A study of QoS support for real time multimedia communication over IEEE802.11 WLAN : a thesis presented in partial fulfillment of the requirements for the degree of Master of Engineering in Computer Systems Engineering, Massey University, Albany, New Zealand

Quality of Service (QoS) is becoming a key problem for Real Time (RT) traffic transmitted over Wireless Local Area Network (WLAN). In this project the recent proposals for enhanced QoS performance for RT multimedia is evaluated and analyzed. Two simulation models for EDCF and HCF protocols are explored using OPNET and NS-2 simulation packages respectively. From the results of the simulation, we have studied the limitations of the 802.1 le standard for RT multimedia communication and analysed the reasons of the limitations happened and proposed the solutions for improvement. Since RT multimedia communication encompasses time-sensitive traffic, the measure of quality of service generally is minimal delay (latency) and delay variation (jitter). 802.11 WLAN standard focuses on the PHY layer and the MAC layer. The transmitted data rate on PHY layer are increased on standards 802.1 lb, a, g, j, n by different code mapping technologies while 802.1 le is developed specially for the QoS performance of RT-traffics at the MAC layer. Enhancing the MAC layer protocols are the significant topic for guaranteeing the QoS performance of RT-traffics. The original MAC protocols of 802.11 are DCF (Distributed Coordination Function) and PCF (Point Coordinator Function). They cannot achieve the required QoS performance for the RT-traffic transmission. IEEE802.lle draft has developed EDCF and HCF instead. Simulation results of EDCF and HCF models that we explored by OPNET and NS-2, show that minimal latency and jitter can be achieved. However, the limitations of EDCF and HCF are identified from the simulation results. EDCF is not stable under the high network loading. The channel utilization is low by both protocols. Furthermore, the fairness index is very poor by the HCF. It means the low priority traffic should starve in the WLAN network. All these limitations are due to the priority mechanism of the protocols. We propose a future work to develop dynamic self-adaptive 802.11c protocol as practical research directions. Because of the uncertainly in the EDCF in the heavy loading, we can add some parameters to the traffic loading and channel condition efficiently. We provide indications for adding some parameters to increase the EDCF performance and channel utilization. Because all the limitations are due to the priority mechanism, the other direction is doing away with the priority rule for reasonable bandwidth allocation. We have established that the channel utilization can be increased and collision time can be reduced for RT-traffics over the EDCF protocol. These parameters can include loading rate, collision rate and total throughput saturation. Further simulation should look for optimum values for the parameters. Because of the huge polling-induced overheads, HCF has the unsatisfied tradeoff. This leads to poor fairness and poor throughput. By developing enhanced HCF it may be possible to enhance the RI polling interval and TXOP allocation mechanism to get better fairness index and channel utilization. From the simulation, we noticed that the traffics deployment could affect the total QoS performance, an indication to explore whether the classification of traffics deployments to different categories is a good idea. With different load-based traffic categories, QoS may be enhanced by appropriate bandwidth allocation Strategy

JTP: An Energy-conscious Transport Protocol for Wireless Ad Hoc Networks

Within a recently developed low-power ad hoc network system, we present a transport protocol (JTP) whose goal is to reduce power consumption without trading off delivery requirements of applications. JTP has the following features: it is lightweight whereby end-nodes control in-network actions by encoding delivery requirements in packet headers; JTP enables applications to specify a range of reliability requirements, thus allocating the right energy budget to packets; JTP minimizes feedback control traffic from the destination by varying its frequency based on delivery requirements and stability of the network; JTP minimizes energy consumption by implementing in-network caching and increasing the chances that data retransmission requests from destinations "hit" these caches, thus avoiding costly source retransmissions; and JTP fairly allocates bandwidth among flows by backing off the sending rate of a source to account for in-network retransmissions on its behalf. Analysis and extensive simulations demonstrate the energy gains of JTP over one-size-fits-all transport protocols.Defense Advanced Research Projects Agency (AFRL FA8750-06-C-0199

TDMAとDCFの組み合わせによるアドホックネットワーク上でのQoS通信の実現方式

　An ad hoc network does not rely on the fixed network infrastructure; it uses a distributed network management method. With the popularity of the smart devices, ad hoc network has received more and more attention, supporting QoS in ad hoc network has become inevitable. Many researches have been done for provision of QoS in ad hoc networks. These researches can be divided into three types.　The first type is contention-based approach which is the most widely used. IEEE 802.11e MAC (media access control) protocol belongs to this type which is an extension of IEEE 802.11 DCF(Distributed Coordination Function). It specifies a procedure to guarantee QoS by providing more transmission opportunities for high priority data. However, since IEEE 802.11eis designed based on the premise that access points are used, when the number of QoS flows increases, packet collisions could occur in multi-hop ad hoc network.　The second type is using TDMA-based approach. The TDMA approach can provide contention-free access for QoS traffics through the appropriate time slot reservation. The current TDMA approaches reserve time slots for both QoS traffics and best-effort traffics. However, it is difficult for TDMA as the only approach to allocating channel access time for best-effort traffics sincet he required bandwidth of the best-effort traffics changes frequently.　We propose a QoS scheme, which takes advantage of both contention-based approach and TDMA-based approach. In the proposed scheme, contention-based approach DCF provides easy and fair channel time for best-effort traffics, and TDMA approach serves the QoS traffics. A time frame structure is designed to manage the bandwidth allocation. A time frame is divided into two periods, specifically the TDMA periods and the DCF periods. The proportion of two periods is decided by QoS traffics. Therefore the QoS traffics are given absolutely higher priority than best-effort traffics. In order to guarantee the transmission of each QoS packet in TDMA period, a time slot assignment algorithm based on QoS data rate has been proposed. The proposed scheme also employs an admission control scheme, which rejects the new QoS user when the channel capacity is reached. In addition, we provide the configuration of the proposed scheme in the mobile environment. The procedures are designed for route changes and new-adding users. 　The proposed scheme is simulated in the QualNet simulator. In the static environment, the performance of the proposed scheme is evaluated in the case of a gradual increase in the number TCP flows and in the case of gradual increase in QoS data rate. Simulation results show that in the static environment the proposed scheme can not only provide effective QoS performance, but also can provide good support for best-effort flows. In the mobile environment, we simulated the performance of the proposed scheme at different moving speed (maximum is 5 Km/h) when the ARF (Auto Rate Fallback) is available. From the simulation results, in a specific mobile environment, the proposed scheme can support the QoS transmission well.電気通信大学201

Design of rate-adaptive MAC and medium aware routing protocols for multi-rate, multi-hop wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The IEEE 802.11 standard conformant wireless communication stations have multi-rate transmission capability. To achieve greater communication efficiency, multi-rate capable stations use rateadaptation to select appropriate transmission rate according to variations in the channel quality. The thesis presents two rate-adaptation schemes, each belonging to one of the two classes of rateadaptation schemes i.e.(1) the frame-transmission statistics based schemes, and (2) Signal-to-Noise Ratio (SNR) based, closed loop schemes. The SNR-based rate-adaptation scheme, proposed in this thesis uses a novel mechanism of delivering a receiver’s feedback to a transmitter; without requiring any modification in the standard frames as suggested by existing research. The frame-transmissionstatistics based rate adaptation solution uses an on-demand incremental strategy for selecting a rate-selection threshold. This solution is based on a cross-layer communication framework, where the rate-adaptation module uses information to/from the Application layer along with relevant information from the Medium Access Control (MAC) sub-layer. The proposed solutions are highly responsive when compared with existing rate-adaptation schemes; responsiveness is one of the key factors in the design of such protocols. The novel feedback mechanism makes it possible to achieve frame-loss differentiation with just three frames, avoiding the use of Request To Send/ Clear To Send (RTS/CTS) frames and further delays in this process. Performance tests have affirmed that the proposed rate-adaptation schemes are energy efficient; with efficiency up to 19% in specific test scenarios. In terms of throughput and frame loss-differentiation mechanisms, the proposed schemes have shown significantly better performance.Routing protocols for Mobile Ad-Hoc Networks (MANETs) use broadcast frames during the route discovery process. The 802.11 mandates the use of different transmission rates for broadcast and unicast (data-) frames. In many cases it causes creation of communication gray zones, where stations which are marked as ‘reachable neighbours’ using the broadcast frames (using lower transmission rate) are not accessible during normal, unicast communication (mainly at a higher rate). Similarly, higher device density, interference and mobility cause variable medium access delays. The IEEE 802.11e introduces four different MAC level queues for four access categories, maintaining service priority within the queues; which implies that frames from a higher priority queue are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result these factors are not considered which result in severe performance deterioration. To meet such challenges, the thesis presents a medium aware distance vector (MADV) routing protocol for MANETs. MADV uses MAC and physical layer (PHY) specific information in the route metric and maintains a separate route per-AC-per-destination in its routing tables. The MADV-metric can be incorporated into various routing rotocols and its applicability is determined by the possibility of provision of MAC dependent arameters that are used to determine the hop-by-hop MADV-metric values. Simulation tests and omparison with existing MANET protocols demonstrate the effectiveness of incorporating the medium dependent parameters and show that MADV is significantly better in terms of end-to-end delay and throughput