E-D2HCP: enhanced distributed dynamic host configuration protocol

Mobile Ad Hoc Networks (MANETs) consist of mobile nodes equipped with wireless devices. They do not need any kind of pre-existent infrastructure and are about self-managed networks. MANETs enable communication between mobile nodes without direct links and across multihop paths. To ensure correct operation of the routing protocols, MANETs, have to assign unique IP addresses to the MANET devices. Furthermore, the address assignment is an important issue when dealing with MANET networks because the traditional approaches are not applicable without some changes, having to provide new protocols for the address auto-configuration. These schemes must take into account the properties of MANETs such as dynamic topology, limited resources or lack of infrastructure. In this paper, we propose a stateful scheme for dynamic allocation of IP addresses in MANETs entitled Extended Distributed Dynamic Host Configuration Protocol because it is based on a previous piece of work (D2CHP). This extension includes the network merging not covered by its predecessor. Simulation results show that the new protocol also improves D2HCP functionality in areas such as fault tolerance, concurrency and latency.Sección Deptal. de Sistemas Informáticos y ComputaciónFac. de Ciencias MatemáticasTRUEAgencia Espanola de Cooperacion Internacional para el Desarrollo (AECID, Spain) through Accion Integrada MAEC-AECID MEDITERRANEOSecurity Engineering Research Center - Ministry of Knowledge Economy (MKE, Korea)pu

Design and Implementation of ID Based MANET Autoconfiguration Protocol

Auto-configuration protocols are used for assignment of unique IP addresses to nodes in Mobile ad hoc networks. Without the assignment of unique IP addresses, service provisioning between the nodes is not possible. Such protocols use various heuristics to ensure the uniqueness in IP address assignment; such aspects increase the overall complexity in MANET system design. Moreover the overriding role of IP address as an ID in Application layer and Locator in routing space is a bottleneck in future wireless network (FWN) design. Contemporary FWN research is focusing on ID/Locator split concept designs. In this paper we propose an ID/Locator based architecture for MANETs which also solves               auto-configuration requirements for MANETs. Our proposed architecture is an adaptation from available ID/Locator split concepts for infrastructure oriented networks for usage in MANET context. The designed protocol uses identifiers for node identification, node discovery and traffic flow between end points. The protocol support provision for running contemporary IP oriented services. We have also verified various use cases of our proposed protocol through Linux based implementation

Distributed Dynamic Host Configuration Protocol (D2HCP)

Mobile Ad Hoc Networks (MANETs) are multihop wireless networks of mobile nodes without any fixed or preexisting infrastructure. The topology of these networks can change randomly due to the unpredictable mobility of nodes and their propagation characteristics. In most networks, including MANETs, each node needs a unique identifier to communicate. This work presents a distributed protocol for dynamic node IP address assignment in MANETs. Nodes of a MANET synchronize from time to time to maintain a record of IP address assignments in the entire network and detect any IP address leaks. The proposed stateful autoconfiguration scheme uses the OLSR proactive routing protocol for synchronization and guarantees unique IP addresses under a variety of network conditions, including message losses and network partitioning. Simulation results show that the protocol incurs low latency and communication overhead for IP address assignment

Proposta de um protocolo de roteamento autoconfigurável para redes mesh em Bluetooth Low Energy (BLE) baseado em proactive source routing

Orientador: Yuzo IanoTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: A Internet das Coisas (Internet of Things ¿ IoT) visa a criação de ambientes inteligentes como domótica, comunicação intra-veicular e redes de sensores sem fio (Wireless Sensor Network ¿ WSN), sendo que atualmente essa tecnologia vem crescendo de forma rápida. Uma das tecnologias sem fio utilizada para aplicações de curta distância que se encontra mais acessível à população, em geral, é o Bluetooth. No final de 2010, o Bluetooth Special Interest Group (Bluetooth SIG), lançou a especificação Bluetooth 4.0 e, como parte dessa especificação, tem-se o Bluetooth Low Energy (BLE). O BLE é uma tecnologia sem fio de baixíssimo consumo de potência, que pode ser alimentada por uma bateria tipo moeda, ou até mesmo por indução elétrica (energy harvesting). A natureza do Bluetooth (e BLE) é baseada na conexão do tipo Mestre/Escravo. Muitos estudos mostram como criar redes mesh baseadas no Bluetooth clássico, que são conhecidas como Scatternets, onde alguns nós são utilizados como escravos com o objetivo de repassar os dados entre os mestres. Contudo, o BLE não tinha suporte para a mudança entre mestre e escravo até o lançamento da especificação Bluetooth 4.1, em 2013. A capacidade de uma tecnologia sem fio para IoT de criar uma rede ad-hoc móvel (Mobile Ad-hoc Network ¿ MANET) é vital para poder suportar uma grande quantidade de sensores, periféricos e dispositivos que possam coexistir em qualquer ambiente. Este trabalho visa propor um novo método de autoconfiguração para BLE, com descoberta de mapa de roteamento e manutenção, sem a necessidade de mudanças entre mestre e escravo, sendo compatível com os dispositivos Bluetooth 4.0, assim como com os 4.1 e mais recentes. Qualquer protocolo de mensagens pode aproveitar o método proposto para descobrir e manter a topologia de rede mesh em cada um dos seus nósAbstract: Nowadays, the Internet of Things (IoT) is spreading rapidly towards creating smart environments. Home automation, intra-vehicular interaction, and wireless sensor networks (WSN) are among the most popular applications discussed in IoT literature. One of the most available and popular wireless technologies for short-range operations is Bluetooth. In late 2010, the Bluetooth Special Interest Group (SIG) launched the Bluetooth 4.0 Specification, which brings Bluetooth Low Energy (BLE) as part of the specification. BLE characterises as being a very low power wireless technology, capable of working on a coin-cell or even by energy scavenging. Nevertheless, the nature of Bluetooth (and BLE) has always been a connection-oriented communication in a Master/Slave configuration. Several studies exist showing how to create mesh networks for Classic Bluetooth, called Scatternets, by utilizing some nodes as slaves to relay data between Masters. However, BLE didn¿t support role changing until the 4.1 Specification released in 2013. The capability of a wireless technology to create a Mobile Ad-Hoc Network (MANET) is vital for supporting the plethora of sensors, peripherals, and devices that could coexist in any IoT environment. This work focuses on proposing a new autoconfiguring dynamic address allocation scheme for a BLE Ad-Hoc network, and a network map discovery and maintenance mechanism that doesn¿t require role changing, thus being possible to implement it in 4.0 compliant devices as well as 4.1 or later to develop a MANET. Any ad-hoc routing protocol can utilise the proposed method to discover, keep track, and maintain the mesh network node topology in each of their nodesDoutoradoTelecomunicações e TelemáticaDoutor em Engenharia ElétricaCAPE

Security Issues in Mobile Ad Hoc Networks

Ad hoc networks are built on the basis of a communication without infrastructure and major investigations have focused on the routing and autoconfiguration problems. However, there is a little progress in solving the secure autoconfiguration problems in mobile ad hoc networks (MANETs), which has led to the proliferation of threats given the vulnerabilities of MANETs. It is clear that ad hoc networks have no centralized mechanism for defense against threats, such as a firewall, an intrusion detection system, or a proxy. Therefore, it is necessary that the defense of interests of each of the ad hoc components is the responsibility of each member node. This paper shows the most common threats to ad hoc networks and reviews several proposals that attempt to minimize some of these threats, showing their protection ability and vulnerabilities in light of the threats that might aris