iterative algorithm that starts from the suboptimal time-domain data detector output. We also propose channel estimation and prediction algorithms using a polynomial expansion model, and these estimators work with data detectors (decision-directed mode) to reduce the complexity. The estimators for the channel statistics and the noise variance are derived using the likelihood function for the data. Our blind data detectors are fairly robust against the parameter mismatch
Iterative pre-distortion of the non-linear satellite channel
Digital Video Broadcasting - Satellite - Second Generation (DVB-S2) is the
current European standard for satellite broadcast and broadband communications.
It relies on high order modulations up to 32-amplitude/phase-shift-keying
(APSK) in order to increase the system spectral efficiency. Unfortunately, as
the modulation order increases, the receiver becomes more sensitive to physical
layer impairments, and notably to the distortions induced by the power
amplifier and the channelizing filters aboard the satellite. Pre-distortion of
the non-linear satellite channel has been studied for many years. However, the
performance of existing pre-distortion algorithms generally becomes poor when
high-order modulations are used on a non-linear channel with a long memory. In
this paper, we investigate a new iterative method that pre-distorts blocks of
transmitted symbols so as to minimize the Euclidian distance between the
transmitted and received symbols. We also propose approximations to relax the
pre-distorter complexity while keeping its performance acceptable
Blind MultiChannel Identification and Equalization for Dereverberation and Noise Reduction based on Convolutive Transfer Function
This paper addresses the problems of blind channel identification and
multichannel equalization for speech dereverberation and noise reduction. The
time-domain cross-relation method is not suitable for blind room impulse
response identification, due to the near-common zeros of the long impulse
responses. We extend the cross-relation method to the short-time Fourier
transform (STFT) domain, in which the time-domain impulse responses are
approximately represented by the convolutive transfer functions (CTFs) with
much less coefficients. The CTFs suffer from the common zeros caused by the
oversampled STFT. We propose to identify CTFs based on the STFT with the
oversampled signals and the critical sampled CTFs, which is a good compromise
between the frequency aliasing of the signals and the common zeros problem of
CTFs. In addition, a normalization of the CTFs is proposed to remove the gain
ambiguity across sub-bands. In the STFT domain, the identified CTFs is used for
multichannel equalization, in which the sparsity of speech signals is
exploited. We propose to perform inverse filtering by minimizing the
-norm of the source signal with the relaxed -norm fitting error
between the micophone signals and the convolution of the estimated source
signal and the CTFs used as a constraint. This method is advantageous in that
the noise can be reduced by relaxing the -norm to a tolerance
corresponding to the noise power, and the tolerance can be automatically set.
The experiments confirm the efficiency of the proposed method even under
conditions with high reverberation levels and intense noise.Comment: 13 pages, 5 figures, 5 table
Blind equalization
An equalizer is an adaptive filter that compensates for the non-ideal characteristics of a communication channel by processing the received signal. The adaptive algorithm searches for the inverse impulse response of the channel, and it requires knowledge of a training sequence, in order to generate an error signal necessary for the adaptive process. There are practical situations where it would be highly desirable to achieve complete adaptation without the use of a training sequence, hence the the term blind . Examples of these situations are multipoint data networks, high-capacity line-of-sight digital radio, and reflection seismology. A blind adaptive algorithm has been developed, based on simplified equalization criteria. These criteria are that the second- and fourth-order moments of the input and output sequences are equalized. The algorithm is entirely driven by statistics, only requiring knowledge of the variance of the input signal. Because of the insensitivity of higher-order statistics to Gaussian processes, the algorithm performs well when additive white Gaussian noise is present in the channel. Simulations are presented in which the new blind equalizer developed is compared to other equalization algorithms
Joint data detection and channel estimation for OFDM systems
We develop new blind and semi-blind data detectors and channel estimators for orthogonal frequency-division multiplexing (OFDM) systems. Our data detectors require minimizing a complex, integer quadratic form in the data vector. The semi-blind detector uses both channel correlation and noise variance. The quadratic for the blind detector suffers from rank deficiency; for this, we give a low-complexity solution. Avoiding a computationally prohibitive exhaustive search, we solve our data detectors using sphere decoding (SD) and V-BLAST and provide simple adaptations of the SD algorithm. We consider how the blind detector performs under mismatch, generalize the basic data detectors to nonunitary constellations, and extend them to systems with pilots and virtual carriers. Simulations show that our data detectors perform well
- …