Digital Image Encryption Implementations Based on AES Algorithm

Objectives: To increase needed for exchanging digital photos electronically, due to alarming demand for multimedia applications, and because of the increasing use of images in electronic processes. Hence, the need for protection by unauthorized user is necessary. Method: This paper primarily is focusing on the necessary protection of these images using a specific analyzes algorithm: Advanced Encryption Standard (AES) with a full its description, which is known as an algorithm (Rijndael). Findings: It will be determined the address decryption, which is made up of different styles in all encryption and decryption steps in order to protect the valuable information. This algorithm will be implemented on MATLAB software programming. Application: The above results and analysis for this crypto system based on AES algorithm give a high performance. So we have reason to believe that use this method to encrypt the image will have a very good prospect in the future

Parallel Multiplier Designs for the Galois/Counter Mode of Operation

The Galois/Counter Mode of Operation (GCM), recently standardized by NIST, simultaneously authenticates and encrypts data at speeds not previously possible for both software and hardware implementations. In GCM, data integrity is achieved by chaining Galois field multiplication operations while a symmetric key block cipher such as the Advanced Encryption Standard (AES), is used to meet goals of confidentiality. Area optimization in a number of proposed high throughput GCM designs have been approached through implementing efficient composite Sboxes for AES. Not as much work has been done in reducing area requirements of the Galois multiplication operation in the GCM which consists of up to 30% of the overall area using a bruteforce approach. Current pipelined implementations of GCM also have large key change latencies which potentially reduce the average throughput expected under traditional internet traffic conditions. This thesis aims to address these issues by presenting area efficient parallel multiplier designs for the GCM and provide an approach for achieving low latency key changes. The widely known Karatsuba parallel multiplier (KA) and the recently proposed Fan-Hasan multiplier (FH) were designed for the GCM and implemented on ASIC and FPGA architectures. This is the first time these multipliers have been compared with a practical implementation, and the FH multiplier showed note worthy improvements over the KA multiplier in terms of delay with similar area requirements. Using the composite Sbox, ASIC designs of GCM implemented with subquadratic multipliers are shown to have an area savings of up to 18%, without affecting the throughput, against designs using the brute force Mastrovito multiplier. For low delay LUT Sbox designs in GCM, although the subquadratic multipliers are a part of the critical path, implementations with the FH multiplier showed the highest efficiency in terms of area resources and throughput over all other designs. FPGA results similarly showed a significant reduction in the number of slices using subquadratic multipliers, and the highest throughput to date for FPGA implementations of GCM was also achieved. The proposed reduced latency key change design, which supports all key types of AES, showed a 20% improvement in average throughput over other GCM designs that do not use the same techniques. The GCM implementations provided in this thesis provide some of the most area efficient, yet high throughput designs to date

Crypto-processeur architecture, programmation et évaluation de la sécurité

Les architectures des processeurs et coprocesseurs cryptographiques se montrent fréquemment vulnérables aux différents types d attaques ; en particulier, celles qui ciblent une révélation des clés chiffrées. Il est bien connu qu une manipulation des clés confidentielles comme des données standards par un processeur peut être considérée comme une menace. Ceci a lieu par exemple lors d un changement du code logiciel (malintentionné ou involontaire) qui peut provoquer que la clé confidentielle sorte en clair de la zone sécurisée. En conséquence, la sécurité de tout le système serait irréparablement menacée. L objectif que nous nous sommes fixé dans le travail présenté, était la recherche d architectures matérielles reconfigurables qui peuvent fournir une sécurité élevée des clés confidentielles pendant leur génération, leur enregistrement et leur échanges en implantant des modes cryptographiques de clés symétriques et des protocoles. La première partie de ce travail est destinée à introduire les connaissances de base de la cryptographie appliquée ainsi que de l électronique pour assurer une bonne compréhension des chapitres suivants. Deuxièmement, nous présentons un état de l art des menaces sur la confidentialité des clés secrètes dans le cas où ces dernières sont stockées et traitées dans un système embarqué. Pour lutter contre les menaces mentionnées, nous proposons alors de nouvelles règles au niveau du design de l architecture qui peuvent augmenter la résistance des processeurs et coprocesseurs cryptographiques contre les attaques logicielles. Ces règles prévoient une séparation des registres dédiés à l enregistrement de clés et ceux dédiés à l enregistrement de données : nous proposons de diviser le système en zones : de données, du chiffreur et des clés et à isoler ces zones les unes des autres au niveau du protocole, du système, de l architecture et au niveau physique. Ensuite, nous présentons un nouveau crypto-processeur intitulé HCrypt, qui intègre ces règles de séparation et qui assure ainsi une gestion sécurisée des clés. Mises à part les instructions relatives à la gestion sécurisée de clés, quelques instructions supplémentaires sont dédiées à une réalisation simple des modes de chiffrement et des protocoles cryptographiques. Dans les chapitres suivants, nous explicitons le fait que les règles de séparation suggérées, peuvent également être étendues à l architecture d un processeur généraliste et coprocesseur. Nous proposons ainsi un crypto-coprocesseur sécurisé qui est en mesure d être utilisé en relation avec d autres processeurs généralistes. Afin de démontrer sa flexibilité, le crypto-coprocesseur est interconnecté avec les processeurs soft-cores de NIOS II, de MicroBlaze et de Cortex M1. Par la suite, la résistance du crypto-processeur par rapport aux attaques DPA est testée. Sur la base de ces analyses, l architecture du processeur HCrypt est modifiée afin de simplifier sa protection contre les attaques par canaux cachés (SCA) et les attaques par injection de fautes (FIA). Nous expliquons aussi le fait qu une réorganisation des blocs au niveau macroarchitecture du processeur HCrypt, augmente la résistance du nouveau processeur HCrypt2 par rapport aux attaques de type DPA et FIA. Nous étudions ensuite les possibilités pour pouvoir reconfigurer dynamiquement les parties sélectionnées de l architecture du processeur crypto-coprocesseur. La reconfiguration dynamique peut être très utile lorsque l algorithme de chiffrement ou ses implantations doivent être changés en raison de l apparition d une vulnérabilité Finalement, la dernière partie de ces travaux de thèse, est destinée à l exécution des tests de fonctionnalité et des optimisations stricts des deux versions du cryptoprocesseur HCryptArchitectures of cryptographic processors and coprocessors are often vulnerable to different kinds of attacks, especially those targeting the disclosure of encryption keys. It is well known that manipulating confidential keys by the processor as ordinary data can represent a threat: a change in the program code (malicious or unintentional) can cause the unencrypted confidential key to leave the security area. This way, the security of the whole system would be irrecoverably compromised. The aim of our work was to search for flexible and reconfigurable hardware architectures, which can provide high security of confidential keys during their generation, storage and exchange while implementing common symmetric key cryptographic modes and protocols. In the first part of the manuscript, we introduce the bases of applied cryptography and of reconfigurable computing that are necessary for better understanding of the work. Second, we present threats to security of confidential keys when stored and processed within an embedded system. To counteract these threats, novel design rules increasing robustness of cryptographic processors and coprocessors against software attacks are presented. The rules suggest separating registers dedicated to key storage from those dedicated to data storage: we propose to partition the system into the data, cipher and key zone and to isolate the zones from each other at protocol, system, architectural and physical levels. Next, we present a novel HCrypt crypto-processor complying with the separation rules and thus ensuring secure key management. Besides instructions dedicated to secure key management, some additional instructions are dedicated to easy realization of block cipher modes and cryptographic protocols in general. In the next part of the manuscript, we show that the proposed separation principles can be extended also to a processor-coprocessor architecture. We propose a secure crypto-coprocessor, which can be used in conjunction with any general-purpose processor. To demonstrate its flexibility, the crypto-coprocessor is interconnected with the NIOS II, MicroBlaze and Cortex M1 soft-core processors. In the following part of the work, we examine the resistance of the HCrypt cryptoprocessor to differential power analysis (DPA) attacks. Following this analysis, we modify the architecture of the HCrypt processor in order to simplify its protection against side channel attacks (SCA) and fault injection attacks (FIA). We show that by rearranging blocks of the HCrypt processor at macroarchitecture level, the new HCrypt2 processor becomes natively more robust to DPA and FIA. Next, we study possibilities of dynamically reconfiguring selected parts of the processor - crypto-coprocessor architecture. The dynamic reconfiguration feature can be very useful when the cipher algorithm or its implementation must be changed in response to appearance of some vulnerability. Finally, the last part of the manuscript is dedicated to thorough testing and optimizations of both versions of the HCrypt crypto-processor. Architectures of crypto-processors and crypto-coprocessors are often vulnerable to software attacks targeting the disclosure of encryption keys. The thesis introduces separation rules enabling crypto-processor/coprocessors to support secure key management. Separation rules are implemented on novel HCrypt crypto-processor resistant to software attacks targetting the disclosure of encryption keysST ETIENNE-Bib. électronique (422189901) / SudocSudocFranceF

A configurable AES processor for enhanced security

[[abstract]]We propose a configurable AES processor for extended-security communication. The proposed architecture can provide up to 2/sup 19/ different AES block cipher schemes within a reasonable hardware cost. Data can be encrypted not only with secret keys and initial vectors, but also by different block ciphers during the communication. A novel on-the-fly key expansion design is also proposed for 28-, 192-, and 256-bit keys. Our unified hardware can run both the original AES algorithm and the extended AES algorithm. The proposed processor design has been fabricated by a 0.25/spl mu/m CMOS process, with a silicon area of 6.93mm/sup 2/ - about 200.5K equivalent gates. Under a 66MHz clock, the throughput rate for both the ECB and CBC operation modes are 844.8Mbps, 704Mbps, and 603.4Mbps for 128-bit, 192-bit, and 256-bit keys, respectively.[[fileno]]2030243030034[[department]]資訊工程學