TRIPILLAR: Miniature magnetic caterpillar climbing robot with plane transition ability

In this paper, we describe a miniature climbing robot, 96 x 46 x 64 [mm3], able to climb ferromagnetic surfaces and to make inner plane to plane transition using only two degrees of freedom. Our robot, named TRIPILLAR, combines magnetic caterpillars and magnets to climb planar ferromagnetic surfaces. Two triangular tracks are mounted in a differential drive mode, which allows squid steering and on spot turning. Exploiting the particular geometry and magnetic properties of this arrangement, TRIPILLAR is able to transit between intersecting surfaces. The intersection angle ranges from -10° to 90° on the pitch angle of the coordinate system of the robot regardless of the orientation of gravity. A possible path is to move from ground to ceiling and back. This achievement opens new avenues for mobile robotics inspection of ferromagnetic industrial structure with stringent size restriction, like the one encountered in power plants

A controllably adhesive climbing robot using magnetorheological fluid

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 67-69).In this thesis, the novel adhesive effects of magnetorheological fluid for use in climbing robotics were experimentally measured and compared to existing cohesive failure fluid models of yield stress adhesion. These models were found to correlate with experimental results at yield stresses below 1.12 kPa. MR fluid samples activated to have yield stresses above 1.12 kPa were limited to an adhesive stress of approximately 25-30 kPa regardless of inital fluid thickness or yield stress. A climbing robot capable of utilizing MR fluid adhesion was constructed and shown to be capable of adhering to surfaces of any orientation and climbing rough surfaces with a 45° slope. The robot was capable of controllably adhering to rough sandpaper and smooth glass with an adhesive stress of 7.3 kPa, demonstrating a novel form of adhesion on a wide range of surface roughnesses and orientations.by Nicholas Eric Wiltsie.S.M

The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and logistics. Such methodologies are expected to lead practitioners and decision-makers, in particular safety professionals and companies, in the management of occupational safety. In particular, this research focuses on the integration and application of ergonomics principles to reduce biomechanical overload of manual work, and methodologies and solutions to improve safety of confined space work in industrial plants. The study of biomechanical overload due to manual handling of loads and awkward postures is the object of several researches and publications addressing the ergonomic risk assessment and the ergonomic approach to remove or reduce the risk of manual handling injuries and disorders. Furthermore, when awkward postures are assumed in high-risk workplaces as confined spaces, the overall risk of work is extremely high. Confined space work is a high-risk activity, posing a significant hazard for both workers and rescuers involved in the emergency response. The leading cause of accidents and fatalities in confined spaces is atmospheric condition (Sahli & Armstrong 1992, Harris et al. 2005, Flynn & Susi, 2010, Meeker, Susi & Flynn 2010, Ye 2011, Bellamy 2015). Further common causes are fire, explosion, ignition of flammable contaminants, spontaneous combustion and contact with temperature extremes. Besides, work activities in confined spaces (e.g., welding and maintenance tasks) frequently require awkward and static postures, at high temperatures. This thesis stresses the importance of implementing health and safety interventions at workplace. These interventions have impact not only on enterprise level but also on individual and social levels. Furthermore, protection of human life is a matter of human rights and human life has an invaluable value. In this thesis, the role of occupational safety and safety strategy as means for the improvement of workers and companies’ performances clearly emerges. Two parallel research fields on occupational safety are investigated: ergonomics and confined spaces. Selected data are introduced related to occupational accidents and diseases due to biomechanical overload and work in confined spaces. The literature survey on controls for risk elimination and reduction shows that technology for safety is available. Nevertheless, injuries and accidents still occur, i.e. safety is frequently considered an expensive investment and a compliance obligation. Specifically, administrative and engineering controls for risk elimination and reduction are introduced for each research field. Administrative controls include work procedures and mathematical models for the design of safe work processes. Such control methods reduce the workers' exposure to occupational risk factors. The ergonomic analysis of manual handling activities drives the modelling by multi-objective optimisation problems in the design of administrative controls for the ergonomic risk reduction in different industries. Administrative controls for risks in confined spaces include work procedures, a multi-criteria decision tool and the analysis of the requirements of Internet of Things (IOT) technologies for reducing the risk of confined space work. The introduction of automation to replace manual work and engineering controls for confined space work are analysed for the risk elimination. Results show that the integration of ergonomics and safety principles in the industrial processes plays a leading role in the successful implementation of the overall strategy. Technologies for safe confined space work and technical solutions assisting workers during manual material handling tasks have been the focus of the Solutions Database Project, funded by the Azienda Unità Sanitaria Locale of Bologna (AUSL), Italy. The study of such technological and technical solutions lead to the development of the Solutions Database, a free access database available online for researchers and practitioners (http://safetyengineering.din.unibo.it/en/banca-delle-soluzioni). The thesis ends with the recommendation that companies should integrate workplace health and safety principles to human resource management and work organisation. The management of health and safety issues should be considered to be crucial for workplace development, as a lever to increase performance and productivity. Finally, this research aims to support and reinforce the evolution of the concept of safety in industry, from ex post required obligation, to ex ante optimisation strategy

NASA/ASEE Summer Faculty Fellowship Program

This document is a collection of technical reports on research conducted by the participants in the 1992 NASA/ASEE Summer Faculty Fellowship Program at Kennedy Space Center (KSC). This was the eighth year that a NASA/ASEE program has been conducted at KSC. The 1992 program was administered by the University of Central Florida in cooperation with KSC. The program was operated under the auspices of the American Society for Engineering Education (ASEE) with sponsorship and funding from the Office of Educational Affairs, NASA Headquarters, Washington, D.C. The KSC program was one of nine such Aeronautics and Space Research Programs funded by NASA Headquarters in 1992. The basic common objectives are to further the professional knowledge, to stimulate an exchange of ideas, to enrich and refresh the research and teaching activities, and to contribute to the research objectives of the NASA centers

KEER2022

Avanttítol: KEER2022. DiversitiesDescripció del recurs: 25 juliol 202

The Art of Movies

Movie is considered to be an important art form; films entertain, educate, enlighten and inspire audiences. Film is a term that encompasses motion pictures as individual projects, as well as — in metonymy — the field in general. The origin of the name comes from the fact that photographic film (also called filmstock) has historically been the primary medium for recording and displaying motion pictures. Many other terms exist — motion pictures (or just pictures or “picture”), the silver screen, photoplays, the cinema, picture shows, flicks — and commonly movies

Major Total Conversion in English: The Question of Directionality

This research investigates the directionality of major total conversion in English, where major total conversion is defined as the process and at the same time as the result of deriving a new lexical item by altering the part of speech of the base without marking the alteration overtly, as in the presumed pair dry – to dry. The question is whether there is a reliable strategy for deciding which member of a pair is the base and which member is the converted counterpart. Various attempts had been made to resolve the controversial directional issue, but the results have been inconsistent. The investigation aims to discover whether or not there exists a coherent notion about how to decide directionality by considering four factors assumed in the literature to reflect directionality. A large corpus of potential examples of major total conversion was collected to act as test materials. The four factors were compared for each major total conversion pair to see to what extent there was agreement among them. Results showed the factors did not agree to the expected extent. The findings are discussed in detail and it is claimed the inconsistencies can often be explained with recourse to a few general principles. In conclusion, on the whole the four factors considered are consistent with one another. In other words, the notion about how to determine directionality in major total conversion is coherent and can be maintained for English