Enhancing methane production from food waste fermentate using biochar. The added value of electrochemical testing in pre-selecting the most effective type of biochar

Background: Recent studies have suggested that addition of electrically conductive biochar particles is an effective strategy to improve the methanogenic conversion of waste organic substrates, by promoting syntrophic associations between acetogenic and methanogenic organisms based on interspecies electron transfer processes. However, the underlying fundamentals of the process are still largely speculative and, therefore, a priori identification, screening, and even design of suitable biochar materials for a given biotechnological process are not yet possible. Results: Here, three charcoal-like products (i.e., biochars) obtained from the pyrolysis of different lignocellulosic materials, (i.e., wheat bran pellets, coppiced woodlands, and orchard pruning) were tested for their capacity to enhance methane production from a food waste fermentate. In all biochar-supplemented (25 g/L) batch experiments, the complete methanogenic conversion of fermentate volatile fatty acids proceeded at a rate that was up to 5 times higher than that observed in the unamended (or sand-supplemented) controls. Fluorescent in situ hybridization analysis coupled with confocal laser scanning microscopy revealed an intimate association between archaea and bacteria around the biochar particles and provided a clear indication that biochar also shaped the composition of the microbial consortium. Based on the application of a suite of physico-chemical and electrochemical characterization techniques, we demonstrated that the positive effect of biochar is directly related to the electron-donating capacity (EDC) of the material, but is independent of its bulk electrical conductivity and specific surface area. The latter properties were all previously hypothesized to play a major role in the biochar-mediated interspecies electron transfer process in methanogenic consortia. Conclusions: Collectively, these results of this study suggest that for biochar addition in anaerobic digester operation, the screening and identification of the most suitable biochar material should be based on EDC determination, via simple electrochemical tests. © 2017 The Author(s)

Can biochar ameliorate phosphorus deficiency and aluminium phytotoxicity in acid soils? : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy of Applied Science in Soil Science at Massey University, Palmerston North, New Zealand

The use of biochar as soil amendment to enhance soil functionality is being increasingly investigated, with particular attention given to its effects on the sustainable increase of crop production and carbon (C) sequestration. To date, however, limited research has attempted to unravel the effect of biochar on either the chemical and/or biological mobilization of the residual fraction of phosphorus (P) in soil. This fraction tends to accumulate as a result of long–term P fertilization in soils rich in aluminium (Al) and iron (Fe) oxy–hydroxides and short–range ordered aluminosilicates (i.e. allophane). There is also scant information on (i) how the speciation of soluble Al changes when biochar is applied to acid soils, and (ii) whether this application alleviates Al toxicity on plant roots. My objective in this study is therefore to determine the effect of different biochars with contrasting fertilizer and liming values on the chemistry, biology and nutrient fertility of acid mineral soils. Before studying the effect of different biochars on soil properties, several methodologies for measuring the liming properties and available nitrogen (N) in biochar were evaluated and modified where needed. For this, 19 biochars produced by pyrolysing a wide range of feedstocks under various production temperatures were used. Different pH–buffering capacity (pH–BC) methodologies – originally developed for soils (single vs multiple acid additions, short vs long equilibration times) – were tested, along with the methodology used to measure the liming equivalence. The methodologies were then validated by incubating over 10 d two acid soils (an Haplic Cambisol and an Andic Umbrisol) to which separated amendments of the 19 biochars were made at the rates estimated using both methodologies to target a final pH of 6.5 The results indicated that the relationship established between the pH–BC of the 19 biochars under study after 30–min equilibration (pH–BC30min) with a single addition of acid and that obtained after a 5–d equilibration (pH–BC5d) (predicted pH–BC5d = 2.2 × pH–BC30min + 20.4) allowed an adequate estimate of the liming potential of biochars. Similar results were found with the liming equivalent, and both methods were considered suitable to make the recommendation of the application rate. Acid hydrolysis using 6 M HCl has been proved adequate to determine available N in biochar. For this, hydrolysates of biochar are oxidized using potassium peroxodisulfate with a dilution factor of 600 so that chloride interferences are overcome and nitrate–N is then measured. This methodology, originally developed using biochars rich in N, proved not suitable for biochars with low N concentrations. Results obtained in this study have shown that a smaller dilution factor (242) is sufficiently adequate to overcome the chloride interferences while avoiding over–diluting the sample. In this study, we hypothesized that biochar can increase P availability to plant by stimulating the growth of arbuscular mycorrhizal fungi (AMF) hyphae. Therefore, methodologies to (i) estimate the length of fungal hyphae in soil and (ii) evaluate the transfer of P by AMF hyphae needed to be tested and modified where necessary. In this part of the study, three different biochars and two soil types were used. Two biochars were produced from chipped pine (Pinus radiata D. Don) branches at 450oC and 550°C (referred to as BP450 and BP550, respectively); and a third one from chipped weeping willow (Salix matsudana L.) branches at 550°C (referred to as BW550). The soils were two sil–andic Andosols of contrasting P status (Olsen P of 4.3 vs 33.3 mg kg–1, referred to as LP and HP soil, respectively). The traditional visual gridline intersection (VGI) method commonly used to measure the length of AMF hyphae distribution in soil was modified by (i) using a digital photomicrography technique (referred to as “digital gridline intersection” (DGI) method), and (ii) processing the images using ImageJ software (referred to as the “photomicrography–ImageJ processing” (PIP) method). These methods were first tested with known lengths of possum fur and then applied to measuring the hyphal length in the LP and HP soils after a 32 wk experiment growing Lotus pedunculatus cv barsille. The study confirmed that the use of digital photomicrography in conjunction with either the grid–line intersection principle or image processing (with ImageJ software) is a suitable method for the measurement of AMF hyphal lengths in soils. In addition, the traditional root study container that divides the plant growth medium into two sections – (i) a root zone to which both root and AMF hyphae have access and (ii) an hyphal zone to which only AMF hyphae have access – by a layer of nylon mesh was further modified by including a 3–mm thickness of tephra under the nylon mesh between two sections. This layer of tephra was found to be adequate to halt P diffusion from the HP soil to the LP soil for a plant growth period of 32 wk. Under such circumstances, the increase in P uptake by plant growth in a combination of a root zone of LP soil and a hyphal zone of HP soil compared with that in which both root and hyphal zones were filled with LP soil was only ascribed to the transfer of P from HP soil to LP soil by AMF hyphae. This novel root study container allows the biochar to be added to either the root zone or the hyphal zone and separates the effect of biochar on AMF hyphae development and P uptake from that on P content and availability (i.e., biochar rich in P; changes in soil pH). This device can contribute to discern whether biochar can influence AMF development and enhance P bioavailability. In order to investigate the feasibility of adding biochar to soils with high residual P so that this can become bioavailable, Lotus pedunculatus cv barsille was grown in LP and HP soils separately amended with BP450, BP550 and BW550 biochars at an application rate of 10 t ha–1 using the novel root study container for 32 wk without any further P and N fertilization. We found that (i) none of the tested biochars conferred any specific advantage to the HP soil; (ii) the addition of BW550 biochar to the LP soil increased plant growth by 59% and P uptake by 73%, while the pine–based biochar (e.g., BP450 and BP550) provided no extra nutrient uptake and no plant growth increase. This was ascribed to supplemental nutrients (especially P) from the BW550 biochar along with its liming effect and associated increase in P availability; (iii) biochar produced from BP450 biochar caused a 70% P uptake increase (and 40% plant growth increase) by stimulating AMF growth and accessing a high–P area (HP soil) to which the plant root had no access. More research is needed to discern the underlying mechanism. The liming effects of BW550 and BP550 biochars were further compared with those of lime chemicals (e.g., Ca(OH)2 and NaOH) in a short–term (10–d) incubation using two soils with contrasting pH–BC (an Haplic Cambisol and an Andic Umbrisol) to which these amendments were added. The two soils were first amended with BW550, BP550, Ca(OH)2 or NaOH at specific rates so that pH values of 5.4, 5.6, 5.8 and 6.4 were targeted and incubated at room temperature (25 oC) for 10 d. At the end of the incubation, a radical elongation bioassay using alfalfa (Medicago sativa L.) was carried out. Thereafter, soils were characterized with special attention to the Al chemistry, i.e. aqueous reactive Al fractionation and inorganic monomeric Al speciation. The final objective was to reveal the mechanisms through which these biochars alleviate Al toxicity on roots. Results showed that, for a specific soil, a smaller amount of BW550 biochar was required to increase the same unit of pH and reduce a similar amount of exchangeable Al compared with the amount required of BP550 biochar. The addition of BW550 biochar (at application rates < 9.1 %) and Ca(OH)2 stimulated alfalfa (Medicago sativa L.) seedling growth, whereas that of BP550 (at application rates > 2.4 %) and NaOH caused inhibition. The distinct responses of the root growth to the presence of Ca(OH)2 and BW550 biochar and to that of NaOH and BP550 biochar were explained by (i) a decrease in both inorganic monomeric Al (mainly in AlF2+ and Al3+) and colloidal Al, and (ii) an increase in aqueous Ca2+, in the former, as expected. In the latter there was (i) an increase in aqueous colloidal Al and Na+, and (ii) a decrease in soluble Ca2+. Thus, BW550 biochar was shown to be a more effective liming agent than was BP550 biochar. The information obtained in this thesis supports the use of biochar to manage high P affinity Andosols and acid soils, which are abundant in New Zealand. The technology of producing biochar from willow woodchips or feedstock alike with resultant solid products of high nutrient status and liming potential may contribute to the recycle of nutrients while increasing soil pH. Pine woodchips produced at relatively low temperature (e.g., 450oC) have been shown to enhance AMF abundance and functionality. Thus, biochar with specific environmental and agricultural purposes should be tailored accordingly. The root study container with a layer of “P diffusion break” and the measurement of AMF hyphal length using the photomicrography in conjunction with image software analysis (e.g., ImageJ) will advance studies of the responses of AMF to soil additives (e.g., biochar or green waste) and their associated enhancement of soil functions

Ion Exchange for Nutrient Recovery Coupled with Biosolids-Derived Biochar Pretreatment to Remove Micropollutants

Wastewater, especially anaerobic treatment effluent, contains high ammonia nitrogen (NH4-N) and inorganic orthophosphate (PO4-P), which necessitate additional treatment to meet stringent discharge regulations. Ion exchange regeneration is a process that can be adopted for not only removing but also recovering nutrients. However, recovering nutrients by ion exchange from nutrient-rich effluents that also contain micropollutants (which typically pass through anaerobic treatment as well) may result in subsequent problems, since micropollutants could end up in ion exchange effluent, regenerant, or recovered fertilizer products. Micropollutant removal by a nonselective adsorbent, such as biosolids-derived biochar, before nutrient recovery processes would mitigate potential risks. The objective of this research was to evaluate the capability of biosolids-derived biochar as a pretreatment step for separating micropollutants from nutrient-rich water before ion exchange for nutrient recovery. In the presence of ammonium and phosphate, both pristine and regenerated biosolids-derived biochar could effectively adsorb triclosan (TCS) and estradiol (E2), and to a lesser extent, sulfamethoxazole (SMX) in batch sorption experiments. On the other hand, nutrient ions were not effectively adsorbed by biosolids-derived biochar. A continuous flow-through system consisting of columns in series filled with biochar, LayneRT, and then clinoptilolite was operated to test selective removal of micropollutants and nutrients in a flow-through system. The biochar column achieved more than 80% removal of influent TCS and E2, thereby reducing the chances of micropollutants being adsorbed by ion exchangers. Sulfamethoxazole removal through the biochar column was only 50%, indicating that biosolids-derived biochar would have to be optimized in the future for hydrophilic micropollutant removal. Influent nutrients were not effectively removed by the biochar column, but were captured in their respective selective ion exchanger columns. This research revealed that biosolids-derived biochar could be employed before ion exchange resins for removal of micropollutants from nutrient-rich water

Enhancing methane production from food waste fermentate using biochar. The added value of electrochemical testing in pre-selecting the most effective type of biochar

Background: Recent studies have suggested that addition of electrically conductive biochar particles is an effective strategy to improve the methanogenic conversion of waste organic substrates, by promoting syntrophic associations between acetogenic and methanogenic organisms based on interspecies electron transfer processes. However, the underlying fundamentals of the process are still largely speculative and, therefore, a priori identification, screening, and even design of suitable biochar materials for a given biotechnological process are not yet possible. Results: Here, three charcoal-like products (i.e., biochars) obtained from the pyrolysis of different lignocellulosic materials, (i.e., wheat bran pellets, coppiced woodlands, and orchard pruning) were tested for their capacity to enhance methane production from a food waste fermentate. In all biochar-supplemented (25 g/L) batch experiments, the complete methanogenic conversion of fermentate volatile fatty acids proceeded at a rate that was up to 5 times higher than that observed in the unamended (or sand-supplemented) controls. Fluorescent in situ hybridization analysis coupled with confocal laser scanning microscopy revealed an intimate association between archaea and bacteria around the biochar particles and provided a clear indication that biochar also shaped the composition of the microbial consortium. Based on the application of a suite of physico-chemical and electrochemical characterization techniques, we demonstrated that the positive effect of biochar is directly related to the electron-donating capacity (EDC) of the material, but is independent of its bulk electrical conductivity and specific surface area. The latter properties were all previously hypothesized to play a major role in the biochar-mediated interspecies electron transfer process in methanogenic consortia. Conclusions: Collectively, these results of this study suggest that for biochar addition in anaerobic digester operation, the screening and identification of the most suitable biochar material should be based on EDC determination, via simple electrochemical tests. © 2017 The Author(s)

A critical review on sustainable biochar system through gasification: energy and environmental applications

This review lays great emphasis on production and characteristics of biochar through gasification. Specifically, the physicochemical properties and yield of biochar through the diverse gasification conditions associated with various types of biomass were extensively evaluated. In addition, potential application scenarios of biochar through gasification were explored and their environmental implications were discussed. To qualitatively evaluate biochar sustainability through the gasification process, all gasification products (i.e., syngas and biochar) were evaluated via life cycle assessment (LCA). A concept of balancing syngas and biochar production for an economically and environmentally feasible gasification system was proposed and relevant challenges and solutions were suggested in this review

Quantitative characterization of pore structure of several biochars with 3D imaging

Pore space characteristics of biochars may vary depending on the used raw material and processing technology. Pore structure has significant effects on the water retention properties of biochar amended soils. In this work, several biochars were characterized with three-dimensional imaging and image analysis. X-ray computed microtomography was used to image biochars at resolution of 1.14 $\mu$m and the obtained images were analysed for porosity, pore-size distribution, specific surface area and structural anisotropy. In addition, random walk simulations were used to relate structural anisotropy to diffusive transport. Image analysis showed that considerable part of the biochar volume consist of pores in size range relevant to hydrological processes and storage of plant available water. Porosity and pore-size distribution were found to depend on the biochar type and the structural anisotopy analysis showed that used raw material considerably affects the pore characteristics at micrometre scale. Therefore attention should be paid to raw material selection and quality in applications requiring optimized pore structure.Comment: 16 pages, 4 figures. The final publication is available at Springer via http://dx.doi.org/10.1007/s11356-017-8823-

Effect of pyrolysis temperature on ochratoxin A adsorption mechanisms and kinetics by cashew nut shell biochars

Biochars were produced from cashew nut shell at 400, 600 and 800°C. Production temperature significantly affected biochar properties and consequently the adsorption mechanisms of ochratoxin A. Biochars produced at higher temperatures had significantly higher specific surface areas, resulting in higher OTA adsorption ca-pacities. The isotherms and kinetics of the adsorption were used to identify the adsorption mechanisms. For the kinetics study, experiments were carried out after adjustment of the parameters influencing the system, such as pH, biochar quantity and OTA initial concentration. Experimental results were modelled according to isotherm equations representing Langmuir model and Freundlich model. Langmuir model matched best with the experi-mental data. The chemical surface reaction was fitted to a pseudo-second order equation, with very high re-gression coefficients

Assessment of <i>Miscanthus</i> × <i>giganteus</i> derived biochar as copper and zinc adsorbent:study of the effect of pyrolysis temperature, pH and hydrogen peroxide modification

In this work, experimental and modelling investigations were conducted on biochars pyrolyzed at 350 °C and 600 °C, to determine the effect of pyrolysis temperature, hydrogen peroxide activation and pH on copper and zinc removal, in comparison with commercially available activated carbons. Characterization of biochars was performed by BET surface area, elemental analysis and FTIR spectroscopy. Experiments results demonstrated that biochar pyrolyzed at 600 °C adsorbed both copper and zinc more efficiently than biochar pyrolyzed at 350 °C. Chemical activation by H2O2 increased the removal capacity of biochar pyrolyzed at 350 °C. All investigated biochars showed a stronger affinity for copper retention, with a maximum adsorption capacity of 15.7 mg/g while zinc was 10.4 mg/g. The best adsorption performances were obtained at pH 5 and 6. Langmuir adsorption isotherm described copper adsorption process satisfactorily, while zinc adsorption was better described by Freundlich isotherm

Biowęgiel z pofermentacyjnej pozostałości kukurydzy hybrydowej - tani i wydajny sorbent metali ciężkich

Biochar produced from fermentation residue of maize hybrid was used in untreated form as a sorbent for the removal of Cd(II), Pb(II) and Zn(II) from aqueous solution. The capability of biochar to immobilized ions was investigated by leaching test. Equilibrium between biochar sample and studied elements in solution was reached at a contact time 30 min for Zn(II) and 90 min for Pb(II) and Cd(II). The experimental data were described by pseudofirst-order and pseudo-second-order kinetic model, two- and three-parameter isotherms in non-linear form. The maximum sorption capacity achieved was 30.07 mg.g(-1) in the case of Cd(II) ions, 99.44 mg.g(-1) in the case of Pb( II) and 40.18 in the case of Zn(II). Biochar developed for this study is comparable to conventional biochar, low cost, non-toxic and experimental results show that is a suitable and efficient sorbent for Cd(II), Pb(II) and Zn(II) removal from aqueous solutions.Web of Science26475774