Energy-Efficient NoC for Best-Effort Communication

A Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture forMulti-Processor System-on-Chip (MPSoC) architectures. In an earlier paper we proposed a energy-efficient reconfigurable circuit-switched NoC to reduce the energy consumption compared to a packetswitched NoC. In this paper we investigate a chordal slotted ring and a bus architecture that can be used to handle the best-effort traffic in the system and configure the circuitswitched network. Both architectures are compared on their latency behavior and power consumption. At the same clock frequency, the chordal ring has the major benefit of a lower latency and higher throughput. But the bus has a lower overall power consumption at the same frequency. However, if we tune the frequency of the network to meet the throughput requirements of control network, we see that the ring consumes less energy per transported bit

Load Based Dynamic Priority Arbiter for NoC Architecture

495-504The evolution of Very Large Scale Integration (VLSI) and the semiconductor industry have led to the focus on multicore architectures. Network on Chip (NoC) is one of such arrangement which is an interconnection framework comprised of cores, routers, and links. The output port for each request from the input port must be computed, and the output channel must be reserved for the next router. However, the same output port can be requested by more than one input port, but only one request can be granted at a time. Multiple requests for a single output channel will lead to congestion of the packets, thereby increasing the network latency and leading to packet losses. The arbiter selects any one of the input ports and grants permission to use the requested output port while putting the other input port requests to wait. For a congestion-free traversal of packets and to avoid dropping of packets, a Load based Dynamic Priority Arbiter (LDPA) with dynamically changing priorities during run time based on the input port load has been proposed. The proposed customized arbiter LDPA works based on the updates made in the reservations of each input port. The priority of each input port is given according to the average load. More weight is allotted to the highly loaded input ports. By randomization, the chance is given to the lower priority input ports to reduce starvation and hence latency. With the use of the proposed LDPA, the average network latency is reduced by about 15.98% when compared to that of baseline FIFO arbiter, without any compromise in power and throughput

CLOCK GATED ROUND ROBIN ARBITER FOR NOC ROUTER

Network on chip is now a day the choice of a processor designer for transfer of data in a packet based communication system as conventional bus based communication medium is not scalable with the increasing numbers of cores. In an NoC system, each core is connected to a local router and all the routers are connected via communication links. The routers as well as the communication links consume a significant amount of power which is a major concern in an NoC based system. This has led to the work that has been proposed in this paper. In this paper, we propose a low power NoC router based on the principle of clock gating technique by modifying the arbiter block of the router and compare the result with conventional Round-Robin arbiter. Here, the concept of clock-gating has been used to modify the router which has led to the reduction of dynamic power

Design Approach to Implementation Of Arbitration Algorithm In Shared Bus Architectures (MPSoC)

The multiprocessor SoC designs have more than one processor and huge memory on the same chip. SoC consists of hardware cores and software cores ,multiple processors, embedded DRAM and connectors between cores .A wide range of MPSOC architectures have been developed over the past decade. This paper surveys the history of various On-Chip communication architectures present in the design of MPSoC. This acts as a primary factor of overall performance in complex SoC designs. Some of the various techniques that have driven the design of MpSoC has been discussed. Dynamically configurable communication architectures are found to improve the system performance. Currently On-chip interconnection networks are mostly implemented using shared buses which are the most common medium. The arbitration plays a crucial role in determining performance of bus-based system, as it assigns priorities, with which processor is granted the access to the shared communication resources. In the conventional arbitration algorithms there are some drawbacks such as bus starvation problem and low system performance. The bus should provide each component a flexible and utmost share of on-chip communication bandwidth and should improve the latency in access of the shared bus. The performance of SoC is improved using the probabilistic round robin algorithm with regard to the parameters, latency.Thus in this paper various issues related to bus arbitration related to design of MPSoC is analysed

The Octopus switch

This chapter1 discusses the interconnection architecture of the Mobile Digital Companion. The approach to build a low-power handheld multimedia computer presented here is to have autonomous, reconfigurable modules such as network, video and audio devices, interconnected by a switch rather than by a bus, and to offload as much as work as possible from the CPU to programmable modules placed in the data streams. Thus, communication between components is not broadcast over a bus but delivered exactly where it is needed, work is carried out where the data passes through, bypassing the memory. The amount of buffering is minimised, and if it is required at all, it is placed right on the data path, where it is needed. A reconfigurable internal communication network switch called Octopus exploits locality of reference and eliminates wasteful data copies. The switch is implemented as a simplified ATM switch and provides Quality of Service guarantees and enough bandwidth for multimedia applications. We have built a testbed of the architecture, of which we will present performance and energy consumption characteristics

Round Robin based Arbitration Mechanism for Signaling Approach based Router Architecture

In Network-on-Chip the effectiveness of the network resource allocation is demonstrated by the flow control mechanism. There are two types of flow control mechanisms: buffered and bufferless. Compared to buffered flow control methods, buffer less flow control mechanisms are easier to use, need less power, and take up less space. When there are congestion and resource conflicts, it experiences higher packet loss and packet misrouting inside the network. A good buffered control mechanism useful as it overcomes the limitations of buffer less mechanism. There are numerous buffered and bufferless flow control methods available. In this paper, signaling-based Virtual Output Queue Router Arbiter Mechanism is used to explore credit-based flow control. This mechanism worked on new concept that is “stress value”. This information is generated in the form of credit whenever any input buffer has free space. Then, using this credit data, the node's stress value is determined. Free buffer space takes precedence over stress value if it is bigger. The stress value will increase if there is less available buffer space. To handle the congestion problem, the signaling block then sends this stress value to a neighboring router. To help the arbitrator make a more accurate decision, the crediting system constantly operates in tandem with arbitration

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.Siirretty Doriast