Biofouling Effects on the Response of a Wave Measurement Buoy in Deep Water

AbstractThe effects of biofouling on a wave measurement buoy are examined using concurrent data collected with two Datawell Waveriders at Ocean Station P: one heavily biofouled at the end of a 26-month deployment, the other newly deployed and clean. The effects are limited to the high-frequency response of the buoy and are correctly diagnosed with the spectral “check factors” that compare horizontal and vertical displacements. A simple prediction for the progressive change in frequency response during biofouling reproduces the check factors over time. The bulk statistical parameters of significant wave height, peak period, average period, and peak direction are only slightly affected by the biofouling because the contaminated frequencies have very low energy throughout the comparison dataset.</jats:p

The bromotyrosine derivative Ianthelline isolated from the Arctic marine sponge Stryphnus fortis inhibits marine micro- and macrobiofouling

International audienceThe inhibition of marine biofouling by the bromotyrosine derivative ianthelline, isolated from the Arctic marine sponge Stryphnus fortis, is described. All major stages of the fouling process are investigated. The effect of ianthelline on adhesion and growth of marine bacteria and microalgae is tested to investigate its influence on the initial microfouling process comparing with the known marine antifoulant barettin as a reference. Macrofouling is studied via barnacle (Balanus improvisus) settlement assays and blue mussel (Mytilus edulis) phenoloxidase inhibition. Ianthelline is shown to inhibit both marine micro-and macrofoulers with a pronounced effect on marine bacteria (minimum inhibitory concentration (MIC) values 0.1-10 mu g/mL) and barnacle larval settlement (IC50= 3.0 mu g/mL). Moderate effects are recorded on M. edulis (IC50= 45.2 mu g/mL) and microalgae, where growth is more affected than surface adhesion. The effect of ianthelline is also investigated against human pathogenic bacteria. Ianthelline displayed low micromolar MIC values against several bacterial strains, both Gram positive and Gram negative, down to 2.5 mu g/mL. In summary, the effect of ianthelline on 20 different representative marine antifouling organisms and seven human pathogenic bacterial strains is presented

Variations of biofouling communities in an off-shore fish cage farm from North-Western Sardinia = Variazioni del biofouling in un allevamento ittico in gabbie off-shore della Sardegna nord-occidentale

Biofouling variations were studied in a fish farming facility near Alghero (Italy) between November 2007 and November 2008. Net panels suitable for the settlement of encrusting organisms were immersed in cages in which large and small gilthead seabream specimens were reared. Significant differences in biofouling biomass and coverage were observed between cages containing fish and controls. The results obtained revealed that gilthead seabream can exert a crucial role in controlling biofouling growth, independently from its size

Automated Image Analysis of Offshore Infrastructure Marine Biofouling

Supplementary Materials: The following are available online at www.mdpi.com/2077-1312/6/1/2/s1 Acknowledgments: This project was funded by the Natural Environmental Research Council (NERC) project No.: NE/N019865/1. The authors would like to thank Melanie Netherway and Don Orr, from our project partner (company requested to remain anonymous) for the provision of survey footage and for supporting the project. In addition, many thanks to Oscar Beijbom, University California Berkley for providing guidance and support to the project. Additional thanks to Calum Reay, Bibby Offshore; George Gair, Subsea 7; and Alan Buchan, Wood Group Kenny for help with footage collection and for allowing us to host workshops with them and their teams, their feedback and insights were very much appreciated.Peer reviewedPublisher PD

Toward a Global Regime of Vessel Anti-Fouling

Vessel anti-fouling is key to the efficient operation of ships, and essential for effective control of invasive species introduced through international shipping. Anti-Fouling Systems, however, pose their own threats to marine environments. The Anti-Fouling Convention of 2001 banned the use of organotin compounds such as Tributyltin, and created a system for adoption of alternative anti-fouling biocides. In 2011, the Marine Environmental Protection Committee of the International Maritime Organization (IMO) released guidelines on bio-fouling management record keeping, installation, inspection, cleaning, maintenance, design and construction. Though these Guidelines provide a template for more effective and environmentally sound anti-fouling control and implementation, they are not mandatory. This article proposes that the member states of the IMO adopt the 2011 Guidelines as a mandatory instrument

Description of the biofouling phenomena affecting membranes by the boundary flux concept

Membrane fouling, showing up with a significant reduction of process productivity and membrane lifetime, is one of the main issues in membrane technologies and has been successfully described by the boundary flux concept. Although the concept was applied for both organic and inorganic fouling, biofouling enjoys partial treatises in literature. In this work, a model extending the boundary flux concept to biofouling issues was developed. A population dynamics-based model considering the development of a fouling layer originated by attached growing biomass on the surface of the membrane using nutrients and substrates available in the processed feed has been developed. The manuscript highlights the critical aspects of the developed model and the possible connection points between it and the boundary flux concept

Efficacy of different antifouling treatments for seawater cooling systems

In an industrial seawater cooling system, the effects of three different antifouling treatments, viz. sodium hypochlorite (NaClO), aliphatic amines (Mexel1432) and UV radiation, on the characteristics of the fouling formed were evaluated. For this study a portable pilot plant, as a side-stream monitoring system and seawater cooling system, was employed. The pilot plant simulated a power plant steam condenser, having four titanium tubes under different treatment patterns, where fouling progression could be monitored. The nature of the fouling obtained was chiefly inorganic, showing a clear dependence on the antifouling treatment employed. After 72 days the tubes under treatment showed a reduction in the heat transfer resistance (R) of around 70% for NaClO, 48% for aliphatic amines and 55% for UV, with respect to the untreated tube. The use of a logistic model was very useful for predicting the fouling progression and the maximum asymptotic value of the increment in the heat transfer resistance (DRmax). The apparent thermal conductivity (l) of the fouling layer showed a direct relationship with the percentage of organic matter in the collected fouling. The characteristics and mode of action of the different treatments used led to fouling with diverse physicochemical properties

Innovating on Well Biofouling Remediation: A Bacteriophage Cocktail Approach

Waller Creek Working Grou