Demand response within the energy-for-water-nexus - A review. ESRI WP637, October 2019

A promising tool to achieve more flexibility within power systems is demand re-sponse (DR). End-users in many strands of industry have been subject to research up to now regarding the opportunities for implementing DR programmes. One sector that has received little attention from the literature so far, is wastewater treatment. However, case studies indicate that the potential for wastewater treatment plants to provide DR services might be significant. This review presents and categorises recent modelling approaches for industrial demand response as well as for the wastewater treatment plant operation. Furthermore, the main sources of flexibility from wastewater treatment plants are presented: a potential for variable electricity use in aeration, the time-shifting operation of pumps, the exploitation of built-in redundan-cy in the system and flexibility in the sludge processing. Although case studies con-note the potential for DR from individual WWTPs, no study acknowledges the en-dogeneity of energy prices which arises from a large-scale utilisation of DR. There-fore, an integrated energy systems approach is required to quantify system and market effects effectively

Thermo-economic assessment of a olive pomace gasifier for cogeneration applications

A thermo-economic analysis of a combined heat and power (CHP) plant fed by syngas produced through the gasification of dry olive pomace is presented. The plant is composed by a 800 kWtdowndraft gasifier, a gas clean-up system, a 200 kWemicroturbine (MGT) and a heat recovery system to cogenerate hot water. Surplus heat is used to dry olive pomace from 50% to 17% wb moisture content. The plant is modeled in ASPEN Plus. Real data from experimental tests are used to calibrate the gasifier model, while the technical specification and performance of the CHP plant are collected from commercial plants in operation and data from manufacturers. Mass and energy balances are reported throughout the paper. The thermodynamic simulation of the biomass gasifier coupled to the MGT, the thermal and electrical conversion efficiency and temperature of cogenerated heat available are also presented. A thermo-economic assessment is then proposed, to investigate the economic profitability of this small scale CHP plant in the Italian energy policy scenario and considering the subsidies available for renewable electricity in the form of feed-in tariffs. For this purpose, the case study of base load CHP plant operation and heat supplied to different typologies of energy end user is assumed. The results allow quantifying the most influencing economic and technical factors that affect the performance and profitability of such investment and the bottlenecks that should be faced to facilitate a broader implementation of such CHP schemes for on site generation

The safety case and the lessons learned for the reliability and maintainability case

This paper examine the safety case and the lessons learned for the reliability and maintainability case

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested

FRAM for systemic accident analysis: a matrix representation of functional resonance

Due to the inherent complexity of nowadays Air Traffic Management (ATM) system, standard methods looking at an event as a linear sequence of failures might become inappropriate. For this purpose, adopting a systemic perspective, the Functional Resonance Analysis Method (FRAM) originally developed by Hollnagel, helps identifying non-linear combinations of events and interrelationships. This paper aims to enhance the strength of FRAM-based accident analyses, discussing the Resilience Analysis Matrix (RAM), a user-friendly tool that supports the analyst during the analysis, in order to reduce the complexity of representation of FRAM. The RAM offers a two dimensional representation which highlights systematically connections among couplings, and thus even highly connected group of couplings. As an illustrative case study, this paper develops a systemic accident analysis for the runway incursion happened in February 1991 at LAX airport, involving SkyWest Flight 5569 and USAir Flight 1493. FRAM confirms itself a powerful method to characterize the variability of the operational scenario, identifying the dynamic couplings with a critical role during the event and helping discussing the systemic effects of variability at different level of analysis

Hortibot: Feasibility study of a plant nursing robot performing weeding operations – part IV

Based on the development of a robotic tool carrier (Hortibot) equipped with weeding tools, a feasibility study was carried out to evaluate the viability of this innovative technology. The feasibility was demonstrated through a targeted evaluation adapted to the obtainable knowledge on the system performance in horticulture. A usage scenario was designed to set the implementation of the robotic system in a row crop of seeded bulb onions considering operational and functional constraints in organic crop, production. This usage scenario together with the technical specifications of the implemented system provided the basis for the feasibility analysis, including a comparison with a conventional weeding system. Preliminary results show that the automation of the weeding tasks within a row crop has the potential of significantly reducing the costs and still fulfill the operational requirements set forth. The potential benefits in terms of operational capabilities and economic viability have been quantified. Profitability gains ranging from 20 to 50% are achievable through targeted applications. In general, the analyses demonstrate the operational and economic feasibility of using small automated vehicles and targeted tools in specialized production settings

Modeling and supervisory control design for a combined cycle power plant

The traditional control strategy based on PID controllers may be unsatisfactory when dealing with processes with large time delay and constraints. This paper presents a supervisory model based constrained predictive controller (MPC) for a combined cycle power plant (CCPP). First, a non-linear dynamic model of CCPP using the laws of physics was proposed. Then, the supervisory control using the linear constrained MPC method was designed to tune the performance of the PID controllers by including output constraints and manipulating the set points. This scheme showed excellent tracking and disturbance rejection results and improved performance compared with a stand-alone PID controller’s scheme

Aeration and hydrodynamics in submerged membrane bioreactors

Membrane bioreactor (MBR) is already a well-developed wastewater treatment process for both municipal and industrial applications. Nonetheless, membrane fouling remains a significant problem for its wider development. In the case of submerged membrane bioreactors (SMBRs), one of the most efficient strategies to limit fouling is the use of a gas/liquid two-phase flow to enhance the mass transfer. However, the effect of aeration still remains incompletely understood. The complexity of flows and of the nature of activated sludge makes a theoretical approach difficult. Aeration is the source of a large part of the operating costs in most industrial scale plants and its optimization is a necessity to make the process really efficient. This paper first deals with hydrodynamics in MBRs, then it reviews the parameters of aeration and their impact on filtration performance. Finally, the effects of aeration mechanisms on biological media are described