16,022 research outputs found
Analog Network Coding for Multi-User Spread-Spectrum Communication Systems
This work presents another look at an analog network coding scheme for
multi-user spread-spectrum communication systems. Our proposed system combines
coding and cooperation between a relay and users to boost the throughput and to
exploit interference. To this end, each pair of users, and
, that communicate with each other via a relay
shares the same spreading code. The relay has two roles, it synchronizes
network transmissions and it broadcasts the combined signals received from
users. From user 's point of view, the signal is decoded, and
then, the data transmitted by user is recovered by subtracting
user 's own data. We derive the analytical performance of this
system for an additive white Gaussian noise channel with the presence of
multi-user interference, and we confirm its accuracy by simulation.Comment: 6 pages, 2 figures, to appear at IEEE WCNC'1
Study of spread spectrum multiple access systems for satellite communications with overlay on current services
The feasibility of using spread spectrum techniques to provide a low-cost multiple access system for a very large number of low data terminals was investigated. Two applications of spread spectrum technology to very small aperture terminal (VSAT) satellite communication networks are presented. Two spread spectrum multiple access systems which use a form of noncoherent M-ary FSK (MFSK) as the primary modulation are described and the throughput analyzed. The analysis considers such factors as satellite power constraints and adjacent satellite interference. Also considered is the effect of on-board processing on the multiple access efficiency and the feasibility of overlaying low data rate spread spectrum signals on existing satellite traffic as a form of frequency reuse is investigated. The use of chirp is examined for spread spectrum communications. In a chirp communication system, each data bit is converted into one or more up or down sweeps of frequency, which spread the RF energy across a broad range of frequencies. Several different forms of chirp communication systems are considered, and a multiple-chirp coded system is proposed for overlay service. The mutual interference problem is examined in detail and a performance analysis undertaken for the case of a chirp data channel overlaid on a video channel
Compressive Sensing for Spread Spectrum Receivers
With the advent of ubiquitous computing there are two design parameters of
wireless communication devices that become very important power: efficiency and
production cost. Compressive sensing enables the receiver in such devices to
sample below the Shannon-Nyquist sampling rate, which may lead to a decrease in
the two design parameters. This paper investigates the use of Compressive
Sensing (CS) in a general Code Division Multiple Access (CDMA) receiver. We
show that when using spread spectrum codes in the signal domain, the CS
measurement matrix may be simplified. This measurement scheme, named
Compressive Spread Spectrum (CSS), allows for a simple, effective receiver
design. Furthermore, we numerically evaluate the proposed receiver in terms of
bit error rate under different signal to noise ratio conditions and compare it
with other receiver structures. These numerical experiments show that though
the bit error rate performance is degraded by the subsampling in the CS-enabled
receivers, this may be remedied by including quantization in the receiver
model. We also study the computational complexity of the proposed receiver
design under different sparsity and measurement ratios. Our work shows that it
is possible to subsample a CDMA signal using CSS and that in one example the
CSS receiver outperforms the classical receiver.Comment: 11 pages, 11 figures, 1 table, accepted for publication in IEEE
Transactions on Wireless Communication
Millimeter-wave Evolution for 5G Cellular Networks
Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular
network requires evolution to increase the system rate 1000 times higher than
the current systems in 10 years. Motivated by this common problem, there are
several studies to integrate mm-wave access into current cellular networks as
multi-band heterogeneous networks to exploit the ultra-wideband aspect of the
mm-wave band. The authors of this paper have proposed comprehensive
architecture of cellular networks with mm-wave access, where mm-wave small cell
basestations and a conventional macro basestation are connected to
Centralized-RAN (C-RAN) to effectively operate the system by enabling power
efficient seamless handover as well as centralized resource control including
dynamic cell structuring to match the limited coverage of mm-wave access with
high traffic user locations via user-plane/control-plane splitting. In this
paper, to prove the effectiveness of the proposed 5G cellular networks with
mm-wave access, system level simulation is conducted by introducing an expected
future traffic model, a measurement based mm-wave propagation model, and a
centralized cell association algorithm by exploiting the C-RAN architecture.
The numerical results show the effectiveness of the proposed network to realize
1000 times higher system rate than the current network in 10 years which is not
achieved by the small cells using commonly considered 3.5 GHz band.
Furthermore, the paper also gives latest status of mm-wave devices and
regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions
on Communications. (Mar. 2015
Reconfigurable Intelligent Surfaces for Wireless Communications: Principles, Challenges, and Opportunities
Recently there has been a flurry of research on the use of reconfigurable
intelligent surfaces (RIS) in wireless networks to create smart radio
environments. In a smart radio environment, surfaces are capable of
manipulating the propagation of incident electromagnetic waves in a
programmable manner to actively alter the channel realization, which turns the
wireless channel into a controllable system block that can be optimized to
improve overall system performance. In this article, we provide a tutorial
overview of reconfigurable intelligent surfaces (RIS) for wireless
communications. We describe the working principles of reconfigurable
intelligent surfaces (RIS) and elaborate on different candidate implementations
using metasurfaces and reflectarrays. We discuss the channel models suitable
for both implementations and examine the feasibility of obtaining accurate
channel estimates. Furthermore, we discuss the aspects that differentiate RIS
optimization from precoding for traditional MIMO arrays highlighting both the
arising challenges and the potential opportunities associated with this
emerging technology. Finally, we present numerical results to illustrate the
power of an RIS in shaping the key properties of a MIMO channel.Comment: to appear in the IEEE Transactions on Cognitive Communications and
Networking (TCCN
Real-Time Dispersion Code Multiple Access (DCMA) for High-Speed Wireless Communications
We model, demonstrate and characterize Dispersion Code Multiple Access (DCMA)
and hence show the applicability of this purely analog and real-time multiple
access scheme to high-speed wireless communications. We first mathematically
describe DCMA and show the appropriateness of Chebyshev dispersion coding in
this technology. We next provide an experimental proof-of-concept in a 2 X 2
DCMA system. Finally,we statistically characterize DCMA in terms of bandwidth,
dispersive group delay swing, system dimension and signal-to-noise ratio
- …