Effect of hydroxyapatite nanoparticles on the degradability of random poly(butylene terephthalate-co-aliphatic dicarboxylate)s having a high content of terephthalic units

Copolyesters derived from 1,4-butanediol and constituted also of aliphatic and aromatic dicarboxylate units in a molar ratio of 3:7 were synthesized by a two-step polycondensation procedure. Succinic, adipic, and sebacic acids were specifically selected as the aliphatic component whereas terephthalic acid was chosen as the aromatic moiety. The second synthesis step was a thermal transesterification between the corresponding homopolymers, always attaining a random distribution as verified by NMR spectroscopy. Hybrid polymer composites containing 2.5 wt % of hydroxyapatite (HAp) were also prepared by in situ polymerization. Hydroxyl groups on the nanoparticle surface allowed the grafting of polymer chains in such a way that composites were mostly insoluble in the typical solvents of the parent copolyesters. HAp had some influence on crystallization from the melt, thermal stability, and mechanical properties. HAp also improved the biocompatibility of samples due to the presence of Ca2+ cations and the damping effect of phosphate groups. Interestingly, HAp resulted in a significant increase in the hydrophilicity of samples, which considerably affected both enzymatic and hydrolytic degradability. Slight differences were also found in the function of the dicarboxylic component, as the lowest degradation rates was found for the sample constituted of the most hydrophobic sebacic acid units. View Full-TextPeer ReviewedPostprint (published version

Novel "green" catalysts for controlled ring-opening polymerization of lactide

Syntéza polylaktidu (PLA) polymerací za otevření kruhu cyklického monomeru (ROP) může být uskutečněna různými způsoby. Literatura uvádí více než 100 katalytických systémů, jejichž pomocí lze polylaktid a jiné biodegradabilní alifatické polyestery získat. Například organokovové katalyzátory na bázi Sn, Zn, Al atd. se po splnění své polymerační funkce stávají kontaminanty a pro humánní implantáty je použití takového materiálu diskutabilní. V současné době jsou v centru výzkumné pozornosti nové N-heterocyklické karbenové katalyzátory. Tyto „metal-free“ katalytické struktury jsou schopné reprodukovatelně řídit syntézu polymerů předem definované molekulové hmotnosti s definovanými koncovými skupinami a nízkou polydisperzitou, která je charakteristická pro živý průběh polymerace. Nabízí se možnost syntézy blokových kopolymerů a různorodých makromolekulárních architektur. Předložená diplomová práce se zabývá studiem polymerace cyklického monomeru D,L-laktidu katalyzované N-heterocyklickým karbenem. Polymerace byly vedeny v přítomnosti benzylalkoholu jako iniciátoru v roztoku THF. Byl sledován vliv složení reakčního systému monomer – iniciátor – katalyzátor. Dále byly připraveny polymery opticky čistého L-laktidu s makroiniciátory PEG s Mn = 1000 a 2000 g/mol. Střední číselná molekulová hmotnost (Mn) a polydisperzita (PDI) byly stanoveny pomocí GPC. Definovatelnost koncových skupin vybraných polymerů byla prokázána pomocí 1H NMR.The synthesis of polylactide (PLA) by ring-opening polymerization (ROP) of cyclic monomer can be realized by different routes. More than 100 catalysts for the synthesis of polylactide and other biodegradable aliphatic polyesters are published in the literature. For example organometallic catalysts based on Sn, Zn, Al etc. after finishing polymerization function became contaminants and using obtained polymer material in human body is controversial. At present, the research is focused on novel N-hererocyclic carbene catalysts. These metal-free catalysts are able to produce polymers with controlled molecular weight, narrow polydispersity, end-group fidelity with high reproducibility as well as to synthesize the block copolymers and complex macromolecular architectures, which is characteristic for living polymerization system. This diploma thesis is focused on study of polymerization of cyclic monomer D,L-lactide catalyzed by N-hererocyclic carbene. Polymerizations were carried out at the presence of benzylalcohol as initiator at THF. We were focused on the influence of composition of reaction system monomer – initiator – catalyst. Polymers of optically pure L-lactide with macroinitiators PEG with Mn of 1000 a 2000 g/mol were prepared as well. Number average molecular weight (Mn) and polydispersity index (PDI) was determined by GPC. 1H NMR was used to prove end-group fidelity.

Biodegradability and biocompatibility of copoly(butylene sebacate-co-terephthalate)s

In the present study poly (butylene sebacate-co-terephthalate)s having different compositions were synthesized with a high yield and a random distribution by thermal transesterification of poly (butylene sebacate) and poly (butylene terephthalate) homopolymers. The copolymer with the highest comonomer ratio was the least crystalline sample, although the melting peaks corresponding to both, sebacate and terephthalate-rich phases were still observable in calorimetric heating runs. This copolymer was associated with interesting thermal and mechanical properties, as the maximum melting point was higher than 100 °C and the storage modulus was also high (i.e. 1.1 × 109 N/m2 and 1.7 108 N/m2 were determined just before and after the main glass transition temperature of -12 °C). As all studied samples were thermally stable up to temperatures clearly higher than the fusion temperature, they could be easily processed. Increasing the terephthalate content of the copolymers resulted in higher hydrophobicity, which had a minor influence on cell adhesion and proliferation of both fibroblast-like and epithelial-like cells. Hydrolytic and enzymatic degradability were assessed and the effect of composition and crystallinity on the degradation rate was investigated. Molecular weight measurements during exposure to a hydrolytic media indicated a first order kinetic mechanism during the initial stages of degradation before reaching a limiting molecular size, which was indicative of solubilization. The most amorphous sample appears as a highly promising biodegradable material since it showed a significant weight loss during exposure to all selected degradation media, but also exhibited good performance and properties that were comparable to those characteristic of polyethylenePeer ReviewedPostprint (author's final draft

Isohexide and sorbitol-derived, enzymatically synthesized renewable polyesters with enhanced Tg

Sugar-based polyesters derived from sorbitol and isohexides were obtained via solvent-free enzymatic catalysis. Pendant hydroxyl groups, coming from the sorbitol units, were present along the polyester backbone, whereas the two isohexides, namely, isomannide and isoidide dimethyl ester monomers, were selected to introduce rigidity into the polyester chains. The feasibility of incorporating isomannide as a diol compared to the isoidide dimethyl ester as acyl-donor via lipase-catalyzed polycondensation was investigated. The presence of bicyclic units resulted in enhanced Tg with respect to the parent sorbitol-containing polyester lacking isohexides. The different capability of the two isohexides to boost the thermal properties confirmed the more flexible character provided by the isoidide diester derivative. Solvent-borne coatings were prepared by cross-linking the sugar-based polyester polyols with polyisocyanates. The increased rigidity of the obtained sugar-based polyester polyols led to an enhancement in hardness of the resulting coatings.Peer ReviewedPostprint (author's final draft

Fully bio-based aromatic–aliphatic copolyesters: poly(butylene furandicarboxylate-co-succinate)s obtained by ring opening polymerization

Poly(butylene 2,5-furandicarboxylate-co-succinate) copolyesters (coPBFxSy) have been synthesized by ring opening polymerization (ROP). Cyclic butylene 2,5-furandicarboxylate and butylene succinate oligomer mixtures, to be used as monomers for ROP, were prepared by high dilution condensation and enzymatic cyclization reactions, respectively. Two different catalytic systems, tin dioctanoate and supported Candida antarctica lipase B (CALB), were used for polymerization. Thus two series of copolyesters covering the whole range of compositions were prepared and their properties comparatively examined. In both cases, random copolyesters with compositions close to those used in their respective feeds were obtained. The influence of composition on reaction kinetics with respect to time and temperature was evaluated for the two series. Chemically catalyzed ROP rendered copolyesters with Mw in the ~50 000–65 000 g mol-1 range, whereas values between 15 000 and 45 000 g mol-1 were attained when the ROP reaction was assisted by CALB. The thermal behavior of coPBFxSy obtained by ROP was similar to that reported for such copolymers prepared by melt polycondensation. They all start to decompose above 300 °C and display melting enthalpy and temperatures that decrease with copolymerization, attaining minimum values when the comonomer contents are approximate to balance. On the contrary, the glass-transition temperature increased almost linearly with the content of butylene furandicarboxylate units, covering the whole range of values between those of the two parent homopolyesters. Small deviations in thermal properties observed between the two series could be attributed to their differences in molecular weights. Hydrolytic and enzymatic degradation studies revealed that coPBFxSy became more degradable with increasing content of succinic units, whereas the homopolyester PBF remained practically unaffected when incubated under similar conditions.Peer ReviewedPostprint (author's final draft

Types and properties of metal-free catalysts for living polymerizations of biomaterials

Syntéza biokompatibilních a biodegradabilních polyesterů, použitelných převážně v medicíně, využívá pro polymeraci za otevření kruhu katalyzátory na bázi kovu (např. Sn, Al atd.), které se mohou po implantaci deponovat v těle. Podstatou bakalářské práce je popis netoxických "metal-free" karbenových sloučenin a jejich vlastností použitelných jako katalyzátory pro polymeraci cyklických esterů. Příprava těchto stabilních karbenových katalyzátorů a jejich charakterizace je cílem experimentání práce.Synthesis of biocompatible and biodegradable polyesters applicable mainly in biomedicine uses metal catalysts (based on Sn, Al etc.) for ring opening polymerization, which could be deposited in a body after implantation. Objective of the bachelor thesis is description of non-toxic metal-free carbene compounds and their properties utilizable as catalysts for polymerization of cyclic esters. Preparation of these stable free carbene catalysts and their characterization is the main goal of the experimental work.

Ring-opening copolymerization (ROCOP): synthesis and properties of polyesters and polycarbonates

Controlled routes to prepare polyesters and polycarbonates are of interest due to the widespread application of these materials and the opportunities provided to prepare new copolymers. Furthermore, ring-opening copolymerization may enable new poly(ester–carbonate) materials to be prepared which are inaccessible using alternative polymerizations. This review highlights recent advances in the ring-opening copolymerization catalysis, using epoxides coupled with anhydrides or CO2, to produce polyesters and polycarbonates. In particular, the structures and performances of various homogeneous catalysts are presented for the epoxide–anhydride copolymerization. The properties of the resultant polyesters and polycarbonates are presented and future opportunities highlighted for developments of both the materials and catalysts