188,376 research outputs found
Amplified singlet oxygen generation in metallated-porphyrin doped conjugated polymer nanoparticles
We report on the mechanism and efficiencies of singlet oxygen O2(1Δg) generation of nanoparticles (NP) of the conjugated polymer (CP) poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) doped with platinum octaethylporphyrin (PtOEP) suspended in water. A detailed study of the photophysics of these NP, using stationary and time-resolved absorption and emission techniques, indicates that O2(1Δg) is generated by the triplet excited state of F8BT and not by that of PtOEP, as previously observed for other porphyrin doped CP NP. O2(1Δg) quantum yields (ΦΔ) were measured by quantifying the characteristic phosphorescence of O2(1Δg) in the NIR region (∼1268 nm). It was found that incorporation of relatively small amounts of PtOEP to F8BT NP results in a significant increase of ΦΔ. NP containing 10% PtOEP (w/w) show a ΦΔ ∼ 0.24, which is 3 times larger than that observed for undoped F8BT NP, and larger than the reported for most water-soluble porphyrins. ΦΔ were also calculated from the oxidation rates (v0) of 3-[10-(2-carboxyethyl)anthracen-9-yl]propanoic acid (ADPA), a well-known chemical O2(1Δg) trap. Unexpectedly, this method was found to significantly overestimate the ΦΔ values due to the adsorption of ADPA on the surface of NP. The ADPA/NP adsorption process was characterized using a simple adsorption model yielding an (average) equilibrium constant of ∼8 × 103 M−1 and an (average) number of NP-binding sites of ∼14000. These results necessarily caution about the use of ADPA as a probe to evaluate ΦΔ in these NP systems. In addition, the interaction of F8BT NP with other anionic, cationic and zwitterionic dyes (dissolved in water) was studied. It was found that even at nano-molar concentrations all the dyes efficiently adsorb on the NP surface. This general and simple self-assembly strategy can be used to prepare superficially-dye-doped CP NP with potentially interesting technological applications.Fil: Spada, Ramiro Martín. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; ArgentinaFil: Macor, Lorena Paola. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Hernández, Laura. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Ponzio, Rodrigo Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; ArgentinaFil: Ibarra, Luis Exequiel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Biología Molecular; ArgentinaFil: Lorente, Carolina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Chesta, Carlos Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; ArgentinaFil: Palacios, Rodrigo Emiliano. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Departamento de Química; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin
Anatase TiO Nanowires Functionalized by Organic Sensitizers for Solar Cells : A Screened Coulomb Hybrid Density Functional Study
The adsorption of two different organic molecules cyanidin glucoside
(COH) and TA-St-CA on anatase (101) and (001) nanowires
have been investigated using the standard and the range separated hybrid
density functional theory calculations. The electronic structures and optical
spectra of resulting dye--nanowire combined systems show distinct features for
these types of photochromophores. The lowest unoccupied molecular orbital of
the natural dye cyanidin glucoside is located below the conduction band of the
semiconductor while, in the case of TA-St-CA, it resonates with the states
inside the conduction band. The wide-bandgap anatase nanowires can be
functionalized for solar cells through electron-hole generation and subsequent
charge injection by these dye sensitizers. The intermolecular charge transfer
character of Donor--Acceptor type dye TA-St-CA is substantially modified
by its adsorption on TiO surfaces. Cyanidin glucoside exhibits relatively
stronger anchoring on the nanowires through its hydroxyl groups. The atomic
structures of dye--nanowire systems re-optimized with the inclusion of
nonlinear solvation effects showed that the binding strengths of both dyes
remain moderate even in ionic solutions.Comment: 11 pages, 6 figure
Influence of CH(OH) isomers on water disinfection by photocatalysis: a computational study
Solar disinfection by photocatalysis is one of the promising methods used for
drinking water disinfection. It leads to the destruction of bacteria like
( ). In this paper, we compare our theoretical
results with experimental ones done previously by A.G. Rinc\'on and his
colleagues concerning the order of decay of CH(OH) isomers in
the presence of titanium dioxide TiO, and show the influence of optical
properties of those molecules on inactivation. According to the
adsorption energy parameter, we find that catechol has the highest adsorption
degree on titanium dioxide, followed by resorcinol, and finally hydroquinone.
Three dihydroxybenzene isomers absorb photons belonging to ultraviolet (UV)
range. The lowest absorption energies of resorcinol, catechol and hydroquinone
are respectively 3.42, 4.44 and 4.49 eV.Comment: 7 pages, 3 figures, 1 tabl
Highlight on the problems generated by p-coumaric acid analysis in fermentations
p-Coumaric acid is a natural hydroxycinnamic acid existing in grapes and wine. It is the precursor of the 4-ethylphenol molecule through the bioconversion reaction by Brettanomyces yeast. Chromatographic methods are the most common techniques to detect p-coumaric acid. It is known that this acid is highly unstable in analysis and fermentation experiments. This paper highlights the problems occurring in p-coumaric acid analysis in wine fermentation conditions when studying its bioconversion. First, it was shown that p-coumaric acid was unstable at elevated temperature. On the other hand, it was found that in our experimental conditions p-coumaric acid reacted with ethanol. This work revealed also that the p-coumaric acid is partially adsorbed on Brettanomyces yeast, certainly on cell walls. Because of these phenomena the quantity of p-coumaric acid which can participate to the bioconversion into ethylphenol decreases
Brain delivery of vasoactive intestinal peptide (VIP) following nasal administration to rats
The aim of this work was to study in rats the nasal route for the brain delivery of the vasoactive intestinal peptide (VIP) neuropeptide. After evaluating VIP stability in solutions obtained from nasal washes, the effect of formulation parameters (pH 4-9, 0-1% (w/v) lauroylcarnitine (LC), hypo- or isoosmolality) on the brain uptake of intranasally administered VIP (10(-8)M)/125I-VIP (300,000 cpm/ml) was studied, using an in situ perfusion technique. Brain radioactivity distribution was assessed by quantitative autoradiographic analysis. Results were compared to intravenously administered VIP. With a hypotonic formulation at pH 4 containing 0.1% LC and 1% bovine serum albumin, VIP stability was satisfactory and loss by adsorption was minimal. Using this formulation, around 0.11% of initial radioactivity was found in the brain after 30 min perfusion and was located in the olfactory bulbs, the midbrain and the cerebellum. HPLC analysis of brain and blood extracts demonstrated the presence of intact VIP in brain and its complete degradation in the blood compartment. By intravenous administration, no intact VIP was found either in brain or in blood. In conclusion, intact VIP could be delivered successfully to the brain using the intranasal route for administration
A Gel Probe Equilibrium Sampler for Measuring Arsenic Porewater Profiles and Sorption Gradients in Sediments: I. Laboratory Development
A gel probe equilibrium sampler has been developed to study arsenic (As) geochemistry and sorption behavior in sediment porewater. The gels consist of a hydrated polyacrylamide polymer, which has a 92% water content. Two types of gels were used in this study. Undoped (clear) gels were used to measure concentrations of As and other elements in sediment porewater. The polyacrylamide gel was also doped with hydrous ferric oxide (HFO), an amorphous iron (Fe) oxyhydroxide. When deployed in the field, HFO-doped gels introduce a fresh sorbent into the subsurface thus allowing assessment of in situ sorption. In this study, clear and HFO-doped gels were tested under laboratory conditions to constrain the gel behavior prior to field deployment. Both types of gels were allowed to equilibrate with solutions of varying composition and re-equilibrated in acid for analysis. Clear gels accurately measured solution concentrations (±1%), and As was completely recovered from HFO-doped gels (±4%). Arsenic speciation was determined in clear gels through chromatographic separation of the re-equilibrated solution. For comparison to speciation in solution, mixtures of As(III) and As(V) adsorbed on HFO embedded in gel were measured in situ using X-ray absorption spectroscopy (XAS). Sorption densities for As(III) and As(V) on HFO embedded in gel were obtained from sorption isotherms at pH 7.1. When As and phosphate were simultaneously equilibrated (in up to 50-fold excess of As) with HFO-doped gels, phosphate inhibited As sorption by up to 85% and had a stronger inhibitory effect on As(V) than As(III). Natural organic matter (>200 ppm) decreased As adsorption by up to 50%, and had similar effects on As(V) and As(III). The laboratory results provide a basis for interpreting results obtained by deploying the gel probe in the field and elucidating the mechanisms controlling As partitioning between solid and dissolved phases in the environment
Carbon storage and DNA absorption in allophanic soils and paleosols
Andisols and andic paleosols dominated by the nanocrystalline mineral allophane sequester large amounts of carbon (C), attributable mainly to its chemical bonding with charged hydroxyl groups on the surface of allophane together with its physical protection in nanopores within and between allophane nanoaggregates. C near-edge X-ray absorption fine structure (NEXAFS) spectra for a New Zealand Andisol (Tirau series) showed that the organic matter (OM) mainly comprises quinonic, aromatic, aliphatic, and carboxylic C. In different buried horizons from several other Andisols, C contents varied but the C species were similar, attributable to pedogenic processes operating during developmental upbuilding, downward leaching, or both. The presence of OM in natural allophanic soils weakened the adsorption of DNA on clay; an adsorption isotherm experiment involving humic acid (HA) showed that HA-free synthetic allophane adsorbed seven times more DNA than HA-rich synthetic allophane. Phosphorus X-ray absorption near-edge structure (XANES) spectra for salmonsperm DNA and DNA-clay complexes indicated that DNA was bound to the allophane clay through the phosphate group, but it is not clear if DNA was chemically bound to the surface of the allophane or to OM, or both. We plan more experiments to investigate interactions among DNA, allophane (natural and synthetic), and OM. Because DNA shows a high affinity to allophane, we are studying the potential to reconstruct late Quaternary palaeoenvironments by attempting to extract and characterise ancient DNA from allophanic paleosol
Mass transfer in gas-liquid slurry reactors
A critical review is presented on the mass transfer characteristics of gas¿liquid slurry reactors. The recent findings on the influence of the presence of solid particles on the following mass transfer parameters in slurry reactors are discussed: volumetric gas¿liquid mass transfer coefficients (kLa, kGa), liquid-side mass transfer coefficients (kL and kS) and specific gas¿slurry contact area (a). The second part of this paper reviews the recent progress in our knowledge and understanding of the enhancement of gas¿slurry mass transfer due to the presence of solids. Five different cases are distinguished, i.e. \ud
\ud
¿ enhanced mass transfer by physical adsorption on small particles.\ud
\ud
¿ enhanced mass transfer by fast homogeneous reactions in the slurry, due to inert particles,\ud
\ud
¿ enhanced mass transfer by homogenous reaction in the liquid with dissolving particles,\ud
\ud
¿ enhanced mass transfer due to reactive particles and\ud
\ud
¿ enhanced mass transfer due to catalytic particles in heterogeneous reactive systems.\ud
\ud
Prospective areas for additional research are identified
- …
