Prosomal-width-to-weight relationships in American horseshoe crabs (Limulus polyphemus): examining conversion factors used to estimate landings

Horseshoe crabs (Limulus polyphemus) are valued by many stakeholders, including the commercial fishing industry, biomedical companies, and environmental interest groups. We designed a study to test the accuracy of the conversion factors that were used by NOAA Fisheries and state agencies to estimate horseshoe crab landings before mandatory reporting that began in 1998. Our results indicate that the NOAA Fisheries conversion factor consistently overestimates the weight of male horseshoe crabs, particularly those from New England populations. Because of the inaccuracy of this and other conversion factors, states are now mandated to report the number (not biomass) and sex of landed horseshoe crabs. However, accurate estimates of biomass are still necessary for use in prediction models that are being developed to better manage the horseshoe crab fishery. We recommend that managers use the conversion factors presented in this study to convert current landing data from numbers to biomass of harvested horseshoe crabs for future assessments

Modeling Compatible Single-Tree Aboveground Biomass Equations of Masson Pine (Pinus massoniana) in South China

In the background of facing up to the global climate change, it is becoming the inevitable demand to add forest biomass estimation to national forest resource monitoring. The biomass equations to be developed for forest biomass estimation should be compatible with volume equations. Based on the tree volume and aboveground biomass data of Masson pine (Pinus Massoniana Lamb.) in south China, the one, two and three-variable aboveground biomass equations and biomass conversion functions compatible with tree volume equations were constructed using the error-in-variable simultaneous equations in this paper. The results showed: (i) the prediction precision of aboveground biomass estimates from one variable equation was more than 95%; (ii) the regressions of aboveground biomass equations improved slightly when tree height and crown width were used together with diameter on breast height, although the contributions to regressions were statistically significant; (iii) for biomass conversion function on one variable, the conversion factor was decreased with growing diameter, but for conversion function on two variables, the factor was increased with growing diameter while decreased with growing tree height

Interests and Policy Clashes in Conflict of Laws

Glycoside hydrolases (GHs) cleave glycosidic bonds in glycoconjugates, oligosaccharides and polysaccharides such as cellulose and various hemicelluloses. Mannan is a major group of hemicelluloses. In higher plants, they usually serve as storage carbohydrates in seeds and tubers or as structural polysaccharides cross-linking with cellulose/lignin in cell walls. In industrial fields, this renewable biomass component can be used in various areas such as production of biofuels and health-benefit manno-oligosaccharides; and mannan degrading enzymes, especially mannanases, are important molecular tools for controlling mannan polysaccharides properties in biomass conversion. In this thesis, the evolution, substrate specificity and subfamily classification of the most important GH family, i.e., glycoside hydrolase family 5 (GH5), are presented providing a powerful tool for exploring GH5 enzymes in search for enzymes with interesting properties for sustainable biomass conversion. Additionally, three GH5_7 mannanases from Arabidopsis thaliana (AtMan5-1, AtMan5-2 and AtMan5-6) were investigated in the present study. Bioinformatics tools, heterologous expression, and enzymology were applied in order to reveal the catalytic properties of the target enzymes, increase understanding of plant mannanase evolution, and evaluate their potential use in biomass conversion. This approach revealed: (1) AtMan5-1 exhibits mannan hydrolase/transglycosylase activity (MHT), (2) AtMan5-2 preferably degrades mannans with a glucomannan backbone, and (3) AtMan5-6 is a relatively thermotolerant enzyme showing high catalytic efficiency for conversion of glucomannan and galactomannan making this plant mannanase an interesting candidate for biotechnological applications of digesting various mannans. Moreover, these studies suggest an evolutionary diversification of plant mannanase enzymatic function.QC 20150224</p

Overexpression of GA20-OXIDASE1 impacts plant height, biomass allocation and saccharification efficiency in maize

Increased biomass yield and quality are of great importance for the improvement of feedstock for the biorefinery. For the production of bioethanol, both stem biomass yield and the conversion efficiency of the polysaccharides in the cell wall to fermentable sugars are of relevance. Increasing the endogenous levels of gibberellic acid (GA) by ectopic expression of GA20-OXIDASE1 (GA20-OX1), the rate-limiting step in GA biosynthesis, is known to affect cell division and cell expansion, resulting in larger plants and organs in several plant species. In this study, we examined biomass yield and quality traits of maize plants overexpressing GA20-OX1 (GA20-OX1). GA20-OX1 plants accumulated more vegetative biomass than control plants in greenhouse experiments, but not consistently over two years of field trials. The stems of these plants were longer but also more slender. Investigation of GA20-OX1 biomass quality using biochemical analyses showed the presence of more cellulose, lignin and cell wall residue. Cell wall analysis as well as expression analysis of lignin biosynthetic genes in developing stems revealed that cellulose and lignin were deposited earlier in development. Pretreatment of GA20-OX1 biomass with NaOH resulted in a higher saccharification efficiency per unit of dry weight, in agreement with the higher cellulose content. On the other hand, the cellulose-to-glucose conversion was slower upon HCl or hot-water pretreatment, presumably due to the higher lignin content. This study showed that biomass yield and quality traits can be interconnected, which is important for the development of future breeding strategies to improve lignocellulosic feedstock for bioethanol production

Estimation of biomass density and carbon storage in the forests of Andhra Pradesh, India, with emphasis on their deforestation and degradation conditions

The current study evaluates the growing stock, biomass and carbon content of Andhra Pradesh state’s forest&nbsp;(India) along with its current status of forest degradation and loss. For this purpose, the study used the growing&nbsp;stock data collected by state forest department in 2010 for the calculation of biomass and carbon storage using the standard conversion and expansion factors given by IPCC. The analysis shows low biomass and carbon&nbsp;values for the state’s forest in comparison to the mean values recorded in different studies made for Andhra&nbsp;Pradesh. It is also observed to be lower when compared with the average carbon and biomass for Indian forests.&nbsp;Overall, the analysis showed degradation and loss of forest in the state, coupled with reduction in biomass and carbon sink

Liquefaction of empty palm fruit bunch (EPFB) in alkaline hot compressed water

Effect of alkalis (NaOH, KOH and K2CO3) on liquefaction of EPFB (emptypalmfruitbunch) biomass liquefaction was investigated under subcritical water conditions in a batch reactor operating at 270 °C and 20 bars for a period of 20 min. Catalytic performance and suitable biomass to water ratio that supported higher EPFB conversion, liquid hydrocarbons yield and lignin degradations were screened. Analytical results indicate that maximum of 68 wt% liquids were produced along with 72.4 wt% EPFB mass conversions and 65.6 wt% lignin degradation under 1.0 M K2CO3/2:10 (biomass/water) conditions. In comparison, the experiments that were performed in the absence of alkalis yielded only 30.4 wt% liquids, converted 36 wt% EPFB and degraded 24.3 wt% lignin. Furthermore, biomass to water ratios >2:10 decreased both solid mass conversion and liquid hydrocarbons' yield. The reactivity of the alkalis was in the order of K2CO3 > KOH > NaOH. The liquid compositions were dominantly phenols and esters; the highest value of phenol (60.1 wt% of liquid yield) was achieved in the case of K2CO3 (1.0 M) with 5 g EPFB/25 ml water ratio while 1.0 M NaOH yielded maximum esters (86.4 wt% of liquid yield). The alkali promoted process assisted with hotwater treatments seemed promising for production of bio-oils from EPFB

Clean fuels from biomass

The feasibility of converting biomass to portable fuels is studied. Since plants synthesize biomass from H2O and CO2 with the help of solar energy, the conversion methods of pyrolysis, anaerobic fermentation, and hydrogenation are considered. Cost reduction methods and cost effectiveness are emphasized

Biomass Conversion into Solid Composite Fuel for Bed-Combustion

The purpose of this research is the conversion of different types of biomass into solid composite fuel. The subject of research is the heat conversion of biomass into solid composite fuel. The research object is the biomass of the Tomsk region (Russia): peat, waste wood, lake sapropel. Physical experiment of biomass conversion is used as method of research. The new experimental unit for thermal conversion of biomass into carbon residue, fuel gas and pyrolysis condensate is described. As a result of research such parameters are obtained: thermotechnical biomass characteristics, material balances and product characteristics of the heat-technology conversion. Different methods of obtaining solid composite fuel from the products of thermal technologies are considered. As a result, it is established: heat-technology provides efficient conversion of the wood chips and peat; conversion of the lake sapropel is inefficient since the solid composite fuel has the high ash content and net calorific value

Biomass Conversion into Solid Composite Fuel for Bed-Combustion

The purpose of this research is the conversion of different types of biomass into solid composite fuel. The subject of research is the heat conversion of biomass into solid composite fuel. The research object is the biomass of the Tomsk region (Russia): peat, waste wood, lake sapropel. Physical experiment of biomass conversion is used as method of research. The new experimental unit for thermal conversion of biomass into carbon residue, fuel gas and pyrolysis condensate is described. As a result of research such parameters are obtained: thermotechnical biomass characteristics, material balances and product characteristics of the heat-technology conversion. Different methods of obtaining solid composite fuel from the products of thermal technologies are considered. As a result, it is established: heat-technology provides efficient conversion of the wood chips and peat; conversion of the lake sapropel is inefficient since the solid composite fuel has the high ash content and net calorific value

An optimization model for multi-biomass tri-generation energy supply

In this paper, a decision support system (DSS) for multi-biomass energy conversion applications is presented. The system in question aims at supporting an investor by thoroughly assessing an investment in locally existing multi-biomass exploitation for tri-generation applications (electricity, heating and cooling), in a given area. The approach followed combines use of holistic modelling of the system, including the multi-biomass supply chain, the energy conversion facility and the district heating and cooling network, with optimization of the major investment-related variables to maximize the financial yield of the investment. The consideration of multi-biomass supply chain presents significant potential for cost reduction, by allowing spreading of capital costs and reducing warehousing requirements, especially when seasonal biomass types are concerned. The investment variables concern the location of the bioenergy exploitation facility and its sizing, as well as the types of biomass to be procured, the respective quantities and the maximum collection distance for each type. A hybrid optimization method is employed to overcome the inherent limitations of every single method. The system is demand-driven, meaning that its primary aim is to fully satisfy the energy demand of the customers. Therefore, the model is a practical tool in the hands of an investor to assess and optimize in financial terms an investment aiming at covering real energy demand. optimization is performed taking into account various technical, regulatory, social and logical constraints. The model characteristics and advantages are highlighted through a case study applied to a municipality of Thessaly, Greece. (C) 2008 Elsevier Ltd. All rights reserved