Experimental investigation into novel methods of reliable and secure on-body communications with low system overheads

Until recently the concept of wearable biosensors for purposes of medical monitoring was restricted to wired sensor applications. Recent advances in electronics and wireless communications have made the possibility of removing the wire from sensor applications a possibility. These advances have led to the development of small scale, wearable, sensing and communication platforms that can be placed on the human body creating the foundation for a Body Sensor Network (BSN). Body Sensor Networks aim to remove the restrictions that traditional wired sensors impose. The anticipation is that BSNs will permit the monitoring of physiological signals in any environment without limitation, giving Physicians the ability to monitor patients more closely and in environments that they cannot monitor today. Even with the recent advancements of electronics and wireless communications there are still many unanswered questions for practical solutions of BSNs that prevent BSNs from replacing traditional wired systems altogether. There is a great need for research into BSN architectures to set the standard for wireless sensor monitoring. In this work a development platform has been created for the investigation into the design and implementation of practical BSN solutions. The platform is used to compare BSN architectures and provide quantifiable results. From this work BSN architecture components that provide optimizations in system performance, energy, network lifetime and security are recommended. In Chapter 3 BSN network architectures employing the use of relaying of creeping waves is investigated. The investigation includes experimental analysis of various test environments. Experimentation demonstrates that the relaying of creeping waves offers considerable performance gains when compared to non-relay networks. For example, relaying is shown to increase network-lifetime by a factor of 13, decrease energy-per-bit requirements by 13 dB and provide the ability for the network to compensate for considerably wider fade margins. In Chapter 4 utilizing the randomness of the wireless channel for securing on-body communications with low overheads is considered. A low-complexity algorithm for establishing symmetric encryption keys is presented and validated. The algorithm relies on readily available RSSI measurements obtained from existing packets being sent and received in the network. The generated bit sequences from the algorithm are evaluated for matching between two communicating parties and mismatching with a malicious eavesdropper. It is shown that the algorithm produces long sequences of highly random bits that are perfectly matched between legitimate parties and highly mismatched with the eavesdropper

SIMPLE: Stable Increased-throughput Multi-hop Protocol for Link Efficiency in Wireless Body Area Networks

In this work, we propose a reliable, power efficient and high throughput routing protocol for Wireless Body Area Networks (WBANs). We use multi-hop topology to achieve minimum energy consumption and longer network lifetime. We propose a cost function to select parent node or forwarder. Proposed cost function selects a parent node which has high residual energy and minimum distance to sink. Residual energy parameter balances the energy consumption among the sensor nodes while distance parameter ensures successful packet delivery to sink. Simulation results show that our proposed protocol maximize the network stability period and nodes stay alive for longer period. Longer stability period contributes high packet delivery to sink which is major interest for continuous patient monitoring.Comment: IEEE 8th International Conference on Broadband and Wireless Computing, Communication and Applications (BWCCA'13), Compiegne, Franc

Low power body sensor network design based on relaying of creeping waves in the unlicensed 2.4GHz band

Body Sensor Networks are an important enabling technology for future applications in remote medical diagnostics. Practical deployments of these systems have only recently edged closer to viability, due in part to advances in low power electronics and System-On-Chip devices. Wireless communication between these sensors remains a daunting challenge, and designers typically leverage existing industrial standards designed for applications with significantly different communications requirements. This Thesis proposes a wireless communications platform designed specifically for body mounted sensors, exploiting a phenomenon in electromagnetic wave propagation known as a creeping wave. Relaying of these waves leads to a highly reliable body sensor network with very low power consumption in the unlicensed 2.4 GHz band. A link budget is derived based on the creeping wave component of the transmitted signal, which is then used to design a spread spectrum wireless transceiver. Significant attention is given to interference mitigation, allowing the system to co-exist with other wireless devices on the internationally unlicensed band. Fading statistics from both anechoic and high multipath scenarios are used to define a channel model for the system. The link budget and channel model lead to the proposed use of relaying as a power savings technique, and this concept is a core feature of the design. This technique is shown to provide reliable total body coverage with very low transmission power, a result that has eluded body sensor networks to date. Various relaying topologies are discussed, and robust operation for highly mobile users is achieved via sensor handoffs, a concept that resembles a similar solution in cellular networks. The design extends to define a polling protocol and packet structures. Objective performance metrics are defined, and the proposed system is evaluated in line with these metrics. The power reduction of the suggested approach is analyzed by comparing the network lifetime and energy-per-bit to those of a reference system offering the same quality of service without relaying. The analysis results in generic closed form expressions of significant gains. The improvement in network lifetime increases with the number of sensors and settles at approximately 8x104, 7x106, 7x107 and 3x108 for 2,4,6 and 8 relaying nodes respectively. The energy-per-bit is shown to decrease by 2, 116, 828 and 2567 for 2, 4, 6 and 8 relay nodes respectively

Global Routing Protocols for Wireless Body Area Networks

This work primarily consists of two parts. The first part deals with a wireless body area network with battery operated nodes. Global routing protocols are considered. The Dijkstra`s algorithm was modified using a novel link cost function in order to perform energy balancing across the network. The proposed protocol makes optimal use of the network energy and increases the network lifetime. Hardware experiments involving multiple nodes and an access point are performed to gather wireless channel information. Performance of two different types of network architectures is evaluated viz. on-body access point and off-body access point architectures. Results show up to 40% increase in average network lifetime with modest average increase of 0.4 dB in energy per bit. Proposed protocol lessens the need to recharge batteries frequently and as all the nodes deplete their energy source at the same time due to energy balancing, recharging can be done for all the batteries at the same time instead of recharging them one at a time. Network connectivity is evaluated using outage as a metric. Results show the cut-off effect which signifies the minimum amount of transmission power required to achieve reliable communication. The advantages of an off-body access point are demonstrated. The second part presents a global routing protocol based on Dijkstra`s algorithm for wireless body area networks with energy harvesting constraints. The protocol dynamically modifies routing trees based on available energy accumulated through energy harvesting. Various harvesting methods are considered. The results show that low data-rate applications are achievable using existing energy harvesting techniques while high data-rate applications call for advancements in these methods

Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

AN ENHANCED-SIMPLE PROTOCOL FOR WIRELESS BODY AREA NETWORKS

A Wireless Body Sensor Network (WBSN) characterizes an independent system that is used for the purpose of monitoring the daily routine activities of an individual. It comprises of smart sensor nodes which do not have any kind of adverse effect on the daily routine activities and are quite effective in the detection of chronic health problems such as diabetes, heart attack, asthma etc., and to caution the person suffering from diseases in the case of an emergency conditions. In this work, a wireless body area network routing protocol is designed where distance of the sink from various nodes and residual energy of the nodes decides the forwarding nodes to maximize the throughput. In this work, all the sensors on the body will transfer data to sink node and sink node will transmit data to base station or to the server. The simulation results will be evaluated in terms of remaining energy, throughput and number of dead nodes. The obtained results are also ompared with recent published protocols and it has been found that in comparison to SIMPLE and iM-SIMPLE, the proposed protocol E2 (nomenclature used in the paper) has throughput higher than 12.46% and 6.7% respectively

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Bounds on RF cooperative localization for video capsule endoscopy

Wireless video capsule endoscopy has been in use for over a decade and it uses radio frequency (RF) signals to transmit approximately fifty five thousands clear pictures of inside the GI tract to the body-mounted sensor array. However, physician has no clue on the exact location of the capsule inside the GI tract to associate it with the pictures showing abnormalities such as bleeding or tumors. It is desirable to use the same RF signal for localization of the VCE as it passes through the human GI tract. In this thesis, we address the accuracy limits of RF localization techniques for VCE localization applications. We present an assessment of the accuracy of cooperative localization of VCE using radio frequency (RF) signals with particular emphasis on localization inside the small intestine. We derive the Cramer-Rao Lower Bound (CRLB) for cooperative location estimators using the received signal strength(RSS) or the time of arrival (TOA) of the RF signal. Our derivations are based on a three-dimension human body model, an existing model for RSS propagation from implant organs to body surface and a TOA ranging error model for the effects of non-homogenity of the human body on TOA of the RF signals. Using models for RSS and TOA errors, we first calculate the 3D CRLB bounds for cooperative localization of the VCE in three major digestive organs in the path of GI tract: the stomach, the small intestine and the large intestine. Then we analyze the performance of localization techniques on a typical path inside the small intestine. Our analysis includes the effects of number of external sensors, the external sensor array topology, number of VCE in cooperation and the random variations in transmit power from the capsule

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

From Radio Channel Modeling to a System Level Perspective in Body-Centric Communications

Body-centric communications are emerging as a new paradigm in the panorama of personal communications. Being concerned with human behaviour, they are suitable for a wide variety of applications. The advances in the miniaturization of portable devices to be placed on or around the body, foster the diffusion of these systems, where the human body is the key element defining communication characteristics. This thesis investigates the human impact on body-centric communications under its distinctive aspects. First of all, the unique propagation environment defined by the body is described through a scenario-based channel modeling approach, according to the communication scenario considered, i.e., on- or on- to off-body. The novelty introduced pertains to the description of radio channel features accounting for multiple sources of variability at the same time. Secondly, the importance of a proper channel characterisation is shown integrating the on-body channel model in a system level simulator, allowing a more realistic comparison of different Physical and Medium Access Control layer solutions. Finally, the structure of a comprehensive simulation framework for system performance evaluation is proposed. It aims at merging in one tool, mobility and social features typical of the human being, together with the propagation aspects, in a scenario where multiple users interact sharing space and resources