High-Speed 64-Bit CMOS Binary Comparator

High-speed 64-bit CMOS binary comparator is proposed in this brief. Comparison is most basic arithmetic operation that determines if one number is greater than, equal to, or less than the other number. Comparator is most fundamental component that performs comparison operation. This brief presents comparison of modified and existing 64-bit binary comparator designs concentrating on delay. Means some modifications are done in existing 64-bit binary comparator design to improve the speed of the circuit. Comparison between modified and existing 64-bit binary comparator designs is calculated by simulation that is performed at 90nm technology in Tanner EDA Tool. Keywords: Binary comparator, digital arithmetic, high-speed

16-bit Digital Adder Design in 250nm and 64-bit Digital Comparator Design in 90nm CMOS Technologies

High speed, low power, and area efficient adders and comparators continue to play a key role in hardware implementation of digital signal processing applications. Adders based on Complimentary Pass Transistor Logic (CPL) are power and area efficient, but are slower compared to Square Root Carry Select (SQRT-CS) based adders. This thesis demonstrates a unique custom designed 16-bit adder in 250-nm CMOS technology to obtain fast and power/area efficient features by combining CPL and CS logic. Comparing the results obtained for proposed 16-bit Linear CPL/CS adder with the BEC (Binary Excess-1 Code) based low power SQRT-CS adder, the delay is reduced by approximately one thirds, power is reduced by 19.2%, and the number of transistors is reduced by 23.4%. Also, new tree-based 64-bit static and dynamic digital comparators are presented in this thesis to perform high speed and low power operations. This tree-based architecture combines a new approach of designing dynamic comparator using a low duty cycle clock to reduce the short circuit power consumption in pre-charge (or pre-discharge) mode. This work also introduces a new sizing strategy and load balancing techniques to improve self-pipelining tendency of a tree based design. A resource sharing technique is also integrated in both static and dynamic comparator designs. At 1.2V power supply in CMOS 90nm technology, worst path delay and worst power are 374ps and 822µW, respectively for low cost static design with 1244 (768+476) transistors in total. 768 transistors are used for resource sharing. The proposed full and partially dynamic designs show superior power efficiency compared to recent state of art designs. The worst power consumptions at 5GHz and 25% (50ps) duty cycle clock for the 64-bit full and partially dynamic comparator designs are 5.00mW and 2.78mW, respectively. 769 (320+449) transistors includes 320 transistors for resource sharing, and 1217 (768+449) includes 768 transistors for resource sharing for full and partial dynamic comparators, respectively

A mux-based high-performance single-cycle CMOS comparator

In this brief, a new architecture for high-fan-in CMOS comparator is proposed. The architecture is based on a hierarchical two-stage comparator structure and a dynamic MUXx is used instead of a comparator in the second stage of the structure. By doing so, the fast dynamic MUX significantly improves the overall delay of the high-fan-in comparators. At the same time, a novel high-performance static priority encoder is proposed to generate the control signal for the MUX. A 64-bit MUX-based comparator has been built and compared with the existing fastest single-cycle design in the study by Lam and Tsui (2006). From both the post-layout simulation and test-chip measurement results, it is shown that the performance is improved by around 28\%

High-Performance, Energy-Efficient CMOS Arithmetic Circuits

In a modern microprocessor, datapath/arithmetic circuits have always been an important building block in delivering high-performance, energy-efficient computing, because arithmetic operations such as addition and binary number comparison are two of the most commonly used computing instructions. Besides the manufacturing CMOS process, the two most critical design considerations for arithmetic circuits are the logic style and micro-architecture. In this thesis, a constant-delay (CD) logic style is proposed targeting full-custom high-speed applications. The constant delay characteristic of this logic style (regardless of the logic type) makes it suitable for implementing complicated logic expressions such as addition. CD logic exhibits a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. This feature enables a performance advantage over static and dynamic domino logic styles in a single cycle, multi-stage circuit block. Several design considerations including timing window width adjustment and clock distribution are discussed. Using a 65-nm general-purpose CMOS technology, the proposed logic style demonstrates an average speedup of 94% and 56% over static and dynamic domino logic, respectively, in five different logic gates. Simulation results of 8-bit ripple carry adders conclude that CD logic is 39% and 23% faster than the static and dynamic-based adders, respectively. CD logic also demonstrates 39% speedup and 64% (22%) energy-delay product reduction from static logic at 100% (10%) data activity in 32-bit carry lookahead adders. To confirm CD logic's potential, a 148 ps, single-cycle 64-bit adder with CD logic implemented in the critical path is fabricated in a 65-nm, 1-V CMOS process. A new 64-bit Ling adder micro-architecture, which utilizes both inversion and absorption properties to minimize the number of CD logic and the number of logic stage in the critical path, is also proposed. At 1-V supply, this adder's measured worst-case power and leakage power are 135 mW and 0.22 mW, respectively. A single-cycle 64-bit binary comparator utilizing a radix-2 tree structure is also proposed. This comparator architecture is specifically designed for static logic to achieve both low-power and high-performance operation, especially in low input data activity environments. At 65-nm technology with 25% (10%) data activity, the proposed design demonstrates 2.3x (3.5x) and 3.7x (5.8x) power and energy-delay product efficiency, respectively. This comparator is also 2.7x faster at iso-energy (80 fJ) or 3.3x more energy-efficient at iso-delay (200 ps) than existing designs. An improved comparator, where CD logic is utilized in the critical path to achieve high performance without sacrificing the overall energy efficiency, is also realized in a 65-nm 1-V CMOS process. At 1-V supply, the proposed comparator's measured delay is 167 ps, and has an average power and a leakage power of 2.34 mW and 0.06 mW, respectively. At 0.3-pJ iso-energy or 250-ps iso-delay budget, the proposed comparator with CD logic is 20% faster or 17% more energy-efficient compared to a comparator implemented with just the static logic