Inductively Coupled CMOS Power Receiver For Embedded Microsensors

Inductively coupled power transfer can extend the lifetime of embedded microsensors that save costs, energy, and lives. To expand the microsensors' functionality, the transferred power needs to be maximized. Plus, the power receiver needs to handle wide coupling variations in real applications. Therefore, the objective of this research is to design a power receiver that outputs the highest power for the widest coupling range. This research proposes a switched resonant half-bridge power stage that adjusts both energy transfer frequency and duration so the output power is maximally high. A maximum power point (MPP) theory is also developed to predict the optimal settings of the power stage with 98.6% accuracy. Finally, this research addresses the system integration challenges such as synchronization and over-voltage protection. The fabricated self-synchronized prototype outputs up to 89% of the available power across 0.067%~7.9% coupling range. The output power (in percentage of available power) and coupling range are 1.3× and 13× higher than the comparable state of the arts.Ph.D

Communication and energy delivery architectures for personal medical devices

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 219-232).Advances in sensor technologies and integrated electronics are revolutionizing how humans access and receive healthcare. However, many envisioned wearable or implantable systems are not deployable in practice due to high energy consumption and anatomically-limited size constraints, necessitating large form-factors for external devices, or eventual surgical re-implantation procedures for in-vivo applications. Since communication and energy-management sub-systems often dominate the power budgets of personal biomedical devices, this thesis explores alternative usecases, system architectures, and circuit solutions to reduce their energy burden. For wearable applications, a system-on-chip is designed that both communicates and delivers power over an eTextiles network. The transmitter and receiver front-ends are at least an order of magnitude more efficient than conventional body-area networks. For implantable applications, two separate systems are proposed that avoid reimplantation requirements. The first system extracts energy from the endocochlear potential, an electrochemical gradient found naturally within the inner-ear of mammals, in order to power a wireless sensor. Since extractable energy levels are limited, novel sensing, communication, and energy management solutions are proposed that leverage duty-cycling to achieve enabling power consumptions that are at least an order of magnitude lower than previous work. Clinical measurements show the first system demonstrated to sustain itself with a mammalian-generated electrochemical potential operating as the only source of energy into the system. The second system leverages the essentially unlimited number of re-charge cycles offered by ultracapacitors. To ease patient usability, a rapid wireless capacitor charging architecture is proposed that employs a multi-tapped secondary inductive coil to provide charging times that are significantly faster than conventional approaches.by Patrick Philip Mercier.Ph.D

Computational efficiency maximization for UAV-assisted MEC network with energy harvesting in disaster scenarios

Wireless networks are expected to provide unlimited connectivity to an increasing number of heterogeneous devices. Future wireless networks (sixth-generation (6G)) will accomplish this in three-dimensional (3D) space by combining terrestrial and aerial networks. However, effective resource optimization and standardization in future wireless networks are challenging because of massive resource-constrained devices, diverse quality-of-service (QoS) requirements, and a high density of heterogeneous devices. Recently, unmanned aerial vehicle (UAV)-assisted mobile edge computing (MEC) networks are considered a potential candidate to provide effective and efficient solutions for disaster management in terms of disaster monitoring, forecasting, in-time response, and situation awareness. However, the limited size of end-user devices comes with the limitation of battery lives and computational capacities. Therefore, offloading, energy consumption and computational efficiency are significant challenges for uninterrupted communication in UAV-assisted MEC networks. In this thesis, we consider a UAV-assisted MEC network with energy harvesting (EH). To achieve this, we mathematically formulate a mixed integer non-linear programming problem to maximize the computational efficiency of UAV-assisted MEC networks with EH under disaster situations. A power splitting architecture splits the source power for communication and EH. We jointly optimize user association, the transmission power of UE, task offloading time, and UAV’s optimal location. To solve this optimization problem, we divide it into three stages. In the first stage, we adopt k-means clustering to determine the optimal locations of the UAVs. In the second stage, we determine user association. In the third stage, we determine the optimal power of UE and offloading time using the optimal UAV location from the first stage and the user association indicator from the second stage, followed by linearization and the use of interior-point method to solve the resulting linear optimization problem. Simulation results for offloading, no-offloading, offloading with EH, and no-offloading no-EH scenarios are presented with a varying number of UAVs and UEs. The results show the proposed EH solution’s effectiveness in offloading scenarios compared to no-offloading scenarios in terms of computational efficiency, bits computed, and energy consumptio