RF Power Transfer, Energy Harvesting, and Power Management Strategies

Energy harvesting is the way to capture green energy. This can be thought of as a recycling process where energy is converted from one form (here, non-electrical) to another (here, electrical). This is done on the large energy scale as well as low energy scale. The former can enable sustainable operation of facilities, while the latter can have a significant impact on the problems of energy constrained portable applications. Different energy sources can be complementary to one another and combining multiple-source is of great importance. In particular, RF energy harvesting is a natural choice for the portable applications. There are many advantages, such as cordless operation and light-weight. Moreover, the needed infra-structure can possibly be incorporated with wearable and portable devices. RF energy harvesting is an enabling key player for Internet of Things technology. The RF energy harvesting systems consist of external antennas, LC matching networks, RF rectifiers for ac to dc conversion, and sometimes power management. Moreover, combining different energy harvesting sources is essential for robustness and sustainability. Wireless power transfer has recently been applied for battery charging of portable devices. This charging process impacts the daily experience of every human who uses electronic applications. Instead of having many types of cumbersome cords and many different standards while the users are responsible to connect periodically to ac outlets, the new approach is to have the transmitters ready in the near region and can transfer power wirelessly to the devices whenever needed. Wireless power transfer consists of a dc to ac conversion transmitter, coupled inductors between transmitter and receiver, and an ac to dc conversion receiver. Alternative far field operation is still tested for health issues. So, the focus in this study is on near field. The goals of this study are to investigate the possibilities of RF energy harvesting from various sources in the far field, dc energy combining, wireless power transfer in the near field, the underlying power management strategies, and the integration on silicon. This integration is the ultimate goal for cheap solutions to enable the technology for broader use. All systems were designed, implemented and tested to demonstrate proof-of concept prototypes

Low Power Circuit Design in Sustainable Self Powered Systems for IoT Applications

The Internet-of-Things (IoT) network is being vigorously pushed forward from many fronts in diverse research communities. Many problems are still there to be solved, and challenges are found among its many levels of abstraction. In this thesis we give an overview of recent developments in circuit design for ultra-low power transceivers and energy harvesting management units for the IoT. The first part of the dissertation conducts a study of energy harvesting interfaces and optimizing power extraction, followed by power management for energy storage and supply regulation. we give an overview of the recent developments in circuit design for ultra-low power management units, focusing mainly in the architectures and techniques required for energy harvesting from multiple heterogeneous sources. Three projects are presented in this area to reach a solution that provides reliable continuous operation for IoT sensor nodes in the presence of one or more natural energy sources to harvest from. The second part focuses on wireless transmission, To reduce the power consumption and boost the Tx energy efficiency, a novel delay cell exploiting current reuse is used in a ring-oscillator employed as the local oscillator generator scheme. In combination with an edge-combiner power amplifier, the Tx showed a measured energy efficiency of 0.2 nJ=bit and a normalized energy efficiency of 3.1 nJ=bit:mW when operating at output power levels up to -10 dBm and data rates of 3 Mbps

Millimeter-Scale and Energy-Efficient RF Wireless System

This dissertation focuses on energy-efficient RF wireless system with millimeter-scale dimension, expanding the potential use cases of millimeter-scale computing devices. It is challenging to develop RF wireless system in such constrained space. First, millimeter-sized antennae are electrically-small, resulting in low antenna efficiency. Second, their energy source is very limited due to the small battery and/or energy harvester. Third, it is required to eliminate most or all off-chip devices to further reduce system dimension. In this dissertation, these challenges are explored and analyzed, and new methods are proposed to solve them. Three prototype RF systems were implemented for demonstration and verification. The first prototype is a 10 cubic-mm inductive-coupled radio system that can be implanted through a syringe, aimed at healthcare applications with constrained space. The second prototype is a 3x3x3 mm far-field 915MHz radio system with 20-meter NLOS range in indoor environment. The third prototype is a low-power BLE transmitter using 3.5x3.5 mm planar loop antenna, enabling millimeter-scale sensors to connect with ubiquitous IoT BLE-compliant devices. The work presented in this dissertation improves use cases of millimeter-scale computers by presenting new methods for improving energy efficiency of wireless radio system with extremely small dimensions. The impact is significant in the age of IoT when everything will be connected in daily life.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147686/1/yaoshi_1.pd

Wireless Power Transfer for Next Generation Mobile Networks: Heuristic Policies and their Performance Analysis

Wireless Power Transfer permits to charge mobile devices without the need to connect them to an external power source. We consider the case in which users travel along the network, where a certain number of base stations has been deployed. The users' mobile devices, upon reaching a certain battery energy threshold, issue a charging request to the base stations. In order to allow these to decide whether to charge a device, we design some heuristic policies and analyse their performanceope

WIRELESS POWER MANAGEMENT CIRCUITS FOR BIOMEDICAL IMPLANTABLE SYSTEMS

Ph.DDOCTOR OF PHILOSOPH

Energy processing circuits for low-power applications

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 199-205).Portable electronics have fueled the rich emergence of new applications including multi-media handsets, ubiquitous smart sensors and actuators, and wearable or implantable biomedical devices. New ultra-low power circuit techniques are constantly being proposed to further improve the energy efficiency of electronic circuits. A critical part of these energy conscious systems are the energy processing and power delivery circuits that interface with the energy sources and provide conditioned voltage and current levels to the load circuits. These energy processing circuits must maintain high efficiency and reduce component count for the final solution to be attractive from an energy, size and cost perspective. The first part of this work focuses on the development of on-chip voltage scalable switched capacitor DC-DC converters in digital CMOS processes. The converters are designed to deliver regulated scalable load voltages from 0.3V up to the battery voltage of 1.2V for ultra-dynamic voltage scaled systems. The efficiency limiting mechanisms of these on-chip DC-DC converters are analyzed and digital circuit techniques are proposed to tackle these losses. Measurement results from 3 test-chips implemented in 0.18pm and 65nm CMOS processes will be provided. The converters are able to maintain >75% efficiency over a wide range of load voltage and power levels while delivering load currents up to 8mA. An embedded switched capacitor DC-DC converter that acts as the power delivery unit in a 65nm subthreshold microcontroller system will be described. The remainder of the thesis deals with energy management circuits for battery-less systems. Harvesting ambient vibrational, light or thermal energy holds much promise in realizing the goal of a self-powered system. The second part of the thesis identifies problems with commonly used interface circuits for piezoelectric vibration energy harvesters and proposes a rectifier design that gives more than 4X improvement in output power extracted from the piezoelectric energy harvester. The rectifier designs are demonstrated with the help of a test-chip built in a 0.35pm CMOS process. The inductor used within the rectifier is shared efficiently with a multitude of DC-DC converters in the energy harvesting chip leading to a compact, cost-efficient solution. The DC-DC converters designed as part of a complete power management solution achieve efficiencies of greater than 85% even in the micro-watt power levels output by the harvester. The final part of the thesis deals with thermal energy harvesters to extract electrical power from body heat. Thermal harvesters in body-worn applications output ultra-low voltages of the order of 10's of milli-volts. This presents extreme challenges to CMOS circuits that are powered by the harvester. The final part of the thesis presents a new startup technique that allows CMOS circuits to interface directly with and extract power out of thermoelectric generators without the need for an external battery, clock or reference generators. The mechanically assisted startup circuit is demonstrated with the help of a test-chip built in a 0.35pm CMOS process and can work from as low as 35mV. This enables load circuits like processors and radios to operate directly of the thermoelectric generator without the aid of a battery. A complete power management solution is provided that can extract electrical power efficiently from the harvester independent of the input voltage conditions. With the help of closed-loop control techniques, the energy processing circuit is able to maintain efficiency over a wide range of load voltage and process variations.by Yogesh Kumar Ramadass.Ph.D

Ultra-Low Power Transmitter and Power Management for Internet-of-Things Devices

Two of the most critical components in an Internet-of-Things (IoT) sensing and transmitting node are the power management unit (PMU) and the wireless transmitter (Tx). The desire for longer intervals between battery replacements or a completely self-contained, battery-less operation via energy harvesting transducers and circuits in IoT nodes demands highly efficient integrated circuits. This dissertation addresses the challenge of designing and implementing power management and Tx circuits with ultra-low power consumption to enable such efficient operation. The first part of the dissertation focuses on the study and design of power management circuits for IoT nodes. This opening portion elaborates on two different areas of the power management field: Firstly, a low-complexity, SPICE-based model for general low dropout (LDO) regulators is demonstrated. The model aims to reduce the stress and computation times in the final stages of simulation and verification of Systems-on-Chip (SoC), including IoT nodes, that employ large numbers of LDOs. Secondly, the implementation of an efficient PMU for an energy harvesting system based on a thermoelectric generator transducer is discussed. The PMU includes a first-in-its-class LDO with programmable supply noise rejection for localized improvement in the suppression. The second part of the dissertation addresses the challenge of designing an ultra- low power wireless FSK Tx in the 900 MHz ISM band. To reduce the power consumption and boost the Tx energy efficiency, a novel delay cell exploiting current reuse is used in a ring-oscillator employed as the local oscillator generator scheme. In combination with an edge-combiner PA, the Tx showed a measured energy efficiency of 0.2 nJ/bit and a normalized energy efficiency of 3.1 nJ/(bit∙mW) when operating at output power levels up to -10 dBm and data rates of 3 Mbps. To close this dissertation, the implementation of a supply-noise tolerant BiCMOS ring-oscillator is discussed. The combination of a passive, high-pass feedforward path from the supply to critical nodes in the selected delay cell and a low cost LDO allow the oscillator to exhibit power supply noise rejection levels better than –33 dB in experimental results

Integrated Data and Energy Communication Network: A Comprehensive Survey

OAPA In order to satisfy the power thirsty of communication devices in the imminent 5G era, wireless charging techniques have attracted much attention both from the academic and industrial communities. Although the inductive coupling and magnetic resonance based charging techniques are indeed capable of supplying energy in a wireless manner, they tend to restrict the freedom of movement. By contrast, RF signals are capable of supplying energy over distances, which are gradually inclining closer to our ultimate goal – charging anytime and anywhere. Furthermore, transmitters capable of emitting RF signals have been widely deployed, such as TV towers, cellular base stations and Wi-Fi access points. This communication infrastructure may indeed be employed also for wireless energy transfer (WET). Therefore, no extra investment in dedicated WET infrastructure is required. However, allowing RF signal based WET may impair the wireless information transfer (WIT) operating in the same spectrum. Hence, it is crucial to coordinate and balance WET and WIT for simultaneous wireless information and power transfer (SWIPT), which evolves to Integrated Data and Energy communication Networks (IDENs). To this end, a ubiquitous IDEN architecture is introduced by summarising its natural heterogeneity and by synthesising a diverse range of integrated WET and WIT scenarios. Then the inherent relationship between WET and WIT is revealed from an information theoretical perspective, which is followed by the critical appraisal of the hardware enabling techniques extracting energy from RF signals. Furthermore, the transceiver design, resource allocation and user scheduling as well as networking aspects are elaborated on. In a nutshell, this treatise can be used as a handbook for researchers and engineers, who are interested in enriching their knowledge base of IDENs and in putting this vision into practice

Energy Efficient Wireless Circuits for IoT in CMOS Technology

The demand for efficient and reliable wireless communication equipment is increasing at a rapid pace. The demand and need vary between different technologies including 5G and IoT. The Radio Frequency Integrated Circuits (RFIC) designers face challenges to achieve higher performance with lower power resources. Although advances in Complementary Metal-Oxide-Semiconductor (CMOS) technology has help designers, challenges still exist. Thus, novel and new ideas are welcome in RFIC design. In this dissertation, many ideas are introduced to improve efficiency and linearity for wireless receivers dedicated to IoT applications. A low-power wireless RF receiver for wireless sensor networks (WSN) is introduced. The receiver has improved linearity with incorporated current-mode circuits and high-selectivity filtering. The receiver operates at a 900 MHz industrial, scientific and medical (ISM) band and is implemented in 130 nm CMOS technology. The receiver has a frequency multiplication mixer, which uses a 300 MHz clock from a local oscillator (LO). The local oscillator is implemented using vertical delay cells to reduce power consumption. The receiver conversion gain is 40 dB and the receiver noise figure (NF) is 14 dB. The receiver IIP3 is −6 dBm and the total power consumption is 1.16 mW. A wireless RF receiver system suitable for Internet-of-Things (IoT) applications is presented. The system can simultaneously harvest energy from out-of-band (OB) blockers with normal receiver operation; thus, the battery life for IoT applications can be extended. The system has only a single antenna for simultaneous RF energy harvesting and wireless reception. The receiver is a mixer-first quadrature receiver designed to tolerate large unavoidable blockers. The system is implemented in 180 nm CMOS technology and operates at 900 MHz industrial, scientific and medical (ISM) band. The receiver gain is 41.5 dB. Operating from a 1 V supply, the receiver core consumes 430 µW. This power can be reduced to 220 µW in the presence of a large blocker (≈ 0 dBm) by the power provided by the blocker RF energy harvesting where the power conversion efficiency (PCE) is 30%. Finally, a highly linear energy efficient wireless receiver is introduced. The receiver architecture is a mixer-first receiver with a Voltage Controlled Oscillator (VCO) based amplifier incorporated as baseband amplifier. The receiver benefits from the high linearity of this amplifier. Moreover, novel clock recycling techniques are applied to make use of the amplifier’s VCOs to clock the mixer circuit and to improve power consumption. The system is implemented in 130 nm CMOS technology and operates at 900 MHz ISM band. The receiver conversion gain is 42 dB and the power consumption is 2.9 mW. The out-of-band IIP3 is 6 dBm. All presented systems and circuits in this dissertation are validated and published in various IEEE journals and conferences

Design and optimization for wireless-powered networks

Wireless Power Transfer (WPT) opens an emerging area of Wireless-Powered Networks (WPNs). In narrowband WPNs, beamforming is recognized as a key technique for enhancing information and energy transfer. However, in multi-antenna multi-sine WPT systems, not only the beamforming gain but also the rectifier nonlinearity can be exploited by a waveform design to boost the end-to-end power transfer efficiency. This thesis proposes and optimizes novel transmission strategies for two types of WPNs: narrowband autonomous relay networks and multi-antenna multi-sine WPT systems. The thesis starts by proposing a novel Energy Flow-Assisted (EFA) relaying strategy for a one-way multi-antenna Amplify-and-Forward (AF) autonomous relay network. In contrast to state-of-the-art autonomous relaying strategies, the EFA enables the relay to simultaneously harvest power from source information signals and a dedicated Energy Flow (EF) from the destination for forwarding. As a baseline, a Non-EFA (NEFA) strategy, where the relay splits power from the source signals, is also investigated. We optimize relay strategies for EFA and NEFA, so as to maximize the end-to-end rate and gain insights into the benefit of the EF. To transmit multiple data streams, we extend the EFA and the NEFA to a Multiple-Input Multiple-Output (MIMO) relay network. A novel iterative algorithm is developed to jointly optimize source precoders and relay matrices for the EFA and the NEFA, in order to maximize the end-to-end rate. Based on a channel diagonalization method, we also propose less complex EFA and NEFA algorithms. In the study of waveform designs for multi-antenna multi-sine WPT, large-scale designs with many sinewaves and transmit antennas, computationally tractable algorithms and optimal multiuser waveforms remain open challenges. To tackle these issues, we propose efficient waveform optimization algorithms to maximize the multiuser weighted-sum/minimum rectenna DC output voltage, assuming perfect Channel State Information at the Transmitter (CSIT). An optimization framework is developed to derive these waveform algorithms. Relaxing the assumption on CSIT, we propose waveform strategies for multi-antenna multi-sine WPT based on waveform selection (WS) and waveform refinement (WR), respectively. Applying the strategies, an energy transmitter can generate preferred waveforms for WPT from predesigned codebooks of waveform precoders, according to limited feedback from an energy receiver, which carries information on the harvested energy. Although the WR-based strategy is suboptimal for maximizing the average rectenna output voltage, it causes a lower overhead than the WS-based strategy. We propose novel algorithms to optimize the codebooks for the two strategies.Open Acces