1,694 research outputs found
Respiratory Motion Compensation in Coronary Magnetic Resonance Angiography: Analysis and Optimization of Self-Navigation
Coronary Magnetic Resonance Imaging requires prolonged acquisition times; for this reason, respiratory movements of the heart have a great impact on the final image quality. The aim of this thesis was to provide possible optimization of the "self-navigation" approach to compensate this type of motion. Two developed methods were tested in 11 volunteer, thus providing statistically significant results. The purposed solutions provided optimal image quality in individal cases
Automated Cardiac Resting Phase Detection Targeted on the Right Coronary Artery
Static cardiac imaging such as late gadolinium enhancement, mapping, or 3-D
coronary angiography require prior information, e.g., the phase during a
cardiac cycle with least motion, called resting phase (RP). The purpose of this
work is to propose a fully automated framework that allows the detection of the
right coronary artery (RCA) RP within CINE series. The proposed prototype
system consists of three main steps. First, the localization of the regions of
interest (ROI) is performed. Second, the cropped ROI series are taken for
tracking motions over all time points. Third, the output motion values are used
to classify RPs. In this work, we focused on the detection of the area with the
outer edge of the cross-section of the RCA as our target. The proposed
framework was evaluated on 102 clinically acquired dataset at 1.5T and 3T. The
automatically classified RPs were compared with the reference RPs annotated
manually by a expert for testing the robustness and feasibility of the
framework. The predicted RCA RPs showed high agreement with the experts
annotated RPs with 92.7% accuracy, 90.5% sensitivity and 95.0% specificity for
the unseen study dataset. The mean absolute difference of the start and end RP
was 13.6 18.6 ms for the validation study dataset (n=102). In this work,
automated RP detection has been introduced by the proposed framework and
demonstrated feasibility, robustness, and applicability for static imaging
acquisitions.Comment: Accepted for publication at the Journal of Machine Learning for
Biomedical Imaging (MELBA) https://melba-journal.org/2023:00
Shearlet-based compressed sensing for fast 3D cardiac MR imaging using iterative reweighting
High-resolution three-dimensional (3D) cardiovascular magnetic resonance
(CMR) is a valuable medical imaging technique, but its widespread application
in clinical practice is hampered by long acquisition times. Here we present a
novel compressed sensing (CS) reconstruction approach using shearlets as a
sparsifying transform allowing for fast 3D CMR (3DShearCS). Shearlets are
mathematically optimal for a simplified model of natural images and have been
proven to be more efficient than classical systems such as wavelets. Data is
acquired with a 3D Radial Phase Encoding (RPE) trajectory and an iterative
reweighting scheme is used during image reconstruction to ensure fast
convergence and high image quality. In our in-vivo cardiac MRI experiments we
show that the proposed method 3DShearCS has lower relative errors and higher
structural similarity compared to the other reconstruction techniques
especially for high undersampling factors, i.e. short scan times. In this
paper, we further show that 3DShearCS provides improved depiction of cardiac
anatomy (measured by assessing the sharpness of coronary arteries) and two
clinical experts qualitatively analyzed the image quality
Dual-source computed tomography coronary artery imaging in children
Computed tomography (CT) has a well-established diagnostic role in the assessment of coronary arteries in adults. However, its application in a pediatric setting is still limited and often impaired by several technical issues, such as high heart rates, poor patient cooperation, and radiation dose exposure. Nonetheless, CT is becoming crucial in the noninvasive approach of children affected by coronary abnormalities and congenital heart disease. In some circumstances, CT might be preferred to other noninvasive techniques such as echocardiography and MRI for its lack of acoustic window influence, shorter acquisition time, and high spatial resolution. The introduction of dual-source CT has expanded the role of CT in the evaluation of pediatric cardiovascular anatomy and pathology. Furthermore, technical advances in the optimization of low-dose protocols represent an attractive innovation. Dual-source CT can play a key role in several clinical settings in children, namely in the evaluation of children with suspected congenital coronary artery anomalies, both isolated and in association with congenital heart disease. Moreover, it can be used to assess acquired coronary artery abnormalities, as in children with Kawasaki disease and after surgical manipulation, especially in case of transposition of the great arteries treated with arterial switch operation and in case of coronary re-implantation
Augmented Image-Guidance for Transcatheter Aortic Valve Implantation
The introduction of transcatheter aortic valve implantation (TAVI), an innovative stent-based technique for delivery of a bioprosthetic valve, has resulted in a paradigm shift in treatment options for elderly patients with aortic stenosis. While there have been major advancements in valve design and access routes, TAVI still relies largely on single-plane fluoroscopy for intraoperative navigation and guidance, which provides only gross imaging of anatomical structures. Inadequate imaging leading to suboptimal valve positioning contributes to many of the early complications experienced by TAVI patients, including valve embolism, coronary ostia obstruction, paravalvular leak, heart block, and secondary nephrotoxicity from contrast use.
A potential method of providing improved image-guidance for TAVI is to combine the information derived from intra-operative fluoroscopy and TEE with pre-operative CT data. This would allow the 3D anatomy of the aortic root to be visualized along with real-time information about valve and prosthesis motion. The combined information can be visualized as a `merged\u27 image where the different imaging modalities are overlaid upon each other, or as an `augmented\u27 image, where the location of key target features identified on one image are displayed on a different imaging modality.
This research develops image registration techniques to bring fluoroscopy, TEE, and CT models into a common coordinate frame with an image processing workflow that is compatible with the TAVI procedure. The techniques are designed to be fast enough to allow for real-time image fusion and visualization during the procedure, with an intra-procedural set-up requiring only a few minutes. TEE to fluoroscopy registration was achieved using a single-perspective TEE probe pose estimation technique. The alignment of CT and TEE images was achieved using custom-designed algorithms to extract aortic root contours from XPlane TEE images, and matching the shape of these contours to a CT-derived surface model. Registration accuracy was assessed on porcine and human images by identifying targets (such as guidewires or coronary ostia) on the different imaging modalities and measuring the correspondence of these targets after registration.
The merged images demonstrated good visual alignment of aortic root structures, and quantitative assessment measured an accuracy of less than 1.5mm error for TEE-fluoroscopy registration and less than 6mm error for CT-TEE registration. These results suggest that the image processing techniques presented have potential for development into a clinical tool to guide TAVI. Such a tool could potentially reduce TAVI complications, reducing morbidity and mortality and allowing for a safer procedure
Improved 3D MR Image Acquisition and Processing in Congenital Heart Disease
Congenital heart disease (CHD) is the most common type of birth defect, affecting about 1% of the population. MRI is an essential tool in the assessment of CHD, including diagnosis, intervention planning and follow-up. Three-dimensional MRI can provide particularly rich visualization and information. However, it is often complicated by long scan times, cardiorespiratory motion, injection of contrast agents, and complex and time-consuming postprocessing. This thesis comprises four pieces of work that attempt to respond to some of these challenges.
The first piece of work aims to enable fast acquisition of 3D time-resolved cardiac imaging during free breathing. Rapid imaging was achieved using an efficient spiral sequence and a sparse parallel imaging reconstruction. The feasibility of this approach was demonstrated on a population of 10 patients with CHD, and areas of improvement were identified.
The second piece of work is an integrated software tool designed to simplify and accelerate the development of machine learning (ML) applications in MRI research. It also exploits the strengths of recently developed ML libraries for efficient MR image reconstruction and processing.
The third piece of work aims to reduce contrast dose in contrast-enhanced MR angiography (MRA). This would reduce risks and costs associated with contrast agents. A deep learning-based contrast enhancement technique was developed and shown to improve image quality in real low-dose MRA in a population of 40 children and adults with CHD.
The fourth and final piece of work aims to simplify the creation of computational models for hemodynamic assessment of the great arteries. A deep learning technique for 3D segmentation of the aorta and the pulmonary arteries was developed and shown to enable accurate calculation of clinically relevant biomarkers in a population of 10 patients with CHD
- …