2,475 research outputs found
A scheme for cancelling intercarrier interference using conjugate transmission in multicarrier communication systems
To mitigate intercarrier interference (ICI), a two-path algorithm is developed for multicarrier communication systems, including orthogonal frequency division multiplexing (OFDM) systems. The first path employs the regular OFDM algorithm. The second path uses the conjugate transmission of the first path. The combination of both paths forms a conjugate ICI cancellation scheme at the receiver. This conjugate cancellation (CC) scheme provides (1) a high signal to interference power ratio (SIR) in the presence of small frequency offsets (50 dB and 33 dB higher than that of the regular OFDM and linear self-cancellation algorithms [1], [2], respectively, at ΔfT = 0.1% of subcarrier frequency spacing); (2) better bit error rate (BER) performance in both additive white Gaussian noise (AWGN) and fading channels; (3) backward compatibility with the existing OFDM system; (4) no channel equalization is needed for reducing ICI, a simple low cost receiver without increasing system complexity. Although the two-path transmission reduces bandwidth efficiency, the disadvantage can be balanced by increasing signal alphabet sizes
Adaptive spatial mode of space-time and spacefrequency OFDM system over fading channels
In this paper we present a 2 transmit 1 receive (1 Tx : 1 Rx) adaptive spatial
mode (ASM) of space-time (ST) and space-frequency (SF) orthogonal frequency division
multiplexing (OFDM). At low signal to noise ratio (SNR) we employ ST-OFDM and switch
to SF-OFDM at a certain SNR threshold. We determine this threshold from the intersection
of individual performance curves. Results show a gain of 9 dB (at a bit error rate of 10-3) is
achieved by employing adaptive spatial mode compared to a fixed ST-OFDM, almost 6 dB
to fixed SF-OFDM, 4 dB to Coded ST-OFDM and 2 dB to a fixed coded SF-OFDM, at a
delay spread of 700 ns
A survey on fiber nonlinearity compensation for 400 Gbps and beyond optical communication systems
Optical communication systems represent the backbone of modern communication
networks. Since their deployment, different fiber technologies have been used
to deal with optical fiber impairments such as dispersion-shifted fibers and
dispersion-compensation fibers. In recent years, thanks to the introduction of
coherent detection based systems, fiber impairments can be mitigated using
digital signal processing (DSP) algorithms. Coherent systems are used in the
current 100 Gbps wavelength-division multiplexing (WDM) standard technology.
They allow the increase of spectral efficiency by using multi-level modulation
formats, and are combined with DSP techniques to combat the linear fiber
distortions. In addition to linear impairments, the next generation 400 Gbps/1
Tbps WDM systems are also more affected by the fiber nonlinearity due to the
Kerr effect. At high input power, the fiber nonlinear effects become more
important and their compensation is required to improve the transmission
performance. Several approaches have been proposed to deal with the fiber
nonlinearity. In this paper, after a brief description of the Kerr-induced
nonlinear effects, a survey on the fiber nonlinearity compensation (NLC)
techniques is provided. We focus on the well-known NLC techniques and discuss
their performance, as well as their implementation and complexity. An extension
of the inter-subcarrier nonlinear interference canceler approach is also
proposed. A performance evaluation of the well-known NLC techniques and the
proposed approach is provided in the context of Nyquist and super-Nyquist
superchannel systems.Comment: Accepted in the IEEE Communications Surveys and Tutorial
Space-Time Trellis and Space-Time Block Coding Versus Adaptive Modulation and Coding Aided OFDM for Wideband Channels
Abstract—The achievable performance of channel coded spacetime trellis (STT) codes and space-time block (STB) codes transmitted over wideband channels is studied in the context of schemes having an effective throughput of 2 bits/symbol (BPS) and 3 BPS. At high implementational complexities, the best performance was typically provided by Alamouti’s unity-rate G2 code in both the 2-BPS and 3-BPS scenarios. However, if a low complexity implementation is sought, the 3-BPS 8PSK space-time trellis code outperfoms the G2 code. The G2 space-time block code is also combined with symbol-by-symbol adaptive orthogonal frequency division multiplex (AOFDM) modems and turbo convolutional channel codecs for enhancing the system’s performance. It was concluded that upon exploiting the diversity effect of the G2 space-time block code, the channel-induced fading effects are mitigated, and therefore, the benefits of adaptive modulation erode. In other words, once the time- and frequency-domain fades of the wideband channel have been counteracted by the diversity-aided G2 code, the benefits of adaptive modulation erode, and hence, it is sufficient to employ fixed-mode modems. Therefore, the low-complexity approach of mitigating the effects of fading can be viewed as employing a single-transmitter, single-receiver-based AOFDM modem. By contrast, it is sufficient to employ fixed-mode OFDM modems when the added complexity of a two-transmitter G2 scheme is affordable
Data Detection and Code Channel Allocation for Frequency-Domain Spread ACO-OFDM Systems Over Indoor Diffuse Wireless Channels
Future optical wireless communication systems promise to provide high-speed data transmission in indoor diffuse environments. This paper considers frequency-domain spread asymmetrically clipped optical orthogonal frequency-division multiplexing (ACOOFDM) systems in indoor diffuse channels and aims to develop efficient data detection and code channel allocation schemes. By exploiting the frequency-domain spread concept, a linear multi-code detection scheme is proposed to maximize the signal to interference plus noise ratio (SINR) at the receiver. The achieved SINR and bit error ratio (BER) performance are analyzed. A computationally efficient code channel allocation algorithm is proposed to improve the BER performance of the frequency-domain spread ACO-OFDM system.
Numerical results show that the frequency-domain spread ACO-OFDM system outperforms conventional ACO-OFDM systems in indoor diffuse channels. Moreover, the proposed linear multi-code detection and code channel allocation algorithm can improve the performance of optical peak-to-average power ratio (PAPR
Flexible Multi-Group Single-Carrier Modulation: Optimal Subcarrier Grouping and Rate Maximization
Orthogonal frequency division multiplexing (OFDM) and single-carrier
frequency domain equalization (SC-FDE) are two commonly adopted modulation
schemes for frequency-selective channels. Compared to SC-FDE, OFDM generally
achieves higher data rate, but at the cost of higher transmit signal
peak-to-average power ratio (PAPR) that leads to lower power amplifier
efficiency. This paper proposes a new modulation scheme, called flexible
multi-group single-carrier (FMG-SC), which encapsulates both OFDM and SC-FDE as
special cases, thus achieving more flexible rate-PAPR trade-offs between them.
Specifically, a set of frequency subcarriers are flexibly divided into
orthogonal groups based on their channel gains, and SC-FDE is applied over each
of the groups to send different data streams in parallel. We aim to maximize
the achievable sum-rate of all groups by optimizing the subcarrier-group
mapping. We propose two low-complexity subcarrier grouping methods and show via
simulation that they perform very close to the optimal grouping by exhaustive
search. Simulation results also show the effectiveness of the proposed FMG-SC
modulation scheme with optimized subcarrier grouping in improving the rate-PAPR
trade-off over conventional OFDM and SC-FDE.Comment: Submitted for possible conference publicatio
- …