Robust Low-Cost Multiple Antenna Processing for V2V Communication

Cooperative V2V communication with frequent, periodic broadcast of messages between vehicles is a key enabler of applications that increase traffic safety and traffic efficiency on roads. Such broadcast V2V communication requires an antenna system with omnidirectional coverage, which is difficult to achieve using a single antenna element. For a mounted, omnidirectional antenna on a vehicle is distorted by the vehicle body, and exhibits a nonuniform directional pattern with low gain in certain directions. The thesis addresses this problem by developing schemes that employ multiple antennas (MAs) to achieve an effective radiation pattern with omnidirectional characteristics at both the transmit- and the receive-side. To ensure robust communication, the MA schemes are designed to minimize the burst error probability of several consecutive status messages in a scarce multipath environment with a dominant path between vehicles.First, at the receive-side, we develop a hybrid analog-digital antenna combiner. The analog part of the combiner is composed of low-cost analog combining networks (ACNs) of phase shifters that do not depend on channel stateinformation (CSI), while the digital part uses maximal ratio combining. We show that the optimal phase slopes of the analog part of the combiner (i.e., the phase slopes that minimize the burst error probability) are the same found under the optimization of a single ACN, which was done in earlier work. We then show how directional antennas can be employed in this context to achieve an effective omnidirectional radiation pattern of the antenna system that is robust in all directions of arrival of received signals.Secondly, at the transmit-side, we develop two low-cost analog MA schemes, an analog beamforming network (ABN) of phase shifters, and an antenna switching network (ASN), for the case when receivers employ the ACN or the hybrid combiner. Both schemes are shown to achieve an effective radiation pattern with improved omnidirectional characteristics at the transmit-side without relying on CSI.Thirdly, the schemes above were developed assuming that all vehicles broadcast their messages with the same fixed period. Therefore, we tackle the practical scenario when different vehicles use different and potentially varying broadcast periods. We show that the phase slopes of the MA schemes at the receiver and/or transmitter can be designed to support multiple broadcast periods.\ua0Lastly, the optimal phase slopes of the MA schemes were analytically derived under a worst-case propagation corresponding to a dominant path with an angle of departure, and an angle of arrival that are approximately non-varying over the time it takes to transmit and receive several packets. We relax this assumption and study the system performance under a time-varying dominant component instead. We derive a design rule that yields robust phase slopes that effectively mitigate the losses due to the time-variation of the dominant path

Signalling Design in Sensor-Assisted mmWave Communications for Cooperative Driving

Millimeter-Wave (mmWave) Vehicle-To-Vehicle (V2V) communications are a key enabler for connected and automated vehicles, as they support the low-latency exchange of control signals and high-resolution imaging data for maneuvering coordination. The employment of mmWave V2V communications calls for Beam Alignment and Tracking (BAT) procedures to ensure that the antenna beams are properly steered during motion. The conventional beam sweeping approach is known to be unsuited for the high vehicular mobility and its large overhead reduces transmission efficiency. A promising solution to reduce BAT signalling foresees the integration of V2V communication systems with on-board vehicle sensors. We focus on a cooperative sensor-assisted architecture for mmWave V2V communications in line of sight, where vehicles exchange the estimate of antenna position and its uncertainty to compute the optimal beam direction and dimension. We analyze and compare different signalling strategies for sharing the information on antenna estimate, evaluating the tradeoff between signalling overhead and performance loss for different position and uncertainty encoding strategies. Main attention is given to differential quantization on both the antenna position and uncertainty. Analyses over realistic urban mobility trajectories suggest that differential approaches introduce a negligible performance loss while significantly reducing the BAT signalling communication overhead

Role of Reconfigurable Intelligent Surfaces in 6G Radio Localization: Recent Developments, Opportunities, Challenges, and Applications

Reconfigurable intelligent surfaces (RISs) are seen as a key enabler low-cost and energy-efficient technology for 6G radio communication and localization. In this paper, we aim to provide a comprehensive overview of the current research progress on the RIS technology in radio localization for 6G. Particularly, we discuss the RIS-assisted radio localization taxonomy and review the studies of RIS-assisted radio localization for different network scenarios, bands of transmission, deployment environments, as well as near-field operations. Based on this review, we highlight the future research directions, associated technical challenges, real-world applications, and limitations of RIS-assisted radio localization

6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities

Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages, 10 figures, 5 table

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium