Fixed chain-based wireless sensor network for intelligent transportation systems

Wireless Sensor Networks (WSNs) are distributed and interconnected wirelessly sensors that are used in a variety of fields of our daily life, such as the manufacturing, utility operations and traffic monitoring. Many WSN applications come with some technical weaknesses and issues, especially when they are used in Intelligent Transportation Systems (ITS). For ITS applications that use a fixed chain topology which contains road studs deployed at ground level, there are some challenges related to radio propagation, energy constraints and the Media Access Control (MAC) protocol. This thesis develops a ground level radio propagation model for communication between road studs, and energy efficiency metrics to manage the resources to overcome the energy constraints, as well as a MAC protocol compatible with chain topology and ground level communication. For the challenges of the physical layer, this thesis investigates the use of a WSN for communicating between road-based nodes. These nodes are situated at ground level, and two-way wireless communication is required between the nodes and from the nodes to a roadside control unit. Field measurements have been carried out to examine the propagation close to the ground to determine the maximum distance between road-based nodes as a function of the antenna height. The results show that for a frequency of 2.4 GHz, a range of up to 8m is achievable with 2mW equivalent isotropically radiated power (EIRP). An empirical near-ground level radio propagation model has been derived, and the predicted results from this model are shown to match closely to the measured results. Since wireless sensor networks have power constraints, green energy efficiency metrics have been proposed for low-power wireless sensors operating at ground level. A numerical analysis is carried out to investigate the utilisation of the green energy efficiency metrics for ground level communication in wireless sensor networks. The proposed metrics have been developed to calculate the optimal sensor deployment, antenna height and energy efficiency level for the near ground wireless sensor. As an application of the proposed metrics, the relationship between the energy efficiency and the spacing between the wireless sensor nodes has been studied. The results provide guidance for energy efficient deployment of near ground level wireless sensors. To manage the communication between large numbers of nodes deployed on a chain topology, this research presents a time division multiple access (TDMA) MAC protocol that is specifically designed for applications requiring periodic sensing of the sensor field. Numerical analysis has been conducted to investigate the optimum transmission scheduling based on the signal-to-interference-plus-noise-ratio (SINR) for ground level propagation model applied on wireless chain topology. The optimised transmission schedule considers the SINR value to enable simultaneous transmission from multiple nodes. The most significant advantages of this approach are reduced delay and improved Packet Received Ratio (PRR). Simulation is performed to evaluate the proposed protocol for intelligent transport system applications. The simulation results validate the MAC protocol for a fixed chain topology compared with similar protocols

Control-data separation architecture for cellular radio access networks: a survey and outlook

Conventional cellular systems are designed to ensure ubiquitous coverage with an always present wireless channel irrespective of the spatial and temporal demand of service. This approach raises several problems due to the tight coupling between network and data access points, as well as the paradigm shift towards data-oriented services, heterogeneous deployments and network densification. A logical separation between control and data planes is seen as a promising solution that could overcome these issues, by providing data services under the umbrella of a coverage layer. This article presents a holistic survey of existing literature on the control-data separation architecture (CDSA) for cellular radio access networks. As a starting point, we discuss the fundamentals, concepts, and general structure of the CDSA. Then, we point out limitations of the conventional architecture in futuristic deployment scenarios. In addition, we present and critically discuss the work that has been done to investigate potential benefits of the CDSA, as well as its technical challenges and enabling technologies. Finally, an overview of standardisation proposals related to this research vision is provided

Radio network management in cognitive LTE-Femtocell Systems

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London.There is a strong uptake of femtocell deployment as small cell application platforms in the upcoming LTE networks. In such two-tier networks of LTEfemtocell base stations, a large portion of the assigned spectrum is used sporadically leading to underutilisation of valuable frequency resources. Novel spectrum access techniques are necessary to solve these current spectrum inefficiency problems. Therefore, spectrum management solutions should have the features to improve spectrum access in both temporal and spatial manner. Cognitive Radio (CR) with the Dynamic Spectrum Access (DSA) is considered to be the key technology in this research in order to increase the spectrum efficiency. This is an effective solution to allow a group of Secondary Users (SUs) to share the radio spectrum initially allocated to the Primary User (PUs) at no interference. The core aim of this thesis is to develop new cognitive LTE-femtocell systems that offer a 4G vision, to facilitate the radio network management in order to increase the network capacity and further improve spectrum access probabilities. In this thesis, a new spectrum management model for cognitive radio networks is considered to enable a seamless integration of multi-access technology with existing networks. This involves the design of efficient resource allocation algorithms that are able to respond to the rapid changes in the dynamic wireless environment and primary users activities. Throughout this thesis a variety of network upgraded functions are developed using application simulation scenarios. Therefore, the proposed algorithms, mechanisms, methods, and system models are not restricted in the considered networks, but rather have a wider applicability to be used in other technologies. This thesis mainly investigates three aspects of research issues relating to the efficient management of cognitive networks: First, novel spectrum resource management modules are proposed to maximise the spectrum access by rapidly detecting the available transmission opportunities. Secondly, a developed pilot power controlling algorithm is introduced to minimise the power consumption by considering mobile position and application requirements. Also, there is investigation on the impact of deploying different numbers of femtocell base stations in LTE domain to identify the optimum cell size for future networks. Finally, a novel call admission control mechanism for mobility management is proposed to support seamless handover between LTE and femtocell domains. This is performed by assigning high speed mobile users to the LTE system to avoid unnecessary handovers. The proposed solutions were examined by simulation and numerical analysis to show the strength of cognitive femtocell deployment for the required applications. The results show that the new system design based on cognitive radio configuration enable an efficient resource management in terms of spectrum allocation, adaptive pilot power control, and mobile handover. The proposed framework and algorithms offer a novel spectrum management for self organised LTE-femtocell architecture. Eventually, this research shows that certain architectures fulfilling spectrum management requirements are implementable in practice and display good performance in dynamic wireless environments which recommends the consideration of CR systems in LTE and femtocell networks

Optimising lower layers of the protocol stack to improve communication performance in a wireless temperature sensor network

The function of wireless sensor networks is to monitor events or gather information and report the information to a sink node, a central location or a base station. It is a requirement that the information is transmitted through the network efficiently. Wireless communication is the main activity that consumes energy in wireless sensor networks through idle listening, overhearing, interference and collision. It becomes essential to limit energy usage while maintaining communication between the sensor nodes and the sink node as the nodes die after the battery has been exhausted. Thus, conserving energy in a wireless sensor network is of utmost importance. Numerous methods to decrease energy expenditure and extend the lifetime of the network have been proposed. Researchers have devised methods to efficiently utilise the limited energy available for wireless sensor networks by optimising the design parameters and protocols. Cross-layer optimisation is an approach that has been employed to improve wireless communication. The essence of cross-layer scheme is to optimise the exchange and control of data between two or more layers to improve efficiency. The number of transmissions is therefore a vital element in evaluating overall energy usage. In this dissertation, a Markov Chain model was employed to analyse the tuning of two layers of the protocol stack, namely the Physical Layer (PHY) and Media Access Control layer (MAC), to find possible energy gains. The study was conducted utilising the IEEE 802.11 channel, SensorMAC (SMAC) and Slotted-Aloha (S-Aloha) medium access protocols in a star topology Wireless Temperature Sensor Network (WTSN). The research explored the prospective energy gains that could be realised through optimizing the Forward Error Correction (FEC) rate. Different Reed Solomon codes were analysed to explore the effect of protocol tuning on energy efficiency, namely transmission power, modulation method, and channel access. The case where no FEC code was used and analysed as the control condition. A MATLAB simulation model was used to identify the statistics of collisions, overall packets transmitted, as well as the total number of slots used during the transmission phase. The bit error probability results computed analytically were utilised in the simulation model to measure the probability of successful transmitting data in the physical layer. The analytical values and the simulation results were compared to corroborate the correctness of the models. The results indicate that energy gains can be accomplished by the suggested layer tuning approach.Electrical and Mining EngineeringM. Tech. (Electrical Engineering

A survey of self organisation in future cellular networks

This article surveys the literature over the period of the last decade on the emerging field of self organisation as applied to wireless cellular communication networks. Self organisation has been extensively studied and applied in adhoc networks, wireless sensor networks and autonomic computer networks; however in the context of wireless cellular networks, this is the first attempt to put in perspective the various efforts in form of a tutorial/survey. We provide a comprehensive survey of the existing literature, projects and standards in self organising cellular networks. Additionally, we also aim to present a clear understanding of this active research area, identifying a clear taxonomy and guidelines for design of self organising mechanisms. We compare strength and weakness of existing solutions and highlight the key research areas for further development. This paper serves as a guide and a starting point for anyone willing to delve into research on self organisation in wireless cellular communication networks

Wireless Communication Networks for Gas Turbine Engine Testing

A new trend in the field of Aeronautical Engine Health Monitoring is the implementation of wireless sensor networks (WSNs) for data acquisition and condition monitoring to partially replace heavy and complex wiring harnesses, which limit the versatility of the monitoring process as well as creating practical deployment issues. Using wireless technologies instead of fixed wiring will fuel opportunities for reduced cabling, faster sensor and network deployment, increased data acquisition flexibility and reduced cable maintenance costs. However, embedding wireless technology into an aero engine (even in the ground testing application considered here) presents some very significant challenges, e.g. a harsh environment with a complex RF transmission environment, high sensor density and high data-rate. In this paper we discuss the results of the Wireless Data Acquisition in Gas Turbine Engine Testing (WIDAGATE) project, which aimed to design and simulate such a network to estimate network performance and de-risk the wireless techniques before the deployment

New Waves of IoT Technologies Research – Transcending Intelligence and Senses at the Edge to Create Multi Experience Environments

The next wave of Internet of Things (IoT) and Industrial Internet of Things (IIoT) brings new technological developments that incorporate radical advances in Artificial Intelligence (AI), edge computing processing, new sensing capabilities, more security protection and autonomous functions accelerating progress towards the ability for IoT systems to self-develop, self-maintain and self-optimise. The emergence of hyper autonomous IoT applications with enhanced sensing, distributed intelligence, edge processing and connectivity, combined with human augmentation, has the potential to power the transformation and optimisation of industrial sectors and to change the innovation landscape. This chapter is reviewing the most recent advances in the next wave of the IoT by looking not only at the technology enabling the IoT but also at the platforms and smart data aspects that will bring intelligence, sustainability, dependability, autonomy, and will support human-centric solutions.acceptedVersio