Constellation Mapping for Physical-Layer Network Coding with M-QAM Modulation

The denoise-and-forward (DNF) method of physical-layer network coding (PNC) is a promising approach for wireless relaying networks. In this paper, we consider DNF-based PNC with M-ary quadrature amplitude modulation (M-QAM) and propose a mapping scheme that maps the superposed M-QAM signal to coded symbols. The mapping scheme supports both square and non-square M-QAM modulations, with various original constellation mappings (e.g. binary-coded or Gray-coded). Subsequently, we evaluate the symbol error rate and bit error rate (BER) of M-QAM modulated PNC that uses the proposed mapping scheme. Afterwards, as an application, a rate adaptation scheme for the DNF method of PNC is proposed. Simulation results show that the rate-adaptive PNC is advantageous in various scenarios.Comment: Final version at IEEE GLOBECOM 201

Maximum Euclidean distance network coded modulation for asymmetric decode-and-forward two-way relaying

Network coding (NC) compresses two traffic flows with the aid of low-complexity algebraic operations, hence holds the potential of significantly improving both the efficiency of wireless two-way relaying, where each receiver is collocated with a transmitter and hence has prior knowledge of the message intended for the distant receiver. In this contribution, network coded modulation (NCM) is proposed for jointly performing NC and modulation. As in classic coded modulation, the Euclidean distance between the symbols is maximised, hence the symbol error probability is minimised. Specifically, the authors first propose set-partitioning-based NCM as an universal concept which can be combined with arbitrary constellations. Then the authors conceive practical phase-shift keying/quadrature amplitude modulation (PSK/QAM) NCM schemes, referred to as network coded PSK/QAM, based on modulo addition of the normalised phase/amplitude. To achieve a spatial diversity gain at a low complexity, a NC oriented maximum ratio combining scheme is proposed for combining the network coded signal and the original signal of the source. An adaptive NCM is also proposed to maximise the throughput while guaranteeing a target bit error probability (BEP). Both theoretical performance analysis and simulations demonstrate that the proposed NCM can achieve at least 3 dB signal-to-noise ratio gain and two times diversity gain

Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization

In this paper, probabilistic shaping is numerically and experimentally investigated for increasing the transmission reach of wavelength division multiplexed (WDM) optical communication system employing quadrature amplitude modulation (QAM). An optimized probability mass function (PMF) of the QAM symbols is first found from a modified Blahut-Arimoto algorithm for the optical channel. A turbo coded bit interleaved coded modulation system is then applied, which relies on many-to-one labeling to achieve the desired PMF, thereby achieving shaping gain. Pilot symbols at rate at most 2% are used for synchronization and equalization, making it possible to receive input constellations as large as 1024QAM. The system is evaluated experimentally on a 10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t. standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at 5.46 bits/symbol. It is shown that rate adaptation does not require changing of the modulation format. The performance of the proposed 1024QAM shaped system is validated on all 5 channels of the WDM signal for selected distances and rates. Finally, it was shown via EXIT charts and BER analysis that iterative demapping, while generally beneficial to the system, is not a requirement for achieving the shaping gain.Comment: 10 pages, 12 figures, Journal of Lightwave Technology, 201

Voronoi Constellations for Coherent Fiber-Optic Communication Systems

The increasing demand for higher data rates is driving the adoption of high-spectral-efficiency (SE) transmission in communication systems. The well-known 1.53 dB gap between Shannon\u27s capacity and the mutual information (MI) of uniform quadrature amplitude modulation (QAM) formats indicates the importance of power efficiency, particularly in high-SE transmission scenarios, such as fiber-optic communication systems and wireless backhaul links. Shaping techniques are the only way to close this gap, by adapting the uniform input distribution to the capacity-achieving distribution. The two categories of shaping are probabilistic shaping (PS) and geometric shaping (GS). Various methods have been proposed for performing PS and GS, each with distinct implementation complexity and performance characteristics. In general, the complexity of these methods grows dramatically with the SE and number of dimensions.Among different methods, multidimensional Voronoi constellations (VCs) provide a good trade-off between high shaping gains and low-complexity encoding/decoding algorithms due to their nice geometric structures. However, VCs with high shaping gains are usually very large and the huge cardinality makes system analysis and design cumbersome, which motives this thesis.In this thesis, we develop a set of methods to make VCs applicable to communication systems with a low complexity. The encoding and decoding, labeling, and coded modulation schemes of VCs are investigated. Various system performance metrics including uncoded/coded bit error rate, MI, and generalized mutual information (GMI) are studied and compared with QAM formats for both the additive white Gaussian noise channel and nonlinear fiber channels. We show that the proposed methods preserve high shaping gains of VCs, enabling significant improvements on system performance for high-SE transmission in both the additive white Gaussian noise channel and nonlinear fiber channel. In addition, we propose general algorithms for estimating the MI and GMI, and approximating the log-likelihood ratios in soft-decision forward error correction codes for very large constellations

Spectrally and Energy Efficient Wireless Communications: Signal and System Design, Mathematical Modelling and Optimisation

This thesis explores engineering studies and designs aiming to meeting the requirements of enhancing capacity and energy efficiency for next generation communication networks. Challenges of spectrum scarcity and energy constraints are addressed and new technologies are proposed, analytically investigated and examined. The thesis commences by reviewing studies on spectrally and energy-efficient techniques, with a special focus on non-orthogonal multicarrier modulation, particularly spectrally efficient frequency division multiplexing (SEFDM). Rigorous theoretical and mathematical modelling studies of SEFDM are presented. Moreover, to address the potential application of SEFDM under the 5th generation new radio (5G NR) heterogeneous numerologies, simulation-based studies of SEFDM coexisting with orthogonal frequency division multiplexing (OFDM) are conducted. New signal formats and corresponding transceiver structure are designed, using a Hilbert transform filter pair for shaping pulses. Detailed modelling and numerical investigations show that the proposed signal doubles spectral efficiency without performance degradation, with studies of two signal formats; uncoded narrow-band internet of things (NB-IoT) signals and unframed turbo coded multi-carrier signals. The thesis also considers using constellation shaping techniques and SEFDM for capacity enhancement in 5G system. Probabilistic shaping for SEFDM is proposed and modelled to show both transmission energy reduction and bandwidth saving with advantageous flexibility for data rate adaptation. Expanding on constellation shaping to improve performance further, a comparative study of multidimensional modulation techniques is carried out. A four-dimensional signal, with better noise immunity is investigated, for which metaheuristic optimisation algorithms are studied, developed, and conducted to optimise bit-to-symbol mapping. Finally, a specially designed machine learning technique for signal and system design in physical layer communications is proposed, utilising the application of autoencoder-based end-to-end learning. Multidimensional signal modulation with multidimensional constellation shaping is proposed and optimised by using machine learning techniques, demonstrating significant improvement in spectral and energy efficiencies

Single-Symbol ML Decodable Distributed STBCs for Partially-Coherent Cooperative Networks

Space-time block codes (STBCs) that are single-symbol decodable (SSD) in a co-located multiple antenna setting need not be SSD in a distributed cooperative communication setting. A relay network with N relays and a single source-destination pair is called a partially-coherent relay channel (PCRC) if the destination has perfect channel state information (CSI) of all the channels and the relays have only the phase information of the source-to-relay channels. In this paper, first, a new set of necessary and sufficient conditions for a STBC to be SSD for co-located multiple antenna communication is obtained. Then, this is extended to a set of necessary and sufficient conditions for a distributed STBC (DSTBC) to be SSD for a PCRC, by identifying the additional conditions. Using this, several SSD DSTBCs for PCRC are identified among the known classes of STBCs. It is proved that even if a SSD STBC for a co-located MIMO channel does not satisfy the additional conditions for the code to be SSD for a PCRC, single-symbol decoding of it in a PCRC gives full-diversity and only coding gain is lost. It is shown that when a DSTBC is SSD for a PCRC, then arbitrary coordinate interleaving of the in-phase and quadrature-phase components of the variables does not disturb its SSD property for PCRC. Finally, it is shown that the possibility of {\em channel phase compensation} operation at the relay nodes using partial CSI at the relays increases the possible rate of SSD DSTBCs from $\frac{2}{N}$ when the relays do not have CSI to 1/2, which is independent of N