High quality testing of grid style power gating

This paper shows that existing delay-based testing techniques for power gating exhibit fault coverage loss due to unconsidered delays introduced by the structure of the virtual voltage power-distribution-network (VPDN). To restore this loss, which could reach up to 70.3% on stuck-open faults, we propose a design-for-testability (DFT) logic that considers the impact of VPDN on fault coverage in order to constitute the proper interface between the VPDN and the DFT. The proposed logic can be easily implemented on-top of existing DFT solutions and its overhead is optimized by an algorithm that offers trade-off flexibility between test-application-time and hardware overhead. Through physical layout SPICE simulations, we show complete fault coverage recovery on stuck-open faults and 43.2% test-application-time improvement compared to a previously proposed DFT technique. To the best of our knowledge, this paper presents the first analysis of the VPDN impact on test qualit

Digital Centric Multi-Gigabit SerDes Design and Verification

Advances in semiconductor manufacturing still lead to ever decreasing feature sizes and constantly allow higher degrees of integration in application specific integrated circuits (ASICs). Therefore the bandwidth requirements on the external interfaces of such systems on chips (SoC) are steadily growing. Yet, as the number of pins on these ASICs is not increasing in the same pace - known as pin limitation - the bandwidth per pin has to be increased. SerDes (Serializer/Deserializer) technology, which allows to transfer data serially at very high data rates of 25Gbps and more is a key technology to overcome pin limitation and exploit the computing power that can be achieved in todays SoCs. As such SerDes blocks together with the digital logic interfacing them form complex mixed signal systems, verification of performance and functional correctness is very challenging. In this thesis a novel mixed-signal design methodology is proposed, which tightly couples model and implementation in order to ensure consistency throughout the design cycles and hereby accelerate the overall implementation flow. A tool flow that has been developed is presented, which integrates well into state of the art electronic design automation (EDA) environments and enables the usage of this methodology in practice. Further, the design space of todays high-speed serial links is analyzed and an architecture is proposed, which pushes complexity into the digital domain in order to achieve robustness, portability between manufacturing processes and scaling with advanced node technologies. The all digital phase locked loop (PLL) and clock data recovery (CDR), which have been developed are described in detail. The developed design flow was used for the implementation of the SerDes architecture in a 28nm silicon process and proved to be indispensable for future projects

Panel: Looking Backwards and Forwards

Ten years ago, at 90 nanometers, EDA was challenged and deemed inadequate in dealing with increasing complexity, power consumption, and sub-wavelength lithography, thus harming the progress of mobile phones. Today, at 10 nanometers, integration capacity has increased by two orders of magnitude, power consumption has been successfully "tamed", and 193 nanometer immersion lithography is still relied upon. Also thanks to EDA, tools, methodologies, and flows that were originally devised for design enablement for the emerging technology nodes, have been successfully redeployed at the established technology nodes, where they represent a critical design differentiation factor. However, the battleground is changing again: after the billions of phones, trillions of "things" lie ahead. Moving forward, emerging and established technology nodes, digital and analog, hardware and software will be equally critical. What is EDA doing and, more important, what should EDA do - and is not doing - in order for the next decade to be as great as the past one? This panel session, moderated by EPFL Professor Giovanni De Micheli, gathers academia, semiconductor, and EDA industry to discuss the challenges and requirements of the new era

Covering conditions and algorithms for the synthesis of speed-independent circuits

Journal ArticleAbstract-This paper presents theory and algorithms for the synthesis of standard C-implementations of speed-independent circuits. These implementations are block-level circuits which may consist of atomic gates to perform complex functions in order to ensure hazard freedom. First, we present Boolean covering conditions that guarantee that the standard C-implementations operate correctly. Then, we present two algorithms that produce optimal solutions to the covering problem. The first algorithm is always applicable, but does not complete on large circuits. The second algorithm, motivated by our observation that our covering problem can often be solved with a single cube, finds the optimal single-cube solution when such a solution exists. When applicable, the second algorithm is dramatically more efficient than the first, more general algorithm. We present results for benchmark specifications which indicate that our single-cube algorithm is applicable on most benchmark circuits and reduces run times by over an order of magnitude. The block-level circuits generated by our algorithms are a good starting point for tools that perform technology mapping to obtain gate-level speed independent circuits

Cost modelling and concurrent engineering for testable design

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.As integrated circuits and printed circuit boards increase in complexity, testing becomes a major cost factor of the design and production of the complex devices. Testability has to be considered during the design of complex electronic systems, and automatic test systems have to be used in order to facilitate the test. This fact is now widely accepted in industry. Both design for testability and the usage of automatic test systems aim at reducing the cost of production testing or, sometimes, making it possible at all. Many design for testability methods and test systems are available which can be configured into a production test strategy, in order to achieve high quality of the final product. The designer has to select from the various options for creating a test strategy, by maximising the quality and minimising the total cost for the electronic system. This thesis presents a methodology for test strategy generation which is based on consideration of the economics during the life cycle of the electronic system. This methodology is a concurrent engineering approach which takes into account all effects of a test strategy on the electronic system during its life cycle by evaluating its related cost. This objective methodology is used in an original test strategy planning advisory system, which allows for test strategy planning for VLSI circuits as well as for digital electronic systems. The cost models which are used for evaluating the economics of test strategies are described in detail and the test strategy planning system is presented. A methodology for making decisions which are based on estimated costing data is presented. Results of using the cost models and the test strategy planning system for evaluating the economics of test strategies for selected industrial designs are presented

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

NASA Space Engineering Research Center for VLSI systems design

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design

Analysis of Hardware Descriptions

The design process for integrated circuits requires a lot of analysis of circuit descriptions. An important class of analyses determines how easy it will be to determine if a physical component suffers from any manufacturing errors. As circuit complexities grow rapidly, the problem of testing circuits also becomes increasingly difficult. This thesis explores the potential for analysing a recent high level hardware description language called Ruby. In particular, we are interested in performing testability analyses of Ruby circuit descriptions. Ruby is ammenable to algebraic manipulation, so we have sought transformations that improve testability while preserving behaviour. The analysis of Ruby descriptions is performed by adapting a technique called abstract interpretation. This has been used successfully to analyse functional programs. This technique is most applicable where the analysis to be captured operates over structures isomorphic to the structure of the circuit. Many digital systems analysis tools require the circuit description to be given in some special form. This can lead to inconsistency between representations, and involves additional work converting between representations. We propose using the original description medium, in this case Ruby, for performing analyses. A related technique, called non-standard interpretation, is shown to be very useful for capturing many circuit analyses. An implementation of a system that performs non-standard interpretation forms the central part of the work. This allows Ruby descriptions to be analysed using alternative interpretations such test pattern generation and circuit layout interpretations. This system follows a similar approach to Boute's system semantics work and O'Donnell's work on Hydra. However, we have allowed a larger class of interpretations to be captured and offer a richer description language. The implementation presented here is constructed to allow a large degree of code sharing between different analyses. Several analyses have been implemented including simulation, test pattern generation and circuit layout. Non-standard interpretation provides a good framework for implementing these analyses. A general model for making non-standard interpretations is presented. Combining forms that combine two interpretations to produce a new interpretation are also introduced. This allows complex circuit analyses to be decomposed in a modular manner into smaller circuit analyses which can be built independently

Defect-based testing of LTS digital circuits

A Defect-Based Test (DBT) methodology for Superconductor Electronics (SCE) is presented in this thesis, so that commercial production and efficient testing of systems can be implemented in this technology in the future. In the first chapter, the features and prospects for SCE have been presented. The motivation for this research and the outline of the thesis were also described in Chapter 1. It has been shown that high-end applications such as Software-Defined Radio (SDR) and petaflop computers which are extremely difficult to implement in top-of-the-art semiconductor technologies can be realised using SCE. But, a systematic structural test methodology had yet to be developed for SCE and has been addressed in this thesis. A detailed introduction to Rapid Single-Flux Quantum (RSFQ) circuits was presented in Chapter 2. A Josephson Junction (JJ) was described with associated theory behind its operation. The JJ model used in the simulator used in this research work was also presented. RSFQ logic with logic protocols as well as the design and implementation of an example D-type flip-flop (DFF) was also introduced. Finally, advantages and disadvantages of RSFQ circuits have been discussed with focus on the latest developments in the field. Various techniques for testing RSFQ circuits were discussed in Chapter 3. A Process Defect Monitor (PDM) approach was presented for fabrication process analysis. The presented defect-monitor structures were used to gather measurement data, to find the probability of the occurrence of defects in the process which forms the first step for Inductive Fault Analysis (IFA). Results from measurements on these structures were used to create a database for defects. This information can be used as input for performing IFA. "Defect-sprinkling" over a fault-free circuit can be carried out according to the measured defect densities over various layers. After layout extraction and extensive fault simulation, the resulting information will indicate realistic faults. In addition, possible Design-for-Testability (DfT) schemes for monitoring Single-Flux Quantum (SFQ) pulses within an RSFQ circuit has also been discussed in Chapter 3. The requirement for a DfT scheme is inevitable for RSFQ circuits because of their very high frequency of operation and very low operating temperature. It was demonstrated how SFQ pulses can be monitored at an internal node of an SCE circuit, introducing observability using Test-Point Insertion (TPI). Various techniques were discussed for the introduction of DfT and to avoid the delay introduced by the DfT structure if it is required. The available features in the proposed design for customising the detector make it attractive for a detailed DBT of RSFQ circuits. The control of internal nodes has also been illustrated using TPI. The test structures that were designed and implemented to determine the occurrence of defects in the processes can also be used to locate the position for the insertion of the above mentioned DfT structures