Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Proceedings of the Fall 1995 Advanced Digital Communication Systems

Coordinated Science Laboratory was formerly known as Control Systems Laborator

Cyclic Prefix-Free MC-CDMA Arrayed MIMO Communication Systems

The objective of this thesis is to investigate MC-CDMA MIMO systems where the antenna array geometry is taken into consideration. In most MC-CDMA systems, cyclic pre xes, which reduce the spectral e¢ ciency, are used. In order to improve the spectral efficiency, this research study is focused on cyclic pre x- free MC-CDMA MIMO architectures. Initially, space-time wireless channel models are developed by considering the spatio-temporal mechanisms of the radio channel, such as multipath propaga- tion. The spatio-temporal channel models are based on the concept of the array manifold vector, which enables the parametric modelling of the channel. The array manifold vector is extended to the multi-carrier space-time array (MC-STAR) manifold matrix which enables the use of spatio-temporal signal processing techniques. Based on the modelling, a new cyclic pre x-free MC- CDMA arrayed MIMO communication system is proposed and its performance is compared with a representative existing system. Furthermore, a MUSIC-type algorithm is then developed for the estimation of the channel parameters of the received signal. This proposed cyclic pre x-free MC-CDMA arrayed MIMO system is then extended to consider the effects of spatial diffusion in the wireless channel. Spatial diffusion is an important channel impairment which is often ignored and the failure to consider such effects leads to less than satisfactory performance. A subspace-based approach is proposed for the estimation of the channel parameters and spatial spread and reception of the desired signal. Finally, the problem of joint optimization of the transmit and receive beam- forming weights in the downlink of a cyclic pre x-free MC-CDMA arrayed MIMO communication system is investigated. A subcarrier-cooperative approach is used for the transmit beamforming so that there is greater flexibility in the allocation of channel symbols. The resulting optimization problem, with a per-antenna transmit power constraint, is solved by the Lagrange multiplier method and an iterative algorithm is proposed

Blind estimation of long and short Pseudo-random codes in multi-rate LSC-DS-CDMA signals

Aiming at the problem of blind estimation of pseudo-noise codes in multi-rate long and short codes direct sequence code division multiple access signal, in this paper, a novel codes estimation method based on Fast-ICA algorithm and sequences properties is proposed in this paper. The received signal is firstly segmented twice according to its maximum long scrambling code period and minimum spreading code period. Each user’s composite code fragments consisting of long and short codes are separated by Fast-ICA algorithm. Then the user's long and short codes are estimated in descending order of the data rate, and the specific steps are as follows. Firstly, the separated composite code fragments make up the fuzzy sequences, and the double delay-and-multiply method is used to eliminate the order fuzzy and spread code interference. Secondly, combined with cyclotomic cosets and triple correlation properties, the method of feature information matching is used to estimate the long scrambling codes of all users with the same data rate. Meanwhile, the short spread codes are estimated by correlation operation. Lastly, all the estimated users’ composite code fragments are deleted by using similarity matrix, fuzzy sequences are reconstructed, and three steps above are repeated until all users’ long and short codes are estimated. Simulation results show the effectiveness of the proposed method. © 2019, North Atlantic University Union. All rights reserved

Doctor of Philosophy

dissertationWireless communications pervade all avenues of modern life. The rapid expansion of wireless services has increased the need for transmission schemes that are more spectrally efficient. Dynamic spectrum access (DSA) systems attempt to address this need by building a network where the spectrum is used opportunistically by all users based on local and regional measurements of its availability. One of the principal requirements in DSA systems is to initialize and maintain a control channel to link the nodes together. This should be done even before a complete spectral usage map is available. Additionally, with more users accessing the spectrum, it is important to maintain a stable link in the presence of significant interference in emergency first-responders, rescue, and defense applications. In this thesis, a new multicarrier spread spectrum (MC-SS) technique based on filter banks is presented. The new technique is called filter bank multicarrier spread spectrum (FB-MC-SS). A detailed theory of the underlying properties of this signal are given, with emphasis on the properties that lend themselves to synchronization at the receiver. Proposed algorithms for synchronization, channel estimation, and detection are implemented on a software-defined radio platform to complete an FB-MC-SS transceiver and to prove the practicality of the technique. FB-MC-SS is shown through physical experimentation to be significantly more robust to partial band interference compared to direct sequence spread spectrum. With a higher power interfering signal occupying 90% of its band, FB-MC-SS maintains a low bit error rate. Under the same interference conditions, DS-SS fails completely. This experimentation leads to a theoretical analysis that shows in a frequency selective channel with additive white noise, the FB-MC-SS system has performance that equals that obtained by a DS-SS system employing an optimal rake receiver. This thesis contains a detailed chapter on implementation and design, including lessons learned while prototyping the system. This is to assist future system designers to quickly gain proficiency in further development of this technology

Blind Detection, Parameters Estimation and Despreading of DS-CDMA Signals in Multirate Multiuser Cognitive Radio Systems

Open Access : http://www.intechopen.com/books/advances-in-cognitive-radio-systems/blind-detection-parameters-estimation-and-despreading-of-ds-cdma-signals-in-multirate-multiuser-cognInternational audienc

Doctor of Philosophy

dissertationA fundamental characteristic of wireless communications is in their broadcast nature, which allows accessibility of information without placing restrictions on a user’s location. However, the ease of accessibility also makes it vulnerable to eavesdropping. This dissertation considers the security issues of spread spectrum systems and in this context, a secure information transmission system compromised of two main parts is presented. The first component makes use of the principle of reciprocity in frequency-selective wireless channels to derive a pair of keys for two legitimate parties. The proposed key generation algorithm allows for two asynchronous transceivers to derive a pair of similar keys. Moreover, a unique augmentation - called strongest path cancellation (SPC) - is applied to the keys and has been validated through simulation and real-world measurements to significantly boost the security level of the design. In the second part of the secure information transmission system, the concept of artificial noise is introduced to multicarrier spread spectrum systems. The keys generated in the first part of the protocol are used as spreading code sequences for the spread spectrum system. Artificial noise is added to further enhance the security of the communication setup. Two different attacks on the proposed security system are evaluated. First, a passive adversary following the same steps as the legitimate users to detect confidential information is considered. The second attack studies a more sophisticated adversary with significant blind detection capabilities