Perfect tag identification protocol in RFID networks

Radio Frequency IDentification (RFID) systems are becoming more and more popular in the field of ubiquitous computing, in particular for objects identification. An RFID system is composed by one or more readers and a number of tags. One of the main issues in an RFID network is the fast and reliable identification of all tags in the reader range. The reader issues some queries, and tags properly answer. Then, the reader must identify the tags from such answers. This is crucial for most applications. Since the transmission medium is shared, the typical problem to be faced is a MAC-like one, i.e. to avoid or limit the number of tags transmission collisions. We propose a protocol which, under some assumptions about transmission techniques, always achieves a 100% perfomance. It is based on a proper recursive splitting of the concurrent tags sets, until all tags have been identified. The other approaches present in literature have performances of about 42% in the average at most. The counterpart is a more sophisticated hardware to be deployed in the manufacture of low cost tags.Comment: 12 pages, 1 figur

Energy aware improved least and most significant bit arbitration algorithm for WORM tags

AbstractPassive Radio Frequency Identification systems have gained enormous attention and popularity especially after its adoption in time and data critical systems. Theoretically, these systems have the potential to read over 100 tags per second in applications which are well insulated from RF noise. Nevertheless, this may not be the case in practical systems, as tag collision is one of the major deterrents affecting the recognition rate. This paper exhaustively analyses the existing probabilistic, deterministic and hybrid algorithms on collision resolutions. In probabilistic algorithms, tags send their entire ID to the RFID reader in respective slots while tags in deterministic algorithms respond bit by bit based on the RFID reader’s query. To minimize identification delay, tag communication overhead and high energy consumption, a new energy efficient collision resolution strategy named Improved Least and Most Significant Bit Algorithm (LaMSBA) is introduced to effectively singulate a tag and increase the identification efficiency in changing tag population even when the bits in tag ID’s are randomly or uniformly distributed. Extensive simulation studies show that LaMSBA can be chosen as better alternatives for dense time and data critical RFID enabled systems. In addition, M/G/1 Queuing model is suitably identified and the the analytical results concluded that LaMSBA is able to maintain the steady state condition even when Class 1 tags arrive at the rate of 15 tags/second in the reader’s interrogation zone

Tag anti-collision algorithms in RFID systems - a new trend

RFID is a wireless communication technology that provides automatic identification or tracking and data collection from any tagged object. Due to the shared communication channel between the reader and the tags during the identification process in RFID systems, many tags may communicate with the reader at the same time, which causes collisions. The problem of tag collision has to be addressed to have fast multiple tag identification process. There are two main approaches to the tag collision problem: ALOHA based algorithms and tree based algorithms. Although these methods reduce the collision and solve the problem to some extent, they are not fast and efficient enough in real applications. A new trend emerged recently which takes the advantages of both ALOHA and tree based approaches. This paper describes the process and performance of the tag anti-collision algorithms of the tree-ALOHA trend

From M-ary Query to Bit Query: a new strategy for efficient large-scale RFID identification

The tag collision avoidance has been viewed as one of the most important research problems in RFID communications and bit tracking technology has been widely embedded in query tree (QT) based algorithms to tackle such challenge. Existing solutions show further opportunity to greatly improve the reading performance because collision queries and empty queries are not fully explored. In this paper, a bit query (BQ) strategy based Mary query tree protocol (BQMT) is presented, which can not only eliminate idle queries but also separate collided tags into many small subsets and make full use of the collided bits. To further optimize the reading performance, a modified dual prefixes matching (MDPM) mechanism is presented to allow multiple tags to respond in the same slot and thus significantly reduce the number of queries. Theoretical analysis and simulations are supplemented to validate the effectiveness of the proposed BQMT and MDPM, which outperform the existing QT-based algorithms. Also, the BQMT and MDPM can be combined to BQMDPM to improve the reading performance in system efficiency, total identification time, communication complexity and average energy cost

Idle-slots elimination based binary splitting anti-collision algorithm for RFID

Tag collision avoidance is critical to the success of data communications in radio frequency identification (RFID) system. This paper presents an efficient idle-slots elimination based binary splitting (ISE-BS) algorithm to improve the performance of RFID system. In ISE-BS, by introducing 1 bit random number Q and 16-bits random number serial identifier (SID)which are transmitted before data exchange, tag collisions can be informed and unnecessary data exchange between reader and tags can be further eliminated. Moreover, ISE-BS exploits Q to separate conflicting tags into ‘0-1’ subsets randomly. Specifically, the tags in subset ‘0’ will start to transmit in the next period, where the success flag signal reflects the immediate data transmission. The tags in subset ‘1’ will wait in the pipeline. In such a way, the idle slots introduced by conventional binary splitting anti-collision algorithms can be removed with schedule of ISEBS. Extensive simulation results show that ISE-BS outperforms the existing proposed algorithms

Survey on Lightweight Primitives and Protocols for RFID in Wireless Sensor Networks

The use of radio frequency identification (RFID) technologies is becoming widespread in all kind of wireless network-based applications. As expected, applications based on sensor networks, ad-hoc or mobile ad hoc networks (MANETs) can be highly benefited from the adoption of RFID solutions. There is a strong need to employ lightweight cryptographic primitives for many security applications because of the tight cost and constrained resource requirement of sensor based networks. This paper mainly focuses on the security analysis of lightweight protocols and algorithms proposed for the security of RFID systems. A large number of research solutions have been proposed to implement lightweight cryptographic primitives and protocols in sensor and RFID integration based resource constraint networks. In this work, an overview of the currently discussed lightweight primitives and their attributes has been done. These primitives and protocols have been compared based on gate equivalents (GEs), power, technology, strengths, weaknesses and attacks. Further, an integration of primitives and protocols is compared with the possibilities of their applications in practical scenarios

Identifying RFID Tags in Collisions

How to obtain the information from massive tags is a key focus of RFID applications. The occurrence of collisions leads to problems such as reduced identification efficiency in RFID networks. To tackle such challenges, most tag collision arbitration protocols focus on scheduling tag identification with collision avoidance. However, how to effectively identify tags in collisions to improve identification efficiency has not been well explored. In this paper, we propose a group query allocation method to divide the string space into mutually disjoint subsets which contains several strings. Each string can be viewed as a full ID or partial ID of a tag. When multiple string from a subset are sent simultaneously, the reader can identify all of them in a time slot. Based on the group query allocation method, a segment detection based characteristic group query tree (SD-CGQT) protocol is presented for fast tag identification by significantly reducing the collision slots and transmitted bits. Numerous experimental results verify the superiority of the proposed SD-CGQT, compared to prior arts in system efficiency, total identification time, communication complexity and energy consumption