Inter-class service differentiation and intra-class fairness in WDM optical burst switching networks

Ph.DDOCTOR OF PHILOSOPH

Cost functions in optical burst-switched networks

Optical Burst Switching (OBS) is a new paradigm for an all-optical Internet. It combines the best features of Optical Circuit Switching (OCS) and Optical Packet Switching (OPS) while avoidmg the mam problems associated with those networks .Namely, it offers good granularity, but its hardware requirements are lower than those of OPS. In a backbone network, low loss ratio is of particular importance. Also, to meet varying user requirements, it should support multiple classes of service. In Optical Burst-Switched networks both these goals are closely related to the way bursts are arranged in channels. Unlike the case of circuit switching, scheduling decisions affect the loss probability of future burst This thesis proposes the idea of a cost function. The cost function is used to judge the quality of a burst arrangement and estimate the probability that this burst will interfere with future bursts. Two applications of the cost functio n are proposed. A scheduling algorithm uses the value of the cost function to optimize the alignment of the new burst with other bursts in a channel, thus minimising the loss ratio. A cost-based burst droppmg algorithm, that can be used as a part of a Quality of Service scheme, drops only those bursts, for which the cost function value indicates that are most likely to cause a contention. Simulation results, performed using a custom-made OBS extension to the ns-2 simulator, show that the cost-based algorithms improve network performanc

Quality of service enhancement in optical burst switching networks without full wavelength convension capability

Ph.DDOCTOR OF PHILOSOPH

Algorithms for quality of service provisioning and enhancement in optical burst switched networks

Ph.DDOCTOR OF PHILOSOPH

On IP over WDM burst-switched long haul and metropolitan area networks

The IP over Wavelength Division Multiplexing (WDM) network is a natural evolution ushered in by the phenomenal advances in networking technologies and technical breakthroughs in optical communications, fueled by the increasing demand in the reduction of operation costs and the network management complexity. The unprecedented bandwidth provisioning capability and the multi-service supportability of the WDM technology, in synergy with the data-oriented internetworking mechanisms, facilitates a common shared infrastructure for the Next Generation Internet (NGJ). While NGI targets to perform packet processing directly on the optical transport layer, a smooth evolution is critical to success. Intense research has been conducted to design the new generation optical networks that retain the advantages of packet-oriented transport prototypes while rendering elastic network resource utilization and graded levels of service. This dissertation is focused on the control architecture, enabling technologies, and performance analysis of the WDM burst-switched long haul and Metropolitan Area Networks (MANs). Theoretical analysis and simulation results are reported to demonstrate the system performance and efficiency of proposed algorithms. A novel transmission mechanism, namely, the Forward Resource Reservation (ERR) mechanism, is proposed to reduce the end-to-end delay for an Optical Burst Switching (OBS)-based IP over WDM system. The ERR scheme adopts a Linear Predictive Filter and an aggressive reservation strategy for data burst length prediction and resource reservation, respectively, and is extended to facilitate Quality of Service (QoS) differentiation at network edges. The ERR scheme improves the real-time communication services for applications with time constraints without deleterious system costs. The aggressive strategy for channel holding time reservations is proposed. Specifically, two algorithms, the success probability-driven (SPD) and the bandwidth usage-driven (BUD) ones, are proposed for resource reservations in the FRRenabled scheme. These algorithms render explicit control on the latency reduction improvement and bandwidth usage efficiency, respectively, both of which are important figures of performance metrics. The optimization issue for the FRR-enabled system is studied based on two disciplines - addressing the static and dynamic models targeting different desired objectives (in terms of algorithm efficiency and system performance), and developing a \u27\u27crank back\u27\u27 based signaling mechanism to provide bandwidth usage efficiency. The proposed mechanisms enable the network nodes to make intelligent usage of the bandwidth resources. In addition, a new control architecture with enhanced address resolution protocol (E-ARP), burst-based transmission, and hop-based wavelength allocation is proposed for Ethernet-supported IP over WDM MANs. It is verified, via theoretical analysis and simulation results, that the E-ARP significantly reduces the call setup latency and the transmission requirements associated with the address probing procedures; the burst-based transport mechanism improves the network throughput and resource utilization; and the hop-based wavelength allocation algorithm provides bandwidth multiplexing with fairness and high scalability. The enhancement of the Ethernet services, in tandem with the innovative mechanisms in the WDM domain, facilitates a flexible and efficient integration, thus making the new generation optical MAN optimized for the scalable, survivable, and IP-dominated network at gigabit speed possible

A Performance Comparison According to Number of Wavelengths and Topologies on PCSA Reservation Mechanism for OBS

Abstract A performance comparison according to different number of wavelengths and topologies on OBS has been studied in this paper. Preemptive Channel Scheduling Algorithm (PCSA) has been used as reservation mechanism in OBS. In terms of performance criteria, loss rate in bytes, access delay and end-to-end delay are considered. A 2-state MMPP (Markov Modulated Poisson Process) traffic generator is used. Four different types of Mesh and Ring topologies are used. NS2 Network Simulation tool is used for our tests. In OBS algorithms, bursts are created using a hybrid model that takes into account both timeout and maximum length threshold mechanisms. In nodes, in order to satisfy QoS requirements, priority based queuing and Regulative Wavelength Grouping (RWG) are used. In priority based queuing, packets (bursts) are sent according to their priority order. In this study, the effects of generated traffic according to the topologies and the effects of increased number of wavelengths are shown by access delays. According to the simulation studies, the success of byte drop rate increases while the number of wavelengths increases. The results that obtained on mesh topologies are better than the results of ring topologies according to our simulation results

Isochronets: a High-Speed Network Switching Architecture

Traditional switching techniques need hundred- or thousand-MIPS processing power within switches to support Gbit/s transmission rates available today. These techniques anchor their decision-making on control information within transmitted frames and thus must resolve routes at the speed in which frames are being pumped into switches. Isochronets can potentially switch at any transmission rate by making switching decisions independent of frame contents. Isochronets divide network bandwidth among routing trees, a technique called Route Division Multiple Access (RDMA). Frames access network resources through the appropriate routing tree to the destination. Frame structures are irrelevant for switching decisions. Consequently, Isochronets can support multiple framing protocols without adaptation layers and are strong candidates for all-optical implementations. All network-layer functions are reduced to an admission control mechanism designed to provide quality of service (QOS) guarantees for multiple classes of traffic. The main results of this work are: (1) A new network architecture suitable for high-speed transmissions; (2) An implementation of Isochronets using cheap off-theshelf components; (3) A comparison of RDMA with more traditional switching techniques, such as Packet Switching and Circuit Switching; (4) New protocols necessary for Isochronet operations; and (5) Use of Isochronet techniques at higher layers of the protocol stack (in particular, we show how Isochronet techniques may solve routing problems in ATM networks)

Connection routing and configuration in optical burst switching networks

Ph.DDOCTOR OF PHILOSOPH

An Overview of the Isochronets Architecture for High Speed Networks

This paper overviews a novel switching architecture for high-speed networks: Isochronets. Isochronets time-divide network bandwidth among routing trees. Traffic moves down a routing tree to the root during its time band. Network functions such as routing and flow control are entirely governed by band timers and require no processing of frame headers bits. Frame motions need not be delayed for switch processing, allowing Isochronets to scale over a large spectrum of transmission speeds and support all-optical implementations. The network functions as a media-access layer that can support multiple framing protocols simultaneously, handled by higher layers at the periphery. Internetworking is reduced to a simple media-layer bridging. Isochronets provide flexible quality of service control and multicasting through allocation of bands to routing trees. They can be tuned to span a spectrum of performance behaviors outperforming both circuit or packet switching