2 research outputs found
A Reverse Localization Scheme for Underwater Acoustic Sensor Networks
Underwater Wireless Sensor Networks (UWSNs) provide new opportunities to observe and predict the behavior of aquatic environments. In some applications like target tracking or disaster prevention, sensed data is meaningless without location information. In this paper, we propose a novel 3D centralized, localization scheme for mobile underwater wireless sensor network, named Reverse Localization Scheme or RLS in short. RLS is an event-driven localization method triggered by detector sensors for launching localization process. RLS is suitable for surveillance applications that require very fast reactions to events and could report the location of the occurrence. In this method, mobile sensor nodes report the event toward the surface anchors as soon as they detect it. They do not require waiting to receive location information from anchors. Simulation results confirm that the proposed scheme improves the energy efficiency and reduces significantly localization response time with a proper level of accuracy in terms of mobility model of water currents. Major contributions of this method lie on reducing the numbers of message exchange for localization, saving the energy and decreasing the average localization response time
RF signal sensing and source localisation systems using Software Defined Radios
Radio frequency (RF) source localisation is a critical technology
in numerous location-based military and civilian applications. In
this thesis, the problem of RF source localisation has been
studied from the perspective of the system implementation for
real-world applications. Commercial off-the-shelf Software
Defined Radio (SDR) devices are used to demonstrate the practical
RF source localisation systems. Compared to the conventional
localisation systems, which rely on dedicated hardware, the
SDR-based system is developed using general-purpose hardware and
software-defined components, offering great flexibility and cost
efficiency in system design and implementation.
In this thesis, the theoretical results of source localisation
are evaluated and put into practice. To be specific, the
practical localisation systems using different measurement
techniques, including received-signal-strength-indication (RSSI)
measurements, time-difference-of-arrival (TDOA) measurements and
joint TDOA and frequency-difference-of-arrival (FDOA)
measurements, are demonstrated to localise the stationary RF
signal sources using the SDRs. The RSSI-based localisation system
is demonstrated in small indoor and outdoor areas with a range of
several metres using the SDR-based transceivers. Furthermore,
interests from the defence area motivated us to implement the
time-based localisation systems. The TDOA-based source
localisation system is implemented using multiple spatially
distributed SDRs in a large outdoor area with the sensor-target
range of several kilometres. Moreover, they are implemented in a
fully passive way without prior knowledge of the signal emitter,
so the solutions can be applied in the localisation of
non-cooperative signal sources provided that emitters are
distant. To further reduce the system cost, and more importantly,
to deal with the situation when the deployment of multiple SDRs,
due to geographical restrictions, is not feasible, a joint TDOA
and FDOA-based localisation system is also demonstrated using
only one stationary SDR and one mobile SDR.
To improve the localisation accuracy, the methods that can reduce
measurement error and obtain accurate location estimates are
studied. Firstly, to obtain a better understanding of the
measurement error, the error sources that affect the measurement
accuracy are systematically analysed from three aspects: the
hardware precision, the accuracy of signal processing methods,
and the environmental impact. Furthermore, the approaches to
reduce the measurement error are proposed and verified in the
experiments. Secondly, during the process of the location
estimation, the theoretical results on the pre-existing
localisation algorithms which can achieve a good trade-off
between the accuracy of location estimation and the computational
cost are evaluated, including the weight least-squares
(WLS)-based solution and the Extended Kalman Filter (EKF)-based
solution. In order to use the pre-existing algorithms in the
practical source localisation, the proper adjustments are
implemented.
Overall, the SDR-based platforms are able to achieve low-cost and
universal localisation solutions in the real-world environment.
The RSSI-based localisation system shows tens of centimetres of
accuracy in a range of several metres, which provides a useful
tool for the verification of the range-based localisation
algorithms. The localisation accuracy of the TDOA-based
localisation system and the joint TDOA and FDOA-based
localisation system is several tens of metres in a range of
several kilometres, which offers potential in the low-cost
localisation solutions in the defence area