Channel equalization and interference analysis for uplink Narrowband Internet of Things (NB-IoT)

We derive the uplink system model for In-band and Guard-band narrowband Internet of Things (NB-IoT). The results reveal that the actual channel frequency response (CFR) is not a simple Fourier transform of the channel impulse response, due to sampling rate mismatch between the NB-IoT user and Long Term Evolution (LTE) base station. Consequently, a new channel equalization algorithm is proposed based on the derived effective CFR. In addition, the interference is derived analytically to facilitate the co-existence of NB-IoT and LTE signals. This work provides an example and guidance to support network slicing and service multiplexing in the physical layer

Circular Convolution Filter Bank Multicarrier (FBMC) System with Index Modulation

Orthogonal frequency division multiplexing with index modulation (OFDM-IM), which uses the subcarrier indices as a source of information, has attracted considerable interest recently. Motivated by the index modulation (IM) concept, we build a circular convolution filter bank multicarrier with index modulation (C-FBMC-IM) system in this paper. The advantages of the C-FBMC-IM system are investigated by comparing the interference power with the conventional C-FBMC system. As some subcarriers carry nothing but zeros, the minimum mean square error (MMSE) equalization bias power will be smaller comparing to the conventional C-FBMC system. As a result, our C-FBMC-IM system outperforms the conventional C-FBMC system. The simulation results demonstrate that both BER and spectral efficiency improvement can be achieved when we apply IM into the C-FBMC system

Multi-service Signal Multiplexing and Isolation for Physical-Layer Network Slicing (PNS)

Network slicing has been identified as one of the most important features for 5G and beyond to enable operators to utilize networks on an as-a-service basis and meet the wide range of use cases. In physical layer, the frequency and time resources are split into slices to cater for the services with individual optimal designs, resulting in services/slices having different baseband numerologies (e.g., subcarrier spacing) and / or radio frequency (RF) front-end configurations. In such a system, the multi-service signal multiplexing and isolation among the service/slices are critical for the Physical-Layer Network Slicing (PNS) since orthogonality is destroyed and significant inter-service/ slice-band-interference (ISBI) may be generated. In this paper, we first categorize four PNS cases according to the baseband and RF configurations among the slices. The system model is established by considering a low out of band emission (OoBE) waveform operating in the service/slice frequency band to mitigate the ISBI. The desired signal and interference for the two slices are derived. Consequently, one-tap channel equalization algorithms are proposed based on the derived model. The developed system models establish a framework for further interference analysis, ISBI cancelation algorithms, system design and parameter selection (e.g., guard band), to enable spectrum efficient network slicing

Narrowband Internet of Things (NB-IoT) and LTE Systems Co-existence Analysis

In this paper, we establish a comprehensive uplink system model for in-band and guard-band Narrowband Internet of Things (NB-IoT) with arbitrary sample duration in the NB-IoT device. The mathematical expressions of received LTE and NB-IoT signals are derived. Moreover, the close-form interference power on the LTE signal from the adjacent NB-IoT signal is given analytically. The result shows that the sample duration of NB-IoT device has significant impact on its desired signal and on the interference to the LTE user equipment (UE). Numerical results show that the analytical expressions match the simulated ones perfectly, which verifies the effectiveness of proposed system model and derivations. The work in this paper provides a valid guidance for NB-IoT system deployment and co-existence analysis

Filtered OFDM systems, algorithms and performance analysis for 5G and beyond

Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating inter-subband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance los

Mixed-numerology signals transmission and interference cancellation for radio access network slicing

A clear understanding of mixed-numerology signals multiplexing and isolation in the physical layer is of importance to enable spectrum efficient radio access network (RAN) slicing, where the available access resource is divided into slices to cater to services/users with optimal individual design. In this paper, a RAN slicing framework is proposed and systematically analyzed from a physical layer perspective. According to the baseband and radio frequency (RF) configurations imparities among slices, we categorize four scenarios and elaborate on the numerology relationships of slices configurations. By considering the most generic scenario, system models are established for both uplink and downlink transmissions. Besides, a low out of band emission (OoBE) waveform is implemented in the system for the sake of signal isolation and inter-service/slice-band-interference (ISBI) mitigation. We propose two theorems as the basis of algorithms design in the established system, which generalize the original circular convolution property of discrete Fourier transform (DFT). Moreover, ISBI cancellation algorithms are proposed based on a collaboration detection scheme, where joint slices signal models are implemented. The framework proposed in the paper establishes a foundation to underpin extremely diverse user cases in 5G that implement on a common infrastructure

Channel Equalization and Interference Analysis for Uplink Narrowband Internet of Things (NB-IoT)

We derive the uplink system model for In-band and Guard-band narrowband Internet of Things (NB-IoT). The results reveal that the actual channel frequency response (CFR) is not a simple Fourier transform of the channel impulse response, due to sampling rate mismatch between the NB-IoT user and Long Term Evolution (LTE) base station. Consequently, a new channel equalization algorithm is proposed based on the derived effective CFR. In addition, the interference is derived analytically to facilitate the co-existence of NB-IoT and LTE signals. This work provides an example and guidance to support network slicing and service multiplexing in the physical layer

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic