ReDO: Cross-Layer Multi-Objective Design-Exploration Framework for Efficient Soft Error Resilient Systems

Designing soft errors resilient systems is a complex engineering task, which nowadays follows a cross-layer approach. It requires a careful planning for different fault-tolerance mechanisms at different system's layers: starting from the technology up to the software domain. While these design decisions have a positive effect on the reliability of the system, they usually have a detrimental effect on its size, power consumption, performance and cost. Design space exploration for cross-layer reliability is therefore a multi-objective search problem in which reliability must be traded-off with other design dimensions. This paper proposes a cross-layer multi-objective design space exploration algorithm developed to help designers when building soft error resilient electronic systems. The algorithm exploits a system-level Bayesian reliability estimation model to analyze the effect of different cross-layer combinations of protection mechanisms on the reliability of the full system. A new heuristic based on the extremal optimization theory is used to efficiently explore the design space. An extended set of simulations shows the capability of this framework when applied both to benchmark applications and realistic systems, providing optimized systems that outperform those obtained by applying state-of-the-art cross-layer reliability techniques

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

Reducing risk in pre-production investigations through undergraduate engineering projects.

This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level. The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor. The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits. The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process

From MANET to people-centric networking: Milestones and open research challenges

In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

Surface engineering by titanium particulate injection mounding

In a recent study a structural hold down component was designed and produced using the particulate injection moulding (PIM) process. The material of choice was titanium due not only to the material properties but also due to the desire to create custom made components for a state-of-the-art marine vessel. On removal from the mould the green parts were seen to have an irregular surface on the top face. The irregular surface presented no through part defects and although the surface irregularities were caused by separation of the two-phases the effect was restricted to the outer surface of the parts. In a more historic study by the author the surface properties of titanium dental implants were modified by the use of adaptive mould inserts during the moulding phase of PIM. These two contrasting studies are considered and have become the basis of a current investigation looking to engineer surface irregularities in an ordered fashion. The application of meso-machining, and additive manufacture are considered and the functionality which may arise are presented

Development of innovative cross-disciplinary engineering showcase

The development of engineering education relies substantially on interactive showcases and practical knowledge. The cross-disciplinary engineering showcase is designed to be fully interactive by having user input, producing a tangible output, and to understand distinct elements from each of the engineering disciplines such as, civil, mechanical and electrical (CME). The showcase operates from the input of mechanical rotational energy by the user pedalling the exercycle. Mechanical energy is then transferred to the pump via a gear train, which converts the user input of 30 rpm to the optimal pump operating speed of 2900 rpm. Further, it is used to pump water from the lower eservoir to the upper reservoir via one of the three flow paths, which the user can select by opening or closing flow valves. Once the water reaches a given height, it then flows back to the lower reservoir via a micro-hydro generator. As a result, it generates electrical energy stored in a power bank that can be used by the user to charge a digital device. Also, the showcase has a QR code to digital media, which will provide an additional explanation/exposition of the presented engineering principles to the user/students. The aim of this project is to develop a cross- disciplinary engineering showcase to enhance student learnings by interpreting the CME engineering principles in schools, institutes, and universities

Development of innovative cross-disciplinary engineering showcase

The development of engineering education relies substantially on interactive showcases and practical knowledge. The cross-disciplinary engineering showcase is designed to be fully interactive by having user input, producing a tangible output, and to understand distinct elements from each of the engineering disciplines such as, civil, mechanical and electrical (CME). The showcase operates from the input of mechanical rotational energy by the user pedalling the exercycle. Mechanical energy is then transferred to the pump via a gear train, which converts the user input of 30 rpm to the optimal pump operating speed of 2900 rpm. Further, it is used to pump water from the lower eservoir to the upper reservoir via one of the three flow paths, which the user can select by opening or closing flow valves. Once the water reaches a given height, it then flows back to the lower reservoir via a micro-hydro generator. As a result, it generates electrical energy stored in a power bank that can be used by the user to charge a digital device. Also, the showcase has a QR code to digital media, which will provide an additional explanation/exposition of the presented engineering principles to the user/students. The aim of this project is to develop a cross- disciplinary engineering showcase to enhance student learnings by interpreting the CME engineering principles in schools, institutes, and universities

Cell Architecture for Nanoelectronic Design

Nanoarchitectures, fault-tolerance, defect-tolerance, noise-tolerance, averaging cellSeveral nanoelectronic devices have been already proved. However, no architecture which makes use of them provides a feasible opportunity to build medium/large systems. Nanoarchitecture proposals only solve a small part of the problems needed to achieve a real design. In this paper, we propose and analyze a cell architecture that overcomes most of those at the gate level. Using the cell structure we build 2 and 3-input NAND gates showing their error probabilities. Finally, we outline a method to further improve the structure’s tolerance by taking advantage of interferences among nanodevices. Using this improvement we show that it is possible to reduce the output standard deviation by a factor larger than \u81ãN and restitute the signal levels using nanodevices