Increasing Transparency and Presence of Teleoperation Systems Through Human-Centered Design

Teleoperation allows a human to control a robot to perform dexterous tasks in remote, dangerous, or unreachable environments. A perfect teleoperation system would enable the operator to complete such tasks at least as easily as if he or she was to complete them by hand. This ideal teleoperator must be perceptually transparent, meaning that the interface appears to be nearly nonexistent to the operator, allowing him or her to focus solely on the task environment, rather than on the teleoperation system itself. Furthermore, the ideal teleoperation system must give the operator a high sense of presence, meaning that the operator feels as though he or she is physically immersed in the remote task environment. This dissertation seeks to improve the transparency and presence of robot-arm-based teleoperation systems through a human-centered design approach, specifically by leveraging scientific knowledge about the human motor and sensory systems. First, this dissertation aims to improve the forward (efferent) teleoperation control channel, which carries information from the human operator to the robot. The traditional method of calculating the desired position of the robot\u27s hand simply scales the measured position of the human\u27s hand. This commonly used motion mapping erroneously assumes that the human\u27s produced motion identically matches his or her intended movement. Given that humans make systematic directional errors when moving the hand under conditions similar to those imposed by teleoperation, I propose a new paradigm of data-driven human-robot motion mappings for teleoperation. The mappings are determined by having the human operator mimic the target robot as it autonomously moves its arm through a variety of trajectories in the horizontal plane. Three data-driven motion mapping models are described and evaluated for their ability to correct for the systematic motion errors made in the mimicking task. Individually-fit and population-fit versions of the most promising motion mapping model are then tested in a teleoperation system that allows the operator to control a virtual robot. Results of a user study involving nine subjects indicate that the newly developed motion mapping model significantly increases the transparency of the teleoperation system. Second, this dissertation seeks to improve the feedback (afferent) teleoperation control channel, which carries information from the robot to the human operator. We aim to improve a teleoperation system a teleoperation system by providing the operator with multiple novel modalities of haptic (touch-based) feedback. We describe the design and control of a wearable haptic device that provides kinesthetic grip-force feedback through a geared DC motor and tactile fingertip-contact-and-pressure and high-frequency acceleration feedback through a pair of voice-coil actuators mounted at the tips of the thumb and index finger. Each included haptic feedback modality is known to be fundamental to direct task completion and can be implemented without great cost or complexity. A user study involving thirty subjects investigated how these three modalities of haptic feedback affect an operator\u27s ability to control a real remote robot in a teleoperated pick-and-place task. This study\u27s results strongly support the utility of grip-force and high-frequency acceleration feedback in teleoperation systems and show more mixed effects of fingertip-contact-and-pressure feedback

Behaviour-driven motion synthesis

Heightened demand for alternatives to human exposure to strenuous and repetitive labour, as well as to hazardous environments, has led to an increased interest in real-world deployment of robotic agents. Targeted applications require robots to be adept at synthesising complex motions rapidly across a wide range of tasks and environments. To this end, this thesis proposes leveraging abstractions of the problem at hand to ease and speed up the solving. We formalise abstractions to hint relevant robotic behaviour to a family of planning problems, and integrate them tightly into the motion synthesis process to make real-world deployment in complex environments practical. We investigate three principal challenges of this proposition. Firstly, we argue that behavioural samples in form of trajectories are of particular interest to guide robotic motion synthesis. We formalise a framework with behavioural semantic annotation that enables the storage and bootstrap of sets of problem-relevant trajectories. Secondly, in the core of this thesis, we study strategies to exploit behavioural samples in task instantiations that differ significantly from those stored in the framework. We present two novel strategies to efficiently leverage offline-computed problem behavioural samples: (i) online modulation based on geometry-tuned potential fields, and (ii) experience-guided exploration based on trajectory segmentation and malleability. Thirdly, we demonstrate that behavioural hints can be extracted on-the-fly to tackle highlyconstrained, ever-changing complex problems, from which there is no prior knowledge. We propose a multi-layer planner that first solves a simplified version of the problem at hand, to then inform the search for a solution in the constrained space. Our contributions on efficient motion synthesis via behaviour guidance augment the robots’ capabilities to deal with more complex planning problems, and do so more effectively than related approaches in the literature by computing better quality paths in lower response time. We demonstrate our contributions, in both laboratory experiments and field trials, on a spectrum of planning problems and robotic platforms ranging from high-dimensional humanoids and robotic arms with a focus on autonomous manipulation in resembling environments, to high-dimensional kinematic motion planning with a focus on autonomous safe navigation in unknown environments. While this thesis was motivated by challenges on motion synthesis, we have explored the applicability of our findings on disparate robotic fields, such as grasp and task planning. We have made some of our contributions open-source hoping they will be of use to the robotics community at large.The CDT in Robotics and Autonomous Systems at Heriot-Watt University and The University of EdinburghThe ORCA Hub EPSRC project (EP/R026173/1)The Scottish Informatics and Computer Science Alliance (SICSA

Acta Universitatis Sapientiae - Electrical and Mechanical Engineering

Series Electrical and Mechanical Engineering publishes original papers and surveys in various fields of Electrical and Mechanical Engineering

Autonomous landing of fixed-wing aircraft on mobile platforms

E n esta tesis se propone un nuevo sistema que permite la operación de aeronaves autónomas sin tren de aterrizaje. El trabajo está motivado por el interés industrial en aeronaves con la capacidad de volar a gran altitud, con más capacidad de carga útil y capaces de aterrizar con viento cruzado. El enfoque seguido en este trabajo consiste en eliminar el sistema de aterrizaje de una aeronave de ala fija empleando una plataforma móvil de aterrizaje en tierra. La aeronave y la plataforma deben sincronizar su movimiento antes del aterrizaje, lo que se logra mediante la estimación del estado relativo entre ambas y el control cooperativo del movimiento. El objetivo principal de esta Tesis es el desarrollo de una solución práctica para el aterrizaje autónomo de una aeronave de ala fija en una plataforma móvil. En la tesis se combinan nuevos métodos con experimentos prácticos para los cuales se ha desarrollado un sistema de pruebas específico. Se desarrollan dos variantes diferentes del sistema de aterrizaje. El primero presta atención especial a la seguridad, es robusto ante retrasos en la comunicación entre vehículos y cumple procedimientos habituales de aterrizaje, al tiempo que reduce la complejidad del sistema. En el segundo se utilizan trayectorias optimizadas del vehículo y sincronización bilateral de posición para maximizar el rendimiento del aterrizaje en términos de requerimientos de longitud necesaria de pista, pero la estabilidad es dependiente del retraso de tiempo, con lo cual es necesario desarrollar un controlador estabilizador ampliado, basado en pasividad, que permite resolver este problema. Ambas estrategias imponen requisitos funcionales a los controladores de cada uno de los vehículos, lo que implica la capacidad de controlar el movimiento longitudinal sin afectar el control lateral o vertical, y viceversa. El control de vuelo basado en energía se utiliza para proporcionar dicha funcionalidad a la aeronave. Los sistemas de aterrizaje desarrollados se han analizado en simulación estableciéndose los límites de rendimiento mediante múltiples repeticiones aleatorias. Se llegó a la conclusión de que el controlador basado en seguridad proporciona un rendimiento de aterrizaje satisfactorio al tiempo que suministra una mayor seguridad operativa y un menor esfuerzo de implementación y certificación. El controlador basado en el rendimiento es prometedor para aplicaciones con una longitud de pista limitada. Se descubrió que los beneficios del controlador basado en el rendimiento son menos pronunciados para una dinámica de vehículos terrestres más lenta. Teniendo en cuenta la dinámica lenta de la configuración del demostrador, se eligió el enfoque basado en la seguridad para los primeros experimentos de aterrizaje. El sistema de aterrizaje se validó en diversas pruebas de aterrizaje exitosas, que, a juicio del autor, son las primeras en el mundo realizadas con aeronaves reales. En última instancia, el concepto propuesto ofrece importantes beneficios y constituye una estrategia prometedora para futuras soluciones de aterrizaje de aeronaves.In this thesis a new landing system is proposed, which allows for the operation of autonomous aircraft without landing gear. The work was motivated by the industrial need for more capable high altitude aircraft systems, which typically suffer from low payload capacity and high crosswind landing sensitivity. The approach followed in this work consists in removing the landing gear system from the aircraft and introducing a mobile ground-based landing platform. The vehicles must synchronize their motion prior to landing, which is achieved through relative state estimation and cooperative motion control. The development of a practical solution for the autonomous landing of an aircraft on a moving platform thus constitutes the main goal of this thesis. Therefore, theoretical investigations are combined with real experiments for which a special setup is developed and implemented. Two different landing system variants are developed — the safety-based landing system is robust to inter-vehicle communication delays and adheres to established landing procedures, while reducing system complexity. The performance-based landing system uses optimized vehicle trajectories and bilateral position synchronization to maximize landing performance in terms of used runway, but suffers from time delay-dependent stability. An extended passivity-based stabilizing controller was implemented to cope with this issue. Both strategies impose functional requirements on the individual vehicle controllers, which imply independent controllability of the translational degrees of freedom. Energy-based flight control is utilized to provide such functionality for the aircraft. The developed landing systems are analyzed in simulation and performance bounds are determined by means of repeated random sampling. The safety-based controller was found to provide satisfactory landing performance while providing higher operational safety, and lower implementation and certification effort. The performance-based controller is promising for applications with limited runway length. The performance benefits were found to be less pronounced for slower ground vehicle dynamics. Given the slow dynamics of the demonstrator setup, the safety-based approach was chosen for first landing experiments. The landing system was validated in a number of successful landing trials, which to the author’s best knowledge was the first time such technology was demonstrated on the given scale, worldwide. Ultimately, the proposed concept offers decisive benefits and constitutes a promising strategy for future aircraft landing solutions

Applications of Mathematical Models in Engineering

The most influential research topic in the twenty-first century seems to be mathematics, as it generates innovation in a wide range of research fields. It supports all engineering fields, but also areas such as medicine, healthcare, business, etc. Therefore, the intention of this Special Issue is to deal with mathematical works related to engineering and multidisciplinary problems. Modern developments in theoretical and applied science have widely depended our knowledge of the derivatives and integrals of the fractional order appearing in engineering practices. Therefore, one goal of this Special Issue is to focus on recent achievements and future challenges in the theory and applications of fractional calculus in engineering sciences. The special issue included some original research articles that address significant issues and contribute towards the development of new concepts, methodologies, applications, trends and knowledge in mathematics. Potential topics include, but are not limited to, the following: Fractional mathematical models; Computational methods for the fractional PDEs in engineering; New mathematical approaches, innovations and challenges in biotechnologies and biomedicine; Applied mathematics; Engineering research based on advanced mathematical tools