2,315 research outputs found
Soliton dual comb in crystalline microresonators
We present a novel compact dual-comb source based on a monolithic optical
crystalline MgF multi-resonator stack. The coherent soliton combs generated
in two microresonators of the stack with the repetition rate of 12.1 GHz and
difference of 1.62 MHz provided after heterodyning a 300 MHz wide
radio-frequency comb. Analogous system can be used for dual-comb spectroscopy,
coherent LIDAR applications and massively parallel optical communications.Comment: 5 pages, 5 figure
Ultrafast electrooptic dual-comb interferometry
The femtosecond laser frequency comb has enabled the 21st century revolution
in optical synthesis and metrology. A particularly compelling technique that
relies on the broadband coherence of two laser frequency combs is dual-comb
interferometry. This method is rapidly advancing the field of optical
spectroscopy and empowering new applications, from nonlinear microscopy to
laser ranging. Up to now, most dual-comb interferometers were based on
modelocked lasers, whose repetition rates have restricted the measurement speed
to ~ kHz. Here we demonstrate a novel dual-comb interferometer that is based on
electrooptic frequency comb technology and measures consecutive complex spectra
at a record-high refresh rate of 25 MHz. These results pave the way for novel
scientific and metrology applications of frequency comb generators beyond the
realm of molecular spectroscopy, where the measurement of ultrabroadband
waveforms is of paramount relevance
Fast Characterization of Dispersion and Dispersion Slope of Optical Fiber Links using Spectral Interferometry with Frequency Combs
We demonstrate fast characterization (~1.4 microseconds) of both the
dispersion and dispersion slope of long optical fiber links (~25 km) using dual
quadrature spectral interferometry with an optical frequency comb. Compared to
previous spectral interferometry experiments limited to fiber lengths of
meters, the long coherence length and the periodic delay properties of
frequency combs, coupled with fast data acquisition, enable spectral
interferometric characterization of fibers longer by several orders of
magnitude. We expect that our method will be useful to recently proposed
lightwave techniques like coherent WDM and to coherent modulation formats by
providing a real time monitoring capability for the link dispersion. Another
area of application would be in stabilization of systems which perform
frequency and timing distribution over long fiber links using stabilized
optical frequency combs.Comment: 3 pages, 3 figures, Minor changes to tex
Low Noise, Narrow Optical Linewidth Semiconductor-based Optical Comb Source And Low Noise Rf Signal Generation
Recently optical frequency combs and low noise RF tones are drawing increased attention due to applications in spectroscopy, metrology, arbitrary waveform generation, optical signal processing etc. This thesis focuses on the generation of low noise RF tones and stabilized optical frequency combs. The optical frequency combs are generated by a semiconductor based external cavity mode-locked laser with a high finesse intracavity etalon. In order to get the lowest noise and broadest bandwidth from the mode-locked laser, it is critical to know the free spectral range (FSR) of the etalon precisely. First the etalon FSR is measured by using the modified Pound-Drever-Hall (PDH) based method and obtained a resolution of 1 part in 106 , which is 2 order of magnitude better than the standard PDH based method. After optimizing the cavity length, RF driving frequency and PDH cavity locking point, the mode-locked laser had an integrated timing jitter of 3 fs (1 Hz- 100 MHz) which is, to the best of our knowledge, the lowest jitter ever reported from a semiconductor based multigigahertz comb source. The modelocked laser produces ~ 100 comb lines with 10 GHz spacing, a linewidth of ~500 Hz and 75 dB optical signal-to-noise ratio. The same system can also be driven as a regeneratively modelocked laser with greatly improved noise performance. Another way of generating a low noise RF tone is using an opto-electronic oscillator which uses an optical cavity as a high Q element. Due to the harmonic nature of OEOs, a mode selection element is necessary. Standard OEOs use an RF filter having drawbacks such as broad pass band, high loss, and high thermal noise. In our work, a novel optoelectronic scheme which uses an optical filter (Fabry-Perot etalon) as the mode filter instead of an RF filter is demonstrated. This method has the advantage of having ultra-narrow filtering bandwidths ( ~ 10 iv kHz for a 10 GHz FSR and 106 finesse) and an extremely low noise RF signal. Experimental demonstration of the proposed method resulted in a 5-10 dB decrease of the OEO noise compared to the conventional OEO setup. Also, by modifying the etalon-based OEO, and using single side band modulation, an optically tunable optoelectronic oscillator is achieved with 10-20 dB lower noise than dual side band modulation. Noise properties of the OEO as a function of optical frequency detuning is also analyzed theoretically and the results are in agreement with experimental results. The thesis concludes with comments on future work and directions
Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
By continuous wave pumping of a dispersion engineered, planar silicon nitride
microresonator, continuously circulating, sub-30fs short temporal dissipative
solitons are generated, that correspond to pulses of 6 optical cycles and
constitute a coherent optical frequency comb in the spectral domain. Emission
of soliton induced Cherenkov radiation caused by higher order dispersion
broadens the spectral bandwidth to 2/3 of an octave, sufficient for self
referencing, in excellent agreement with recent theoretical predictions and the
broadest coherent microresonator frequency comb generated to date. In a further
step, this frequency comb is fully phase stabilized. The ability to preserve
coherence over a broad spectral bandwidth using soliton induced Cherenkov
radiation marks a critical milestone in the development of planar optical
frequency combs, enabling on one hand application in e.g. coherent
communications, broadband dual comb spectroscopy and Raman spectral imaging,
while on the other hand significantly relaxing dispersion requirements for
broadband microresonator frequency combs and providing a path for their
generation in the visible and UV. Our results underscore the utility and
effectiveness of planar microresonator frequency comb technology, that offers
the potential to make frequency metrology accessible beyond specialized
laboratories.Comment: Changes: - Added data (new Fig.4) on the first full phase
stabilization of a dissipative Kerr soliton (or dissipative cavity soliton)
in a microresonator - Extended Fig. 8 in the SI - Introduced nomenclature of
dissipative Kerr solitons - Minor other change
- …