Joint On-the-Fly Network Coding/Video Quality Adaptation for Real-Time Delivery

This paper introduces a redundancy adaptation algorithm for an on-the-fly erasure network coding scheme called Tetrys in the context of real-time video transmission. The algorithm exploits the relationship between the redundancy ratio used by Tetrys and the gain or loss in encoding bit rate from changing a video quality parameter called the Quantization Parameter (QP). Our evaluations show that with equal or less bandwidth occupation, the video protected by Tetrys with redundancy adaptation algorithm obtains a PSNR gain up to or more 4 dB compared to the video without Tetrys protection. We demonstrate that the Tetrys redundancy adaptation algorithm performs well with the variations of both loss pattern and delay induced by the networks. We also show that Tetrys with the redundancy adaptation algorithm outperforms FEC with and without redundancy adaptation

Achieving reliable and enhanced communication in vehicular ad hoc networks (VANETs)

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirement for the degree of Doctor of PhilosophyWith the envisioned age of Internet of Things (IoTs), different aspects of Intelligent Transportation System (ITS) will be linked so as to advance road transportation safety, ease congestion of road traffic, lessen air pollution, improve passenger transportation comfort and significantly reduce road accidents. In vehicular networks, regular exchange of current position, direction, speed, etc., enable mobile vehicle to foresee an imminent vehicle accident and notify the driver early enough in order to take appropriate action(s) or the vehicle on its own may take adequate preventive measures to avert the looming accident. Actualizing this concept requires use of shared media access protocol that is capable of guaranteeing reliable and timely broadcast of safety messages. This dissertation investigates the use of Network Coding (NC) techniques to enrich the content of each transmission and ensure improved high reliability of the broadcasted safety messages with less number of retransmissions. A Code Aided Retransmission-based Error Recovery (CARER) protocol is proposed. In order to avoid broadcast storm problem, a rebroadcasting vehicle selection metric η, is developed, which is used to select a vehicle that will rebroadcast the received encoded message. Although the proposed CARER protocol demonstrates an impressive performance, the level of incurred overhead is fairly high due to the use of complex rebroadcasting vehicle selection metric. To resolve this issue, a Random Network Coding (RNC) and vehicle clustering based vehicular communication scheme with low algorithmic complexity, named Reliable and Enhanced Cooperative Cross-layer MAC (RECMAC) scheme, is proposed. The use of this clustering technique enables RECMAC to subdivide the vehicular network into small manageable, coordinated clusters which further improve transmission reliability and minimise negative impact of network overhead. Similarly, a Cluster Head (CH) selection metric ℱ(\u1d457) is designed, which is used to determine and select the most suitably qualified candidate to become the CH of a particular cluster. Finally, in order to investigate the impact of available radio spectral resource, an in-depth study of the required amount of spectrum sufficient to support high transmission reliability and minimum latency requirements of critical road safety messages in vehicular networks was carried out. The performance of the proposed schemes was clearly shown with detailed theoretical analysis and was further validated with simulation experiments

Throughput of ADSL modems

This paper considers the throughput of ADSL (Asymmetric Digital Subscriber Line) modems, used for high-speed data transmission over relatively unreliable connections, e.g. copper telephone wires. The modem technique uses an error correcting code and interleaving. The settings include a grouping factor $S$ which affects the amount of data per code word, the number $R$ of redundant bytes per code word and the interleave depth $D$. The influence of these parameters on both the effective data transmission rate and the resulting error rate in the received signal are determined for two error situations: random errors and bursts of errors. An approximate analysis for the random error case of the throughput of a TCP (Transport Control Protocol) connection using an ADSL modem shows that maximum throughput is obtained for the highest values of $S$ and $R$

Error resilient packet switched H.264 video telephony over third generation networks.

Real-time video communication over wireless networks is a challenging problem because wireless channels suffer from fading, additive noise and interference, which translate into packet loss and delay. Since modern video encoders deliver video packets with decoding dependencies, packet loss and delay can significantly degrade the video quality at the receiver. Many error resilience mechanisms have been proposed to combat packet loss in wireless networks, but only a few were specifically designed for packet switched video telephony over Third Generation (3G) networks. The first part of the thesis presents an error resilience technique for packet switched video telephony that combines application layer Forward Error Correction (FEC) with rateless codes, Reference Picture Selection (RPS) and cross layer optimization. Rateless codes have lower encoding and decoding computational complexity compared to traditional error correcting codes. One can use them on complexity constrained hand-held devices. Also, their redundancy does not need to be fixed in advance and any number of encoded symbols can be generated on the fly. Reference picture selection is used to limit the effect of spatio-temporal error propagation. Limiting the effect of spatio-temporal error propagation results in better video quality. Cross layer optimization is used to minimize the data loss at the application layer when data is lost at the data link layer. Experimental results on a High Speed Packet Access (HSPA) network simulator for H.264 compressed standard video sequences show that the proposed technique achieves significant Peak Signal to Noise Ratio (PSNR) and Percentage Degraded Video Duration (PDVD) improvements over a state of the art error resilience technique known as Interactive Error Control (IEC), which is a combination of Error Tracking and feedback based Reference Picture Selection. The improvement is obtained at a cost of higher end-to-end delay. The proposed technique is improved by making the FEC (Rateless code) redundancy channel adaptive. Automatic Repeat Request (ARQ) is used to adjust the redundancy of the Rateless codes according to the channel conditions. Experimental results show that the channel adaptive scheme achieves significant PSNR and PDVD improvements over the static scheme for a simulated Long Term Evolution (LTE) network. In the third part of the thesis, the performance of the previous two schemes is improved by making the transmitter predict when rateless decoding will fail. In this case, reference picture selection is invoked early and transmission of encoded symbols for that source block is aborted. Simulations for an LTE network show that this results in video quality improvement and bandwidth savings. In the last part of the thesis, the performance of the adaptive technique is improved by exploiting the history of the wireless channel. In a Rayleigh fading wireless channel, the RLC-PDU losses are correlated under certain conditions. This correlation is exploited to adjust the redundancy of the Rateless code and results in higher Rateless code decoding success rate and higher video quality. Simulations for an LTE network show that the improvement was significant when the packet loss rate in the two wireless links was 10%. To facilitate the implementation of the proposed error resilience techniques in practical scenarios, RTP/UDP/IP level packetization schemes are also proposed for each error resilience technique. Compared to existing work, the proposed error resilience techniques provide better video quality. Also, more emphasis is given to implementation issues in 3G networks

Energy Efficiency in Communications and Networks

The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure

Opportunistic Routing with Network Coding in Powerline Communications

Opportunistic Routing (OR) can be used as an alternative to the legacy routing (LR) protocols in networks with a broadcast lossy channel and possibility of overhearing the signal. The power line medium creates such an environment. OR can better exploit the channel than LR because it allows the cooperation of all nodes that receive any data. With LR, only a chain of nodes is selected for communication. Other nodes drop the received information. We investigate OR for the one-source one-destination scenario with one traffic flow. First, we evaluate the upper bound on the achievable data rate and advocate the decentralized algorithm for its calculation. This knowledge is used in the design of Basic Routing Rules (BRR). They use the link quality metric that equals the upper bound on the achievable data rate between the given node and the destination. We call it the node priority. It considers the possibility of multi-path communication and the packet loss correlation. BRR allows achieving the optimal data rate pertaining certain theoretical assumptions. The Extended BRR (BRR-E) are free of them. The major difference between BRR and BRR-E lies in the usage of Network Coding (NC) for prognosis of the feedback. In this way, the protocol overhead can be severely reduced. We also study Automatic Repeat-reQuest (ARQ) mechanism that is applicable with OR. It differs to ARQ with LR in that each sender has several sinks and none of the sinks except destination require the full recovery of the original message. Using BRR-E, ARQ and other services like network initialization and link state control, we design the Advanced Network Coding based Opportunistic Routing protocol (ANChOR). With the analytic and simulation results we demonstrate the near optimum performance of ANChOR. For the triangular topology, the achievable data rate is just 2% away from the theoretical maximum and it is up to 90% higher than it is possible to achieve with LR. Using the G.hn standard, we also show the full protocol stack simulation results (including IP/UDP and realistic channel model). In this simulation we revealed that the gain of OR to LR can be even more increased by reducing the head-of-the-line problem in ARQ. Even considering the ANChOR overhead through additional headers and feedbacks, it outperforms the original G.hn setup in data rate up to 40% and in latency up to 60%.:1 Introduction 2 1.1 Intra-flow Network Coding 6 1.2 Random Linear Network Coding (RLNC) 7 2 Performance Limits of Routing Protocols in PowerLine Communications (PLC) 13 2.1 System model 14 2.2 Channel model 14 2.3 Upper bound on the achievable data rate 16 2.4 Achieving the upper bound data rate 17 2.5 Potential gain of Opportunistic Routing Protocol (ORP) over Common Single-path Routing Protocol (CSPR) 19 2.6 Evaluation of ORP potential 19 3 Opportunistic Routing: Realizations and Challenges 24 3.1 Vertex priority and cooperation group 26 3.2 Transmission policy in idealized network 34 3.2.1 Basic Routing Rules (BRR) 36 3.3 Transmission policy in real network 40 3.3.1 Purpose of Network Coding (NC) in ORP 41 3.3.2 Extended Basic Routing Rules (BRR) (BRR-E) 43 3.4 Automatic ReQuest reply (ARQ) 50 3.4.1 Retransmission request message contents 51 3.4.2 Retransmission Request (RR) origination and forwarding 66 3.4.3 Retransmission response 67 3.5 Congestion control 68 3.5.1 Congestion control in our work 70 3.6 Network initialization 74 3.7 Formation of the cooperation groups (coalitions) 76 3.8 Advanced Network Coding based Opportunistic Routing protocol (ANChOR) header 77 3.9 Communication of protocol information 77 3.10 ANChOR simulation . .79 3.10.1 ANChOR information in real time .80 3.10.2 Selection of the coding rate 87 3.10.3 Routing Protocol Information (RPI) broadcasting frequency 89 3.10.4 RR contents 91 3.10.5 Selection of RR forwarder 92 3.10.6 ANChOR stability 92 3.11 Summary 95 4 ANChOR in the Gigabit Home Network (G.hn) Protocol 97 4.1 Compatibility with the PLC protocol stack 99 4.2 Channel and noise model 101 4.2.1 In-home scenario 102 4.2.2 Access network scenario 102 4.3 Physical layer (PHY) layer implementation 102 4.3.1 Bit Allocation Algorithm (BAA) 103 4.4 Multiple Access Control layer (MAC) layer 109 4.5 Logical Link Control layer (LLC) layer 111 4.5.1 Reference Automatic Repeat reQuest (ARQ) 111 4.5.2 Hybrid Automatic Repeat reQuest (HARQ) in ANChOR 114 4.5.3 Modeling Protocol Data Unit (PDU) erasures on LLC 116 4.6 Summary 117 5 Study of G.hn with ANChOR 119 5.1 ARQ analysis 119 5.2 Medium and PHY requirements for “good” cooperation 125 5.3 Access network scenario 128 5.4 In-home scenario 135 5.4.1 Modeling packet erasures 136 5.4.2 Linear Dependence Ratio (LDR) 139 5.4.3 Worst case scenario 143 5.4.4 Analysis of in-home topologies 145 6 Conclusions . . . . . . . . . . . . . . . 154 A Proof of the neccessity of the exclusion rule 160 B Gain of ORPs to CSRPs 163 C Broadcasting rule 165 D Proof of optimality of BRR for triangular topology 167 E Reducing the retransmission probability 168 F Calculation of Expected Average number of transmissions (EAX) for topologies with bi-directional links 170 G Feedback overhead of full coding matrices 174 H Block diagram of G.hn physical layer in ns-3 model 175 I PER to BER mapping 17