Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

High throughput spatial convolution filters on FPGAs

Digital signal processing (DSP) on field- programmable gate arrays (FPGAs) has long been appealing because of the inherent parallelism in these computations that can be easily exploited to accelerate such algorithms. FPGAs have evolved significantly to further enhance the mapping of these algorithms, included additional hard blocks, such as the DSP blocks found in modern FPGAs. Although these DSP blocks can offer more efficient mapping of DSP computations, they are primarily designed for 1-D filter structures. We present a study on spatial convolutional filter implementations on FPGAs, optimizing around the structure of the DSP blocks to offer high throughput while maintaining the coefficient flexibility that other published architectures usually sacrifice. We show that it is possible to implement large filters for large 4K resolution image frames at frame rates of 30–60 FPS, while maintaining functional flexibility

Investigation into the wafer-scale integration of fine-grain parallel processing computer systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis investigates the potential of wafer-scale integration (WSI) for the implementation of low-cost fine-grain parallel processing computer systems. As WSI is a relatively new subject, there was little work on which to base investigations. Indeed, most WSI architectures existed only as untried and sometimes vague proposals. Accordingly, the research strategy approached this problem by identifying a representative WSI structure and architecture on which to base investigations. An analysis of architectural proposals identified associative memory to be general purpose parallel processing component used in a wide range of WSI architectures. Furthermore, this analysis provided a set of WSI-level design requirements to evaluate the sustainability of different architectures as research vehicles. The WSI-ASP (WASP) device, which has a large associative memory as its main component is shown to meet these requirements and hence was chosen as the research vehicle. Consequently, this thesis addresses WSI potential through an in-depth investigation into the feasibility of implementing a large associative memory for the WASP device that meets the demanding technological constraints of WSI. Overall, the thesis concludes that WSI offers significant potential for the implementation of low-cost fine-grain parallel processing computer systems. However, due to the dual constraints of thermal management and the area required for the power distribution network, power density is a major design constraint in WSI. Indeed, it is shown that WSI power densities need to be an order of magnitude lower than VLSI power densities. The thesis demonstrates that for associative memories at least, VLSI designs are unsuited to implementation in WSI. Rather, it is shown that WSI circuits must be closely matched to the operational environment to assure suitable power densities. These circuits are significantly larger than their VLSI equivalents. Nonetheless, the thesis demonstrates that by concentrating on the most power intensive circuits, it is possible to achieve acceptable power densities with only a modest increase in area overheads.SER

ACE16K: The Third Generation of Mixed-Signal SIMD-CNN ACE Chips Toward VSoCs

Today, with 0.18-μm technologies mature and stable enough for mixed-signal design with a large variety of CMOS compatible optical sensors available and with 0.09-μm technologies knocking at the door of designers, we can face the design of integrated systems, instead of just integrated circuits. In fact, significant progress has been made in the last few years toward the realization of vision systems on chips (VSoCs). Such VSoCs are eventually targeted to integrate within a semiconductor substrate the functions of optical sensing, image processing in space and time, high-level processing, and the control of actuators. The consecutive generations of ACE chips define a roadmap toward flexible VSoCs. These chips consist of arrays of mixed-signal processing elements (PEs) which operate in accordance with single instruction multiple data (SIMD) computing architectures and exhibit the functional features of CNN Universal Machines. They have been conceived to cover the early stages of the visual processing path in a fully-parallel manner, and hence more efficiently than DSP-based systems. Across the different generations, different improvements and modifications have been made looking to converge with the newest discoveries of neurobiologists regarding the behavior of natural retinas. This paper presents considerations pertaining to the design of a member of the third generation of ACE chips, namely to the so-called ACE16k chip. This chip, designed in a 0.35-μm standard CMOS technology, contains about 3.75 million transistors and exhibits peak computing figures of 330 GOPS, 3.6 GOPS/mm2 and 82.5 GOPS/W. Each PE in the array contains a reconfigurable computing kernel capable of calculating linear convolutions on 3×3 neighborhoods in less than 1.5 μs, imagewise Boolean combinations in less than 200 ns, imagewise arithmetic operations in about 5 μs, and CNN-like temporal evolutions with a time constant of about 0.5 μs. Unfortunately, the many ideas underlying the design of this chip cannot be covered in a single paper; hence, this paper is focused on, first, placing the ACE16k in the ACE chip roadmap and, then, discussing the most significant modifications of ACE16K versus its predecessors in the family.LOCUST IST2001—38 097VISTA TIC2003—09 817 - C02—01Office of Naval Research N000 140 210 88