Pectoral fin control of a biorobotic Auv in the dive pLane

Maneuvering of biologically inspired robotic undersea vehicles (BAUVs) is considered in the dive plane using pectoral-like oscillating fins. Firstly, an open-loop and optimal feedback control system is designed to control a biorobotic AUV in the dive pLane Next, an inverse control system for dive-plane control is derived based on a discrete-time AUV model. An approximate minimum phase system with a new output variable is derived for the purpose of design; Computational fluid dynamics (CFD) is used to parameterize the forces generated by a mechanical oscillatory flapping foil, which attempts to mimic the pectoral fin of a fish. Finally, a control system for the independent asymptotic control of the lateral and rotational motion of a 2-D hydrofoil based on the internal model principle (servomechanism theory) is derived

Nonlinear suboptimal and adaptive pectoral fin control of autonomous underwater vehicle

Autonomous underwater vehicles (AUVs) are used for numerous applications in the deep sea, such as hydrographic survey, sea bed mining and oceanographic mapping, etc. Presently, significant amount of effort, is being made in developing biorobotic AUVs (BAUVs) with biologically inspired control surfaces. However, the dynamics of AUVs and BAUVs are highly nonlinear and the hydrodynamic coefficients are not precisely known. As such the development of nonlinear and adaptive control systems is of considerable importance; We consider the suboptimal dive plane control of AUVs using the state-dependent Riccati equation (SDRE) technique. This method provides effective means of designing nonlinear control systems for minimum as well as nonminimum phase AUV models. Moreover, hard control constraints are included in the design process; We also attempt to design adaptive control systems for BAUVs using biologically-inspired pectoral-like fins. The fins are assumed to be oscillating harmonically with a combined linear (sway) and angular (yaw) motion. The bias (mean) angle of the angular motion of the fin is used as a control input. Using discrete-time state variable representation of the BAUV, adaptive sampled-data control systems for the trajectory control are derived using state feedback as well as output feedback. We develop direct as well as indirect adaptive control systems for BAUVs. The advantage of the indirect adaptive law lies in its applicability to minimum as well as nonminimum phase systems. Simulation results are presented to evaluate the performance of each control system

The development of a biologically inspired propulsor for unmanned underwater vehicles

IEEE Journal of Oceanic Engineering, 32(3): pp. 533-550Fish are remarkable in their ability to maneuver and to control their body position. This ability is the result of the coordinated movement of fins which extend from the body and form control surfaces that can create and vector forces in 3-D. We have embarked on a research program designed to develop a maneuvering propulsor for unmanned undersea vehicles (UUVs) that is based on the pectoral fin of the bluegill sunfish. For this, the anatomy, kinematics, and hydrodynamics of the sunfish pectoral fin were investigated experimentally and through the use of computational fluid dynamics (CFD) simulations. These studies identified that the kinematics of the sunfish pectoral fin are very complex and are not easily described by traditional “rowing”- and “flapping”-type kinematics. A consequence of the complex motion is that the pectoral fin can produce forward thrust during both its outstroke (abduction) and instroke (adduction), and while doing so generates only small lateral and lift forces. The results of the biological studies were used to guide the design of robotic pectoral fins which were built as experimental devices and used to investigate the mechanisms of thrust production and control. Because of a design that was based heavily on the anatomy of the sunfish fin, the robotic pectoral fins had the level of control and degrees of freedom necessary to reproduce many of the complex fin motions used by the sunfish during steady swimming. These robotic fins are excellent experimental tools, and are an important first step towards developing propulsive devices that will give the next generation of UUVs the ability to produce and control thrust like highly maneuverable fish

Dorsal and pectoral fin control of a biorobotic autonomous underwater vehicle

This thesis involves an in-depth research on the maneuvering of bio-robotic autonomous undersea vehicles (BAUVs) using bio-mimetic swimming mechanisms. Motivation was derived from the amazing flexibility and agility the fish inherit with the help of their pectoral and dorsal fins; In the first part of the thesis, control of BAUVs using dorsal fins is considered. The force produced by the cambering of the dorsal fins is used for control. An indirect adaptive controller is designed for depth tracking along constant trajectories even when the system parameters are not known. Next, for following time-varying trajectories, an adaptive control system for yaw plane control of BAUVs is developed. It is capable of working efficiently even when large uncertainties in the system parameters are present and system nonlinearities are dominant; In the second part of the thesis, pectoral fin control of BAUVs is considered. The flapping of these oscillating fins provides the necessary force and moment for control. A discrete-time optimal controller for set point (constant path) control and inverse controller for tracking time varying trajectories in the yaw plane are derived. Further, an indirect adaptive control system that can accomplish depth trajectory tracking even when the model paramters are completely unknown is developed; The performance evaluation of the controllers is done by simulation using matlab/simulink

Control of Oscillating Foil for Propulsion of Biorobotic Autonomous Underwater Vehicle (AUV)

The paper treats the question of control of a laterally and rotationally oscillating hydrofoil for the propulsion of biologically inspired robotic (biorobotic) autonomous underwater vehicles (BAUVs). Sinusoidal oscillations of foils produce maneuvering and propulsive forces. The design is based on the internal model principle. Two springs are used to transmit forces from the actuators to the foil. Oscillating fins produce periodic forces, which can be used for fish-like propulsion and control of autonomous underwater vehicles (AUVs). The equations of motion of the foil include hydrodynamic lift and moment based on linear, unsteady, aerodynamic theory. A control law is derived for the lateral and rotational sinusoidal oscillation of the foil. In the closed-loop system, the lateral displacement and the rotational angle of the foil asymptotically follow sinusoidal trajectories of distinct frequencies and amplitudes independently. Simulation results are presented to show the trajectory tracking performance of the foil for different freestream velocities and sinusoidal command trajectories

Hydrodynamics of Biomimetic Marine Propulsion and Trends in Computational Simulations

[Abstract] The aim of the present paper is to provide the state of the works in the field of hydrodynamics and computational simulations to analyze biomimetic marine propulsors. Over the last years, many researchers postulated that some fish movements are more efficient and maneuverable than traditional rotary propellers, and the most relevant marine propulsors which mimic fishes are shown in the present work. Taking into account the complexity and cost of some experimental setups, numerical models offer an efficient, cheap, and fast alternative tool to analyze biomimetic marine propulsors. Besides, numerical models provide information that cannot be obtained using experimental techniques. Since the literature about trends in computational simulations is still scarce, this paper also recalls the hydrodynamics of the swimming modes occurring in fish and summarizes the more relevant lines of investigation of computational models

Design and Projected Performance of a Flapping Foil AUV

The design and construction of a biomimetic flapping foil autonomous underwater vehicle is detailed. The vehicle was designed as a proof of concept for the use of oscillating foils as the sole source of motive power for a cruising and hovering underwater vehicle. Primary vehicle design requirements included scalability and flexibility in terms of the number and placement of foils, so as to maximize experimental functionality. This goal was met by designing an independent self-contained module to house each foil, requiring only direct current power and a connection to the vehicle’s Ethernet local area network for operation. The results of tests on the foil modules in the Massachusetts Institute of Technology (MIT) Marine Hydrodynamics Water Tunnel and the MIT Ship Model Testing Tank are both used to demonstrate fundamental properties of flapping foils and to predict the performance of the specific vehicle design based on the limits of the actuators. The maximum speed of the vehicle is estimated based on the limitations of the specific actuator and is shown to be a strong function of the vehicle drag coefficient. When using four foils, the maximum speed increases from 1 m/s with a vehicle Cd of 1.4 to 2 m/s when Cd = 0.1, where Cd is based on vehicle frontal area. Finally, issues of vehicle control are considered, including the decoupling of speed and pitch control using pitch-biased maneuvering and the tradeoff between actuator bandwidth and authority during both the cruising and hovering operation

Correction: New Approaches for Assessing Squid Fin Motions: Coupling Proper Orthogonal Decomposition With Volumetric Particle Tracking Velocimetry (doi:10.1242/jeb.176750)

Squid, which swim using a coupled fin/jet system powered by muscular hydrostats, pose unique challenges for the study of locomotion. The high flexibility of the fins and complex flow fields generated by distinct propulsion systems require innovative techniques for locomotive assessment. For this study, we used proper orthogonal decomposition (POD) to decouple components of the fin motions and defocusing digital particle tracking velocimetry (DDPTV) to quantify the resultant 3D flow fields. Kinematic footage and DDPTV data were collected from brief squid, Lolliguncula brevis [3.1–6.5 cm dorsal mantle length (DML)], swimming freely in a water tunnel at speeds of 0.39–7.20 DML s−1. Both flap and wave components were present in all fin motions, but the relative importance of the wave components was higher for arms-first swimming than for tail-first swimming and for slower versus higher speed swimming. When prominent wave components were present, more complex interconnected vortex ring wakes were observed, while fin movements dominated by flapping resulted in more spatially separated vortex ring patterns. Although the jet often produced the majority of the thrust for steady rectilinear swimming, our results demonstrated that the fins can contribute more thrust than the jet at times, consistently produce comparable levels of lift to the jet during arms-first swimming, and can boost overall propulsive efficiency. By producing significant drag signatures, the fins can also aid in stabilization and maneuvering. Clearly, fins play multiple roles in squid locomotion, and when coupled with the jet, allow squid to perform a range of swimming behaviors integral to their ecological success