ECG-Gated Three-dimensional Intravascular Ultrasound

Background Automated systems for the quantitative analysis of three-dimensional (3D) sets of intravascular ultrasound (IVUS) images have been developed to reduce the time required to perform volumetric analyses; however, 3D image reconstruction by these nongated systems is frequently hampered by cyclic artifacts. Methods and Results We used an ECG-gated 3D IVUS image acquisition workstation and a dedicated pullback device in atherosclerotic coronary segments of 30 patients to evaluate (1) the feasibility of this approach of image acquisition, (2) the reproducibility of an automated contour detection algorithm in measuring lumen, external elastic membrane, and plaque+media cross-sectional areas (CSAs) and volumes and the cross-sectional and volumetric plaque+media burden, and (3) the agreement between the automated area measurements and the results of manual tracing. The gated image acquisition took 3.9±1.5 minutes. The length of the segments analyzed was 9.6 to 40.0 mm, with 2.3±1.5 side branches per segment. The minimum lumen CSA measured 6.4±1.7 mm2, and the maximum and average CSA plaque+media burden measured 60.5±10.2% and 46.5±9.9%, respectively. The automated contour-detection required 34.3±7.3 minutes per segment. The differences between these measurements and manual tracing did not exceed 1.6% (SD<6.8%). Intraobserver and interobserver differences in area measurements (n=3421; r=.97 to.99) were <1.6% (SD<7.2%); intraobserver and interobserver differences in volumetric measurements (n=30; r=.99) were <0.4% (SD<3.2%). Conclusions ECG-gated acquisition of 3D IVUS image sets is feasible and permits the application of automated contour detection to provide reproducible measurements of the lumen and atherosclerotic plaque CSA and volume in a relatively short analysis time

Volumetric intracoronary ultrasound: a new maximum confidence approach for the quantitative assessment of progression-regression of atherosclerosis?

Quantitative assessment of atherosclerosis during its natural history and following therapeutic interventions is important, as cardiovascular disease remains the most significant cause of morbidity and mortality in industrial societies. While coronary angiography delineates the vessel lumen, permitting only the indirect determination of atherosclerotic wall changes encroaching upon the lumen, intracoronary ultrasound permits direct plaque assessment and quantification. The angiographic percent diameter stenosis, previously suggested as measure of a maximum confidence approach, is still commonly used to quantify stenosis severity, but the reference segments which are required for angiographic interpolation of the normal vessel dimensions are frequently involved in the general process of atherosclerosis, including progression or regression. Considering also the variability of vascular remodeling during the evolution of atherosclerosis, including compensatory enlargement and paradoxical arterial shrinkage, intracoronary ultrasound appears currently to be the only reliable technique to measure plaque burden and progression or regression of atherosclerosis. However, correct matching of the site of measurement at follow-up with the site of the initial ultrasound study is often difficult to achieve, but is significantly facilitated by the use of volumetric intracoronary ultrasound. This approach permits not only area measurement, but also measurement of plaque volume, which appears to be the ideal measure for quantifying the atherosclerotic plaque, as it is highly reproducible and directly reflects the changes of an entire arterial segment

Atherosclerotic coronary lesions with inadequate compensatory enlargement have smaller plaque and vessel volumes: observations with three dimensional intravascular ultrasound in vivo.

OBJECTIVE: To compare vessel, lumen, and plaque volumes in atherosclerotic coronary lesions with inadequate compensatory enlargement versus lesions with adequate compensatory enlargement. DESIGN: 35 angiographically significant coronary lesions were examined by intravascular ultrasound (IVUS) during motorised transducer pullback. Segments 20 mm in length were analysed using a validated automated three dimensional analysis system. IVUS was used to classify les

Computerized assessment of coronary lumen and atherosclerotic plaque dimensions in three-dimensional intravascular ultrasound correlated with histomorphometry.

Intravascular ultrasound (IVUS), which depicts both lumen and plaque, offers the potential to improve on the limitations of angiography for the assessment of the natural history of atherosclerosis and progression or regression of the disease. To facilitate measurements and increase the reproducibility of quantitative IVUS analyses, a computerized contour detection system was developed that detects both the luminal and external vessel boundaries in 3-dimensional sets of IVUS images. To validate this system, atherosclerotic human coronary segments (n = 13) with an area obstruction ≥40% (40% to 61%) were studied in vitro by IVUS. The computerized IVUS measurements (areas and volumes) of the lumen, total vessel, plaque-media complex, and percent obstruction were compared with findings by manual tracing of the IVUS images and of the corresponding histologic cross sections obtained at 2-mm increments (n = 100). Both area and volume measurements by the contour detection system agreed well with the results obtained by manual tracing, showing low mean between-method differences (−3.7% to 0.3%) with SDs not exceeding 6% and high correlation coefficients (r = 0.97 to 0.99). Measurements of the lumen, total vessel, plaque-media complex, and percent obstruction by the contour detection system correlated well with histomorphometry of areas (r = 0.94, 0.88, 0.80, and 0.88) and volumes (r = 0.98, 0.91, 0.83, and 0.91). Systematic differences between the results by the contour detection system and histomorphometry (29%, 13%, −9%, and −22%, respectively) were found, most likely resulting from shrinkage during tissue fixation. The result