Deep brain drug-delivery control using vagus nerve communications

Vagus nerve stimulation (VNS) uses electrical impulses applied at the neck in order to mitigate the effects of, for example, epileptic seizures. We propose using VNS to provide data pulses to communicate with a drug-delivery system embedded near the brainstem. We model the generation of a vagus nerve compound action potential (CAP), calculating the signal attenuation and the resulting transmission range. The metabolic cost of CAP transmission in terms of the use of adenosine triphosphate (ATP) is also calculated. The channel capacity for on-off keying (OOK) is computed from the CAP characteristics, the neural refractory period and the level of background neural noise. The resulting low bit-rate, unidirectional asynchronous transmission system is analysed for the use of different methods of forward error correction (FEC) to improve bit-error rate (BER). We show a proposed data packet structure that could deliver instructions to an embedded drug-delivery system with multiple addressable drug reservoirs. We also analyse the scope for powering the drug-delivery system with energy harvested from cerebrospinal glucose

System Integration - A Major Step toward Lab on a Chip

Microfluidics holds great promise to revolutionize various areas of biological engineering, such as single cell analysis, environmental monitoring, regenerative medicine, and point-of-care diagnostics. Despite the fact that intensive efforts have been devoted into the field in the past decades, microfluidics has not yet been adopted widely. It is increasingly realized that an effective system integration strategy that is low cost and broadly applicable to various biological engineering situations is required to fully realize the potential of microfluidics. In this article, we review several promising system integration approaches for microfluidics and discuss their advantages, limitations, and applications. Future advancements of these microfluidic strategies will lead toward translational lab-on-a-chip systems for a wide spectrum of biological engineering applications

Capacity Analysis of a Peripheral Nerve Using Modulated Compound Action Potential Pulses

Artificial neural stimulation of a peripheral nerve can create an in-body data communications channel. We propose the stimulation of a peripheral nerve using energy-harvesting arrays of nanodevices, embedded in biocompatible tissue patches. The resulting extracellular compound action potential (CAP) pulse can provide a data bit-stream for communicating with an embedded receiver. Our objective is to determine the maximum achievable transmission range of a CAP along a nerve and the maximum sustainable bit rate. We model the generation of a CAP and then compute the reduction in amplitude and the spreading of the pulse with propagation distance. The channel capacity is calculated for ON-OFF keying (OOK) and digital pulse interval modulation. We show that the transmission range depends on the number and diameters of the activated neurons contributing to the CAP amplitude and width. Our modulation analysis demonstrates the effects of attenuation, background noise, the neural refractory period, and pulse broadening on the achievable bit rate. We show how a maximum OOK bit rate of 200 bit/s can be sustained over transmission distances greater than 100 mm. The proposed approach provides a low bit rate, unidirectional asynchronous transmission system that could, for example, deliver simple instructions to an embedded drug-delivery system

Miniaturized antenna and transponder based wireless sensors for internet of things in healthcare

Future medical and healthcare systems will be largely improved by the wide-spreading of internet of things (IoTs). One of the crucial challenges of IoTs for healthcare is at the wireless sensors. Miniaturization of sensor node profile, minimizing power consumption as well as lowering down design/production cost of antenna, RF circuits and sensor modules have become the key issues for realizing more exciting applications in medical and healthcare fields that never seemed to be possible before. In this dissertation work, we first focus on electrically small antenna (ESA) design and fabrication for medical telemetry. A comprehensive analysis of the radiation properties of a novel electrically small folded ellipsoidal ESA is presented, showing its ability to self-resonate and impedance match without external components. It will benefit various size-restricted applications especially with wireless medical implants. The second focus is on healthcare sensors using ESA as the sensing agent, which saves the power and cost by eliminating the need of extra sensing modules. Specifically, miniaturized helix ESAs are integrated with drug reservoirs to function as wireless transponder sensors for real-time drug dosage monitoring. We also introduce a system level innovation of a passive wireless harmonic transponder/harmonic sniffer/frequency hopped interrogator based sensing system. The μL- liquid level resolution and absolute-accuracy passive sensing is demonstrated in the presence of strong direct coupling, background scatters, distance variance as well as near-filed human body movement interference. Furthermore, we investigate how modern ubiquitous wireless sensor networks could take advantage of sensitive nanostructure materials for enhanced performance. Here we propose a new paradigm of chemically-gated mixed modulation on a single homogeneous graphene device in which the chemical exposure directly modulates an electrical carrier signal. To make the device ubiquitously reusable, a method of precisely tuning the charge neutrality point (Vcnp) is introduced by electrochemical calibration with gate voltage pulse sequence. Such chemically gated graphene modulator can be potentially used in a harmonic transponder as a passive ubiquitous sensor node for chemical and bio sensing applications. Overall the research work presented in the dissertation will help enable cost and power-efficient wireless sensor networks in future healthcare IoTs.Electrical and Computer Engineerin

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

Advanced MEMS Microprobes for Neural Stimulation and Recording

The in-vivo observation of the neural activities generated by a large number of closely located neurons is believed to be crucial for understanding the nervous system. Moreover, the functional electrical stimulation of the central nervous system is an effective method to restore physiological functions such as limb control, sound sensation, and light perception. The Deep Brain Stimulation (DBS) is being successfully used in the treatment of tremor and rigidity associated with advanced Parkinson's disease. Cochlear implants have also been employed as an effective treatment for sensorineural deafness by means of delivering the electrical stimulation directly to the auditory nerve. The most significant contribution of this PhD study is the development of next-generation microprobes for the simultaneous stimulation and recording of the cortex and deep brain structures. For intracortical applications, millimetre length multisite microprobes that are rigid enough to penetrate into the cortex while integrated with flexible interconnection cables are demanded. In chronic applications, the flexibility of the cable minimizes the tissue damage caused by the relative micro-motion between the brain and the microprobe. Although hybrid approaches have been reported to construct such neural microprobes, these devices are brittle and may impose severe complications if they break inside the tissue. In this project, MEMS fabrication processes were employed to produce non-breakable intracortical microprobes with an improved structural design. These 32 channel devices are integrated with flexible interconnection cables and provide enough mechanical strength for penetration into the tissue. Polyimide-based flexible implants were successfully fabricated and locally reinforced at the tip with embedded 15 µm-thick gold micro-needles. In DBS applications, centimetre long microprobes capable of stimulating and recording the neural activity are required. The currently available DBS probes, manufactured by Medtronic, provide only four cylindrical shaped electrode sites, each 1.5 mm in height and 1.27 mm in diameter. Although suitable for the stimulation of a large brain volume, to measure the activity of a single neuron but to avoid measuring the average response of adjacent cells, recording sites with dimensions in the range of 10 - 20 µm are required. In this work, novel Three Dimensional (3D) multi channel microprobes were fabricated offering 32 independent stimulation and recording electrodes around the shaft of the implant. These microprobes can control the spatial distribution of the charge injected into the tissue to enhance the efficacy and minimize the adverse effects of the DBS treatment. Furthermore, the device volume has been reduced to one third the volume of a conventional Medtronic DBS lead to significantly decrease the tissue damage induced by implantation of the microprobe. For both DBS and intracortical microprobes, the impedance characteristics of the electrodes were studied in acidic and saline solutions. To reduce the channel impedance and enhance the signal to noise ratio, iridium (Ir) was electroplated on gold electrode sites. Stable electrical characteristics were demonstrated for the Ir and gold electrodes over the course of a prolonged pulse stress test for 100 million cycles. The functionality and application potential of the fabricated microprobes were confirmed by the in-vitro measurements of the neural activity in the mouse hippocampus. In order to reduce the number of channels and simplify the signal processing circuitry, multiport electrostatic-actuated switch matrices were successfully developed, fabricated, and characterized for possible integration with neural microprobes to construct a site selection matrix. Magnetic-actuated switches have been also investigated to improve the operation reliability of the MEMS switching devices

Microheater: material, design, fabrication, temperature control, and applications—a role in COVID‑19

Heating plays a vital role in science, engineering, mining, and space, where heating can be achieved via electrical, induction, infrared, or microwave radiation. For fast switching and continuous applications, hotplate or Peltier elements can be employed. However, due to bulkiness, they are inefective for portable applications or operation at remote locations. Miniaturization of heaters reduces power consumption and bulkiness, enhances the thermal response, and integrates with several sensors or microfuidic chips. The microheater has a thickness of~100 nm to~100 μm and ofers a temperature range up to 1900℃ with precise control. In recent years, due to the escalating demand for fexible electronics, thin-flm microheaters have emerged as an imperative research area. This review provides an overview of recent advancements in microheater as well as analyses diferent microheater designs, materials, fabrication, and temperature control. In addition, the applications of microheaters in gas sensing, biological, and electrical and mechanical sectors are emphasized. Moreover, the maximum temperature, voltage, power consumption, response time, and heating rate of each microheater are tabulated. Finally, we addressed the specifc key considerations for designing and fabricating a microheater as well as the importance of microheater integration in COVID-19 diagnostic kits. This review thereby provides general guidelines to researchers to integrate microheater in micro-electromechanical systems (MEMS), which may pave the way for developing rapid and large-scale SARS-CoV-2 diagnostic kits in resource-constrained clinical or home-based environments

Inductively Coupled CMOS Power Receiver For Embedded Microsensors

Inductively coupled power transfer can extend the lifetime of embedded microsensors that save costs, energy, and lives. To expand the microsensors' functionality, the transferred power needs to be maximized. Plus, the power receiver needs to handle wide coupling variations in real applications. Therefore, the objective of this research is to design a power receiver that outputs the highest power for the widest coupling range. This research proposes a switched resonant half-bridge power stage that adjusts both energy transfer frequency and duration so the output power is maximally high. A maximum power point (MPP) theory is also developed to predict the optimal settings of the power stage with 98.6% accuracy. Finally, this research addresses the system integration challenges such as synchronization and over-voltage protection. The fabricated self-synchronized prototype outputs up to 89% of the available power across 0.067%~7.9% coupling range. The output power (in percentage of available power) and coupling range are 1.3× and 13× higher than the comparable state of the arts.Ph.D

Microelectromechanical Systems and Devices

The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators

Microfluidics and Nanofluidics Handbook

The Microfluidics and Nanofluidics Handbook: Two-Volume Set comprehensively captures the cross-disciplinary breadth of the fields of micro- and nanofluidics, which encompass the biological sciences, chemistry, physics and engineering applications. To fill the knowledge gap between engineering and the basic sciences, the editors pulled together key individuals, well known in their respective areas, to author chapters that help graduate students, scientists, and practicing engineers understand the overall area of microfluidics and nanofluidics. Topics covered include Finite Volume Method for Numerical Simulation Lattice Boltzmann Method and Its Applications in Microfluidics Microparticle and Nanoparticle Manipulation Methane Solubility Enhancement in Water Confined to Nanoscale Pores Volume Two: Fabrication, Implementation, and Applications focuses on topics related to experimental and numerical methods. It also covers fabrication and applications in a variety of areas, from aerospace to biological systems. Reflecting the inherent nature of microfluidics and nanofluidics, the book includes as much interdisciplinary knowledge as possible. It provides the fundamental science background for newcomers and advanced techniques and concepts for experienced researchers and professionals