Anatomical Region-Specific In Vivo Wireless Communication Channel Characterization

In vivo wireless body area networks (WBANs) and their associated technologies are shaping the future of healthcare by providing continuous health monitoring and noninvasive surgical capabilities, in addition to remote diagnostic and treatment of diseases. To fully exploit the potential of such devices, it is necessary to characterize the communication channel which will help to build reliable and high-performance communication systems. This paper presents an in vivo wireless communication channel characterization for male torso both numerically and experimentally (on a human cadaver) considering various organs at 915 MHz and 2.4 GHz. A statistical path loss (PL) model is introduced, and the anatomical region-specific parameters are provided. It is found that the mean PL in dB scale exhibits a linear decaying characteristic rather than an exponential decaying profile inside the body, and the power decay rate is approximately twice at 2.4 GHz as compared to 915 MHz. Moreover, the variance of shadowing increases significantly as the in vivo antenna is placed deeper inside the body since the main scatterers are present in the vicinity of the antenna. Multipath propagation characteristics are also investigated to facilitate proper waveform designs in the future wireless healthcare systems, and a rootmean- square (RMS) delay spread of 2.76 ns is observed at 5 cm depth. Results show that the in vivo channel exhibit different characteristics than the classical communication channels, and location dependency is very critical for accurate, reliable, and energy-efficient link budget calculations

Experimental Analysis of Ultra Wideband In Vivo Radio Channel

In this paper, we present the experimental analysis of in vivo wireless channel response on Ultra-Wideband (UWB) with the frequencies between 3.1-10.6 GHz. The analysis proves the location dependent based characteristics of in vivo channel. The results clearly show the highly multipath scenario. It can also be observed that the multipath effect of the channel is much higher in the denser areas, i.e. an antenna placed within the intestine area or inside the stomach. Results prove that in vivo channel is different from a conventional communication channel and therefore extensive studies need to be done to understand the channel

Bit Error Rate Performance of In-vivo Radio Channel Using Maximum Likelihood Sequence Estimation

In this paper we present the Bit Error Rate (BER) performance of equalizers using in-vivo channel response measured using Vector Network Analyzer (VNA). Including the use of a Bandwidth (BW) of 50 MHz in the simulations, the results are compared with multiple equalizers and it is shown that Maximum Likelihood Sequence Estimation (MLSE) equalizer outperformed the rest of the equalizers including linear equalizers Least Mean Square (LMS) and Recursive least sequence (RLS) and non-linear equalizer Decision Feedback Equalizer (DFE). The BER performance using MLSE showed significant improvement by improving the BER and outperforming the linear equalizer from 10 −2 to 10 −6 and DFE from 10 −4 to 10 −6 at Eb/No=14 dB for in vivo radio communication channel at ultra wideband (UWB) frequencies. Furthermore, the un-equalized and equalized channel frequency response spectrum is also part of this article which presents the overall improvement between the two spectrums

Waveform Design for 5G and Beyond

5G is envisioned to improve major key performance indicators (KPIs), such as peak data rate, spectral efficiency, power consumption, complexity, connection density, latency, and mobility. This chapter aims to provide a complete picture of the ongoing 5G waveform discussions and overviews the major candidates. It provides a brief description of the waveform and reveals the 5G use cases and waveform design requirements. The chapter presents the main features of cyclic prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in 4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since the performance of a new waveform is usually compared with it. The chapter examines the essential characteristics of the major waveform candidates along with the related advantages and disadvantages. It summarizes and compares the key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the final version: https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2

Location Dependent Channel Characteristics for Implantable Devices

This paper presents an impact on an in-vivo channel with respect to the position of ex-vivo antenna placement and its location. The paper also shows how the location of the antenna is impacting the channel. Three different parts are considered for the simulations using measured data for 500 MHz bandwidth. The results in the paper present the high location dependent characteristics of the in-vivo channel in the context of changing the position of the ex-vivo antenna. These findings can help in the system design for the future of the implantable devices design to be placed inside the human body

Evaluation of ultra-wideband in vivo radio channel and its effects on system performance

This paper presents bit‐error‐rate (BER) performance analysis and improvement using equalizers for an in vivo radio channel at ultra‐wideband frequencies (3.1 GHz to 10.6 GHz). By conducting simulations using a bandwidth of 50 MHz, we observed that the in vivo radio channel is affected by small‐scale fading. This fading results in intersymbol interference affecting upcoming symbol transmission, causing delayed versions of the symbols to arrive at the receiver side and causes increase in BER. A 29‐taps channel was observed from the experimentally measured data using a human cadaver, and BER was calculated for the measured in vivo channel response along with the ideal additive white Gaussian noise and Rayleigh channel models. Linear and nonlinear adaptive equalizers, ie, decision feedback equalizer (DFE) and least mean square (LMS), were used to improve the BER performance of the in vivo radio channel. It is noticed that both the equalizers improve the BER but DFE has better BER compared to LMS and shows the 2‐dB and 4‐dB performance gains of DFE over the LMS at Eb/No = 12 dB and at Eb/No = 14 dB, respectively. The current findings will help guide future researchers and designers in enhancing systems performance of an ultra‐wideband in vivo wireless systems

Securing health monitoring via body-centric time-frequency signature authorization

Identity-based attacks serve as the basis of an intruder’s attempt to launch security infringements in mobile health monitoring scenarios. Wireless channel perturbations due to the presence of human body are a relative phenomenon depending heavily on the subject’s dielectric properties. A new Body-Centric Signature Authorization (B-CSAI) approach based on time-frequency domain characteristics was proposed. This method utilizes multiple millimeter wave bands of 27-28 GHz, 29-30 GHz, and 31-32 GHz, thereby enhancing the security in body-centric communications exploiting benefits of subject specific channel signature. The proposed bornprint method is based on the intrinsic identity related time-frequency domain information, which generated by the user’s natural hand motion signature and resulting creeping waves and space waves. It can meet the unconditional keyless authorization requirements. A detailed measurement campaign considering radiation efficiency (η = -25.8, -24.7, -26.4), pathloss exponent, and shadowing factor in three millimeter wave bands, using six human subjects confirm the usability and efficiency of the proposed approach. This also shows that there is a wide space for realizing security from physical mechanisms

System design and performance analysis of wireless body area networks

One key solution to provide affordable and proactive healthcare facilities to overcome the fast world population growth and a shortage of medical professionals is through health monitoring systems capable of early disease detection and real-time data transmission leading to considerable improvements in the quality of human life. Wireless body area networks (WBANs) are proposed as promising approaches to providing better mobility and flexibility experience than traditional wired medical systems by using low-power, miniaturised sensors inside, around, or off the human body and are employed to monitor physiological signals. However, the design of reliable and energy efficient in-body communication systems is still a major research challenge since implant devices are characterised by strict requirements on size, energy consumption and safety. Moreover, there is still no agreement regarding QoS support in WBANs. The first part of this work concentrates on the design and performance evaluation of WBAN communication systems involving the ‘in-body to in-body’ and ‘in-body to on-body’ scenarios. The essential step is to derive the statistical WBAN path loss (PL) models, which characterise the signal propagation energy loss transmitting via intra-body region. Moreover, from the point of view of human body safety evaluation, the obtained specific absorption rate (SAR) values are compared with the latest Institute of Electrical and Electronics Engineers (IEEE) 802.15.6 Task Group technical standard and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) safety guidelines. Link budget analysis is then presented using a range of energy-efficient modulation schemes, and the results are given including the transmission distance, data rate and transmitting power in individual sections. On the other hand, major quality of service (QoS) support challenges in WBANs are discussed and investigated. To achieve higher lifetime and lower network energy consumption, different data routing protocol methods, including incremental relaying and the two-relay based routing technique are taken into account. A set of key QoS metrics for linear mathematical models is given along with the related subjective functions. The incremental relaying routing protocol promises significant enhancements in in-body WBAN network lifetime by minimising the overall communication distance while the two-relay based routing method achieves better performance in terms of emergency data transmission and high traffic condition, QoS-aware WBANs design. Moreover, to handle real-time high data transmission applications such as capsule endoscope image transmission, a flexible QoS-aware wireless body area sensor networks (WBASNs) model is proposed and evaluated that can bring novel solutions for a realistic multi-user hospital environment regarding information packet collision probability, manageable numbers of sensor nodes and a wide range of data rates