2 research outputs found
Recommended from our members
Energy efficiency in cellular wireless networks
Energy efficiency of Long Term Evolution (LTE) cellular communication networks has become a major concern for network operators, not only to reduce the operational costs, but also to reduce their environmental effects. Within LTE cellular networks, base stations are responsible for most of the energy consumption, consuming 70-95% or more of the network power depending on the network topology, configuration, radio technology and data rates that are used.
Power control is an important function in cellular wireless networks and refers to setting the output power levels of transmitters, termed eNodeB in the downlink and user equipment (UEs) in the uplink. LTE utilizes two different mechanisms for uplink power control: Open Loop Power Control (OLPC) and Closed Loop Power Control (CLPC). Uplink OLPC is performed by the UE following eNodeB configuration and can compensate for long term channel variation such as path loss and shadowing. The uplink CLPC mechanism attempts to improve power control performance by compensating fast channel variations due to multipath fading. In CLPC the eNodeB sends Transmit Power Control (TPC) commands to the UE to adjust the UE’s transmit power.
This thesis focuses on an Open Loop Power Control (OLPC) scheme for LTE uplink by using the Okumura-Hata propagation path loss model to set the User Equipment (UE) uplink transmit power control parameters in order to reduce the UE energy consumption. In general, the UE requires more power to connect to distant base stations than closer base stations and therefore this thesis analyses the required power levels using the Okumura-Hata propagation path loss model. Estimation of path loss is very important in initial deployment of wireless network and cell planning. This thesis analyses the Okumura-Hata propagation path loss in different receiver antenna heights (
Capacity and energy efficiency of picocell deployment in LTE-A networks
International audienceIn this paper, we show the impact of deploying picocells on the capacity and energy efficiency of LTE-A networks. We analyze the Erlang-like capacity of a network composed of macro networks only and study the impact of introducing a number of picocells per site. Knowing that the capacity is not the only factor that will drive the evolution of the network, we also consider the energy efficiency as a Key Performance Indicator (KPI). Our results show that, in some scenarios, introducing picocells is a good network densification method as they achieve a higher network capacity with good energy efficienc