15,442 research outputs found
High speed research system study. Advanced flight deck configuration effects
In mid-1991 NASA contracted with industry to study the high-speed civil transport (HSCT) flight deck challenges and assess the benefits, prior to initiating their High Speed Research Program (HSRP) Phase 2 efforts, then scheduled for FY-93. The results of this nine-month effort are presented, and a number of the most significant findings for the specified advanced concepts are highlighted: (1) a no nose-droop configuration; (2) a far forward cockpit location; and (3) advanced crew monitoring and control of complex systems. The results indicate that the no nose-droop configuration is critically dependent upon the design and development of a safe, reliable, and certifiable Synthetic Vision System (SVS). The droop-nose configuration would cause significant weight, performance, and cost penalties. The far forward cockpit location, with the conventional side-by-side seating provides little economic advantage; however, a configuration with a tandem seating arrangement provides a substantial increase in either additional payload (i.e., passengers) or potential downsizing of the vehicle with resulting increases in performance efficiencies and associated reductions in emissions. Without a droop nose, forward external visibility is negated and takeoff/landing guidance and control must rely on the use of the SVS. The technologies enabling such capabilities, which de facto provides for Category 3 all-weather operations on every flight independent of weather, represent a dramatic benefits multiplier in a 2005 global ATM network: both in terms of enhanced economic viability and environmental acceptability
FlightGoggles: A Modular Framework for Photorealistic Camera, Exteroceptive Sensor, and Dynamics Simulation
FlightGoggles is a photorealistic sensor simulator for perception-driven
robotic vehicles. The key contributions of FlightGoggles are twofold. First,
FlightGoggles provides photorealistic exteroceptive sensor simulation using
graphics assets generated with photogrammetry. Second, it provides the ability
to combine (i) synthetic exteroceptive measurements generated in silico in real
time and (ii) vehicle dynamics and proprioceptive measurements generated in
motio by vehicle(s) in a motion-capture facility. FlightGoggles is capable of
simulating a virtual-reality environment around autonomous vehicle(s). While a
vehicle is in flight in the FlightGoggles virtual reality environment,
exteroceptive sensors are rendered synthetically in real time while all complex
extrinsic dynamics are generated organically through the natural interactions
of the vehicle. The FlightGoggles framework allows for researchers to
accelerate development by circumventing the need to estimate complex and
hard-to-model interactions such as aerodynamics, motor mechanics, battery
electrochemistry, and behavior of other agents. The ability to perform
vehicle-in-the-loop experiments with photorealistic exteroceptive sensor
simulation facilitates novel research directions involving, e.g., fast and
agile autonomous flight in obstacle-rich environments, safe human interaction,
and flexible sensor selection. FlightGoggles has been utilized as the main test
for selecting nine teams that will advance in the AlphaPilot autonomous drone
racing challenge. We survey approaches and results from the top AlphaPilot
teams, which may be of independent interest.Comment: Initial version appeared at IROS 2019. Supplementary material can be
found at https://flightgoggles.mit.edu. Revision includes description of new
FlightGoggles features, such as a photogrammetric model of the MIT Stata
Center, new rendering settings, and a Python AP
Automation of the longwall mining system
Cost effective, safe, and technologically sound applications of automation technology to underground coal mining were identified. The longwall analysis commenced with a general search for government and industry experience of mining automation technology. A brief industry survey was conducted to identify longwall operational, safety, and design problems. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state of the art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system
Advanced flight control system study
A fly by wire flight control system architecture designed for high reliability includes spare sensor and computer elements to permit safe dispatch with failed elements, thereby reducing unscheduled maintenance. A methodology capable of demonstrating that the architecture does achieve the predicted performance characteristics consists of a hierarchy of activities ranging from analytical calculations of system reliability and formal methods of software verification to iron bird testing followed by flight evaluation. Interfacing this architecture to the Lockheed S-3A aircraft for flight test is discussed. This testbed vehicle can be expanded to support flight experiments in advanced aerodynamics, electromechanical actuators, secondary power systems, flight management, new displays, and air traffic control concepts
Identification of high-level functional/system requirements for future civil transports
In order to accommodate the rapid growth in commercial aviation throughout the remainder of this century, the Federal Aviation Administration (FAA) is faced with a formidable challenge to upgrade and/or modernize the National Airspace System (NAS) without compromising safety or efficiency. A recurring theme in both the Aviation System Capital Investment Plan (CIP), which has replaced the NAS Plan, and the new FAA Plan for Research, Engineering, and Development (RE&D) rely on the application of new technologies and a greater use of automation. Identifying the high-level functional and system impacts of such modernization efforts on future civil transport operational requirements, particularly in terms of cockpit functionality and information transfer, was the primary objective of this project. The FAA planning documents for the NAS of the 2005 era and beyond were surveyed; major aircraft functional capabilities and system components required for such an operating environment were identified. A hierarchical structured analysis of the information processing and flows emanating from such functional/system components were conducted and the results documented in graphical form depicting the relationships between functions and systems
Wireless communication, identification and sensing technologies enabling integrated logistics: a study in the harbor environment
In the last decade, integrated logistics has become an important challenge in
the development of wireless communication, identification and sensing
technology, due to the growing complexity of logistics processes and the
increasing demand for adapting systems to new requirements. The advancement of
wireless technology provides a wide range of options for the maritime container
terminals. Electronic devices employed in container terminals reduce the manual
effort, facilitating timely information flow and enhancing control and quality
of service and decision made. In this paper, we examine the technology that can
be used to support integration in harbor's logistics. In the literature, most
systems have been developed to address specific needs of particular harbors,
but a systematic study is missing. The purpose is to provide an overview to the
reader about which technology of integrated logistics can be implemented and
what remains to be addressed in the future
Deep Predictive Models for Collision Risk Assessment in Autonomous Driving
In this paper, we investigate a predictive approach for collision risk
assessment in autonomous and assisted driving. A deep predictive model is
trained to anticipate imminent accidents from traditional video streams. In
particular, the model learns to identify cues in RGB images that are predictive
of hazardous upcoming situations. In contrast to previous work, our approach
incorporates (a) temporal information during decision making, (b) multi-modal
information about the environment, as well as the proprioceptive state and
steering actions of the controlled vehicle, and (c) information about the
uncertainty inherent to the task. To this end, we discuss Deep Predictive
Models and present an implementation using a Bayesian Convolutional LSTM.
Experiments in a simple simulation environment show that the approach can learn
to predict impending accidents with reasonable accuracy, especially when
multiple cameras are used as input sources.Comment: 8 pages, 4 figure
Space Station Freedom data management system growth and evolution report
The Information Sciences Division at the NASA Ames Research Center has completed a 6-month study of portions of the Space Station Freedom Data Management System (DMS). This study looked at the present capabilities and future growth potential of the DMS, and the results are documented in this report. Issues have been raised that were discussed with the appropriate Johnson Space Center (JSC) management and Work Package-2 contractor organizations. Areas requiring additional study have been identified and suggestions for long-term upgrades have been proposed. This activity has allowed the Ames personnel to develop a rapport with the JSC civil service and contractor teams that does permit an independent check and balance technique for the DMS
- …