1,130 research outputs found
Power Allocation Strategies for Wireless Relay Networks with Analog Network Coding: Survey
Relay aided communication with network coding can bring spectacular performance enhancements for wireless networks. The proper design of power allocated to each of the nodes involved in the communication is essential as it has impact on the performance when Analog Network coding (ANC) is used. This paper presents a survey on recent power allocation strategies, intended objectives, practical constraints that have been considered, and corresponding performances for networks with ANC protocol
Distributed differential beamforming and power allocation for cooperative communication networks
Many coherent cooperative diversity techniques for wireless relay networks have recently been suggested to improve the overall system performance in terms of the achievable data rate or bit error rate (BER) with low decoding complexity and delay. However, these techniques require channel state information (CSI) at the transmitter side, at the receiver side, or at both sides. Therefore, due to the overhead associated with estimating CSI, distributed differential space-time coding techniques have been suggested to overcome this overhead by detecting the information symbols without requiring any (CSI) at any transmitting or receiving antenna. However, the latter techniques suffer from low performance in terms of BER as well as high latency and decoding complexity. In this paper, a distributed differential beamforming technique with power allocation is proposed to overcome all drawbacks associated with the later techniques without needing CSI at any antenna and to be used for cooperative communication networks. We prove through our analytical and simulation results that the proposed technique outperforms the state-of-the-art techniques in terms of BER with comparably low decoding complexity and latency
A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead
Physical layer security which safeguards data confidentiality based on the
information-theoretic approaches has received significant research interest
recently. The key idea behind physical layer security is to utilize the
intrinsic randomness of the transmission channel to guarantee the security in
physical layer. The evolution towards 5G wireless communications poses new
challenges for physical layer security research. This paper provides a latest
survey of the physical layer security research on various promising 5G
technologies, including physical layer security coding, massive multiple-input
multiple-output, millimeter wave communications, heterogeneous networks,
non-orthogonal multiple access, full duplex technology, etc. Technical
challenges which remain unresolved at the time of writing are summarized and
the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication
Full-duplex wireless communications: challenges, solutions and future research directions
The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication
Linear Precoders for Non-Regenerative Asymmetric Two-way Relaying in Cellular Systems
Two-way relaying (TWR) reduces the spectral-efficiency loss caused in
conventional half-duplex relaying. TWR is possible when two nodes exchange data
simultaneously through a relay. In cellular systems, data exchange between base
station (BS) and users is usually not simultaneous e.g., a user (TUE) has
uplink data to transmit during multiple access (MAC) phase, but does not have
downlink data to receive during broadcast (BC) phase. This non-simultaneous
data exchange will reduce TWR to spectrally-inefficient conventional
half-duplex relaying. With infrastructure relays, where multiple users
communicate through a relay, a new transmission protocol is proposed to recover
the spectral loss. The BC phase following the MAC phase of TUE is now used by
the relay to transmit downlink data to another user (RUE). RUE will not be able
to cancel the back-propagating interference. A structured precoder is designed
at the multi-antenna relay to cancel this interference. With multiple-input
multiple-output (MIMO) nodes, the proposed precoder also triangulates the
compound MAC and BC phase MIMO channels. The channel triangulation reduces the
weighted sum-rate optimization to power allocation problem, which is then cast
as a geometric program. Simulation results illustrate the effectiveness of the
proposed protocol over conventional solutions.Comment: 30 pages, 7 figures, submitted to IEEE Transactions on Wireless
Communication
Analog MIMO Radio-over-Copper: Prototype and Preliminary Experimental Results
Analog Multiple-Input Multiple-Output Radio-over-Copper (A-MIMO-RoC) is an
effective all-analog FrontHaul (FH) architecture that exploits any pre-existing
Local Area Network (LAN) cabling infrastructure of buildings to distribute
Radio-Frequency (RF) signals indoors. A-MIMO-RoC, by leveraging a fully analog
implementation, completely avoids any dedicated digital interface by using a
transparent end-to-end system, with consequent latency, bandwidth and cost
benefits. Usually, LAN cables are exploited mainly in the low-frequency
spectrum portion, mostly due to the moderate cable attenuation and crosstalk
among twisted-pairs. Unlike current systems based on LAN cables, the key
feature of the proposed platform is to exploit more efficiently the huge
bandwidth capability offered by LAN cables, that contain 4 twisted-pairs
reaching up to 500 MHz bandwidth/pair when the length is below 100 m. Several
works proposed numerical simulations that assert the feasibility of employing
LAN cables for indoor FH applications up to several hundreds of MHz, but an
A-MIMO-RoC experimental evaluation is still missing. Here, we present some
preliminary results obtained with an A-MIMO-RoC prototype made by low-cost
all-analog/all-passive devices along the signal path. This setup demonstrates
experimentally the feasibility of the proposed analog relaying of MIMO RF
signals over LAN cables up to 400 MHz, thus enabling an efficient exploitation
of the LAN cables transport capabilities for 5G indoor applications.Comment: Part of this work has been accepted as a conference publication to
ISWCS 201
- …