7,757 research outputs found

    Signal-perturbation-free semi-blind channel estimation for MIMO-OFDM systems

    Get PDF
    Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) has been considered as a strong candidate for the beyond 3G (B3G) wireless communication systems, due to its high data-rate wireless transmission performance. It is well known that the advantages promised by MIMO-OFDM systems rely on the precise knowledge of the channel state information (CSI). In real wireless environments, however, the channel condition is unknown. Therefore, channel estimation is of crucial importance in MIMO-OFDM systems. Semi-blind channel estimation as a combination of the training-based or pilot-assisted method and the pure blind approach is considered to be a feasible solution for practical wireless systems due to its better estimation accuracy as well as spectral efficiency. In this thesis, we address the semi-blind channel estimation issue of MIMO-OFDM systems with an objective to develop very efficient channel estimation approaches. In the first part of the dissertation, several nulling-based semi-blind approaches are presented for the estimation of time-domain MIMO-OFDM channels. By incorporating a blind constraint that is derived from MIMO linear prediction (LP) into a training-based least-square method, a semi-blind solution for the time-domain channel estimation is first obtained. It is revealed through a perturbation analysis that the semi-blind solution is not subject to signal perturbation and therefore is superior to pure blind estimation methods. The LP-based semi-blind method is then extended for the channel estimation of MIMO-OFDM systems with pulse-shaping. By exploiting the pulse-shaping filter in the transmitter and the matched filter in the receiver, a very efficient semi-blind approach is developed for the estimation of sampling duration based multipath channels. A frequency-domain correlation matrix estimation algorithm is also presented to facilitate the computation of time-domain second-order statistics required in the LP-based method. The nulling-based semi-blind estimation issue of sparse MIMO-OFDM channels is also addressed. By disclosing and using a relationship between the positions of the most significant taps (MST) of the sparse channel and the lags of nonzero correlation matrices of the received signal, a novel estimation approach consisting of the MST detection and the sparse channel estimation, both in a semi-blind fashion, is developed. An intensive simulation study of all the proposed nulling-based methods with comparison to some existing techniques is conducted, showing a significant superiority of the new methodologies. The second part of the dissertation is dedicated to the development of two signal-perturbation-free (SPF) semi-blind channel estimation algorithms based on a novel transmit scheme that bears partial information of the second-order statistics of the transmitted signal to receiver. It is proved that the new transmit scheme can completely cancel the signal perturbation error in the noise-free case, thereby improving largely the estimation accuracy of correlation matrix for channel estimation in noisy conditions. It is also shown that the overhead caused by the transmission of the 8PF data is negligible as compared to that of regular pilot signals. By using the proposed transmit scheme, a whitening rotation (WR)-based algorithm is first developed for frequency-domain MIMO-OFDM channel estimation. It is shown through both theoretical analysis and simulation study that the new WR-based algorithm significantly outperforms the conventional WR-based method and the nulling-based semi-blind method. By using MIMO linear prediction, the new WR-based algorithm utilizing the 8PF transmit scheme is then extended for time-domain MIMO-OFDM channel estimation. Computer simulations show that the proposed signal-perturbation-free LP-based semi-blind solution performs much better than the LP semi-blind method without using the proposed transmit scheme, the LS method as well as the nulling-based semi-blind method in terms of the MSE of the channel estimate

    ALOHA With Collision Resolution(ALOHA-CR): Theory and Software Defined Radio Implementation

    Full text link
    A cross-layer scheme, namely ALOHA With Collision Resolution (ALOHA-CR), is proposed for high throughput wireless communications in a cellular scenario. Transmissions occur in a time-slotted ALOHA-type fashion but with an important difference: simultaneous transmissions of two users can be successful. If more than two users transmit in the same slot the collision cannot be resolved and retransmission is required. If only one user transmits, the transmitted packet is recovered with some probability, depending on the state of the channel. If two users transmit the collision is resolved and the packets are recovered by first over-sampling the collision signal and then exploiting independent information about the two users that is contained in the signal polyphase components. The ALOHA-CR throughput is derived under the infinite backlog assumption and also under the assumption of finite backlog. The contention probability is determined under these two assumptions in order to maximize the network throughput and maintain stability. Queuing delay analysis for network users is also conducted. The performance of ALOHA-CR is demonstrated on the Wireless Open Access Research Platform (WARP) test-bed containing five software defined radio nodes. Analysis and test-bed results indicate that ALOHA-CR leads to significant increase in throughput and reduction of service delays

    SGD Frequency-Domain Space-Frequency Semiblind Multiuser Receiver with an Adaptive Optimal Mixing Parameter

    Get PDF
    A novel stochastic gradient descent frequency-domain (FD) space-frequency (SF) semiblind multiuser receiver with an adaptive optimal mixing parameter is proposed to improve performance of FD semiblind multiuser receivers with a fixed mixing parameters and reduces computational complexity of suboptimal FD semiblind multiuser receivers in SFBC downlink MIMO MC-CDMA systems where various numbers of users exist. The receiver exploits an adaptive mixing parameter to mix information ratio between the training-based mode and the blind-based mode. Analytical results prove that the optimal mixing parameter value relies on power and number of active loaded users existing in the system. Computer simulation results show that when the mixing parameter is adapted closely to the optimal mixing parameter value, the performance of the receiver outperforms existing FD SF adaptive step-size (AS) LMS semiblind based with a fixed mixing parameter and conventional FD SF AS-LMS training-based multiuser receivers in the MSE, SER and signal to interference plus noise ratio in both static and dynamic environments

    Blind Receiver Design for OFDM Systems Over Doubly Selective Channels

    Get PDF
    We develop blind data detectors for orthogonal frequency-division multiplexing (OFDM) systems over doubly selective channels by exploiting both frequency-domain and time-domain correlations of the received signal. We thus derive two blind data detectors: a time-domain data detector and a frequency-domain data detector. We also contribute a reduced complexity, suboptimal version of a time-domain data detector that performs robustly when the normalized Doppler rate is less than 3%. Our frequency-domain data detector and suboptimal time-domain data detector both result in integer least-squares (LS) problems. We propose the use of the V-BLAST detector and the sphere decoder. The time-domain data detector is not limited to the Doppler rates less than 3%, but cannot be posed as an integer LS problem. Our solution is to develop an iterative algorithm that starts from the suboptimal time-domain data detector output. We also propose channel estimation and prediction algorithms using a polynomial expansion model, and these estimators work with data detectors (decision-directed mode) to reduce the complexity. The estimators for the channel statistics and the noise variance are derived using the likelihood function for the data. Our blind data detectors are fairly robust against the parameter mismatch

    New Blind Block Synchronization for Transceivers Using Redundant Precoders

    Get PDF
    This paper studies the blind block synchronization problem in block transmission systems using linear redundant precoders (LRP). Two commonly used LRP systems, namely, zero padding (ZP) and cyclic prefix (CP) systems, are considered in this paper. In particular, the block synchronization problem in CP systems is a broader version of timing synchronization problem in the popular orthogonal frequency division multiplexing (OFDM) systems. The proposed algorithms exploit the rank deficiency property of the matrix composed of received blocks when the block synchronization is perfect and use a parameter called repetition index which can be chosen as any positive integer. Theoretical results suggest advantages in blind block synchronization performances when using a large repetition index. Furthermore, unlike previously reported algorithms, which require a large amount of received data, the proposed methods, with properly chosen repetition indices, guarantee correct block synchronization in absence of noise using only two received blocks in ZP systems and three in CP systems. Computer simulations are conducted to evaluate the performances of the proposed algorithms and compare them with previously reported algorithms. Simulation results not only verify the capability of the proposed algorithms to work with limited received data but also show significant improvements in the block synchronization error rate performance of the proposed algorithms over previously reported algorithms
    corecore