SMC based bilateral control

Design of a motion control system should take into account (a) unconstrained motion performed without interaction with environment or other system, and (b) constrained motion with system in contact with environment or another system or has certain functional interaction with another system. Control in both cases can be formulated in terms of maintaining desired system configuration what makes essentially the same structure for common tasks: trajectory tracking, interaction force control, compliance control etc. It will be shown that the same design approach can be used for systems that maintain some functional relation – like bilateral or multilateral systems, relation among mobile robots or control of haptic systems.

Bilateral Control with Vertical Contracts

A supplier is known to be subject to opportunism when contracting secretly with downstream competitors, particularly when downstream firms have "passive beliefs." We stress that in many situations, an equilibrium with passive beliefs may not exist and passive beliefs appear less plausible than "wary beliefs", introduced by McAfee and Schwartz, that account for multilateral deviations. We show that in a broad range of situations, equilibria with wary beliefs exist and reflect opportunism. Last, we confirm the insight, derived by O'Brien and Shaffer using a more ad-hoc equilibrium concept, that RPM eliminates the scope for opportunism.Opportunism, Secret Contracts, Beliefs, Resale Price Maintenance

Control and measurement delay compensation in bilateral position control

The main aim of this study is the improvement of the previously presented disturbance observer based bilateral control approaches of the authors with a delay regulator and a model tracking control (MTC) that runs on the slave side. These improvements eliminate the problems related to variable time delay inherent to such systems and model mismatch, respectively, and, hence, addressing the control and measurement delay problems in bilateral control applications. The performance is evaluated experimentally on a single-link arm controlled over the internet. The results demonstrate a significant improvement over the previously presented results obtained under load uncertainties and randomly varying network delays both in the control and feedback loop

Synchronized computational architecture for generalized bilateral control of robot arms

A master six degree of freedom Force Reflecting Hand Controller (FRHC) is available at a master site where a received image displays, in essentially real time, a remote robotic manipulator which is being controlled in the corresponding six degree freedom by command signals which are transmitted to the remote site in accordance with the movement of the FRHC at the master site. Software is user-initiated at the master site in order to establish the basic system conditions, and then a physical movement of the FRHC in Cartesean space is reflected at the master site by six absolute numbers that are sensed, translated and computed as a difference signal relative to the earlier position. The change in position is then transmitted in that differential signal form over a high speed synchronized bilateral communication channel which simultaneously returns robot-sensed response information to the master site as forces applied to the FRHC so that the FRHC reflects the feel of what is taking place at the remote site. A system wide clock rate is selected at a sufficiently high rate that the operator at the master site experiences the Force Reflecting operation in real time

Experimental results with a six-degree-of-freedom force-reflecting hand controller

Control experiments performed using an isotonic joystick connected to a six degree-of-freedom manipulator equipped with a six dimensional force-torque sensor at the base of the manipulator end effector are described. The preliminary control experiments were aimed at the investigation of the human operators' ability to command and control forces in different directions by varying the information conditions and the values of the feedforward and feedback command gains in the bilateral control loop. The main conclusions are: (1) a quantified graphic display of force-torque information can considerably enhance the operator's ability to perform a quantitatively sharp force-torque control, and (2) there seems to be a task dependent optimal combination of the feedforward and feedback command gain values which provide a dynamically smooth and stable bilateral control performance

Novel observers for compensation of communication delay in bilateral control systems

The problem of communication delay in bilateral or teleoperation systems is even more emphasized with the use of the internet for communication, which may give rise to loss of transparency and even instability. To address the problem, numerous methods have been proposed. This study is among the few recent studies taking a disturbance observer approach to the problem of time delay, and introduces a novel sliding-mode observer to overcome specifically the effects of communication delay in the feedback loop. The observer operates in combination with a PD+ controller which controls the system dynamics, while also compensating load torque uncertainties on the slave side. To this aim, an EKF based load estimation algorithm is performed on the slave side. The performance of this approach is tested with computer simulations for the teleoperation of a 1-DOF robotic arm. The simulations reveal an acceptable amount of accuracy and transparency between the estimated slave and actual slave position under both constant and random measurement delay and variable and step-type load variations on the slave side, motivating the use of the approach for internet-based bilateral control systems

Sliding modes in constrained systems control

Abstract—In this paper, a sliding-mode-based design framework for fully actuated mechanical multibody system is discussed. The framework is based on the possibility to represent complex motion as a collection of tasks and to find effective mapping of the system coordinates that allows decoupling task and constraint control so one is able to enforce concurrently, or in certain time succession, the task and the constraints. The approach seems naturally encompassing the control of motion systems in interaction, and it allows application to bilateral control, multilateral control, etc. Such an approach leads to a more natural interpretation of the system tasks, simpler controller design, and easier establishment of the systems hierarchy. It allows a unified mathematical treatment of task control in the presence of constraints required to be satisfied by the system coordinates. In order to show the applicability of the proposed techniques, simulation and experimental results for high-precision systems in microsystem assembly tasks and bilateral control systems are presented