Analysis and Design of a Transmitter for Wireless Communications in CMOS Technology

The number of wireless devices has grown tremendously over the last decade. Great technology improvements and novel transceiver architectures and circuits have enabled an astonishingly expanding set of radio-frequency applications. CMOS technology played a key role in enabling a large-scale diffusion of wireless devices due to its unique advantages in cost and integration. Novel digital-intensive transceivers have taken full advantage of CMOS technology scaling predicted by Moore's law. Die-shrinking has enabled ubiquitous diffusion of low-cost, small form factor and low power wireless devices. However, Radio Frequency (RF) Power Amplifiers (PA) transceiver functionality is historically implemented in a module which is separated from the CMOS core of the transceiver. The PA is traditionally dictating power and battery life of the transceiver, thus justifying its implementation in a tailored technology. By contrast, a fully integrated CMOS transceiver with no external PA would hugely benefit in terms of reduced area and system complexity. In this work, a fully integrated prototype of a Switched-Capacitor Power Amplifier (SCPA) has been implemented in a 28nm CMOS technology. The SCPA provides the functionalities of a PA and of a Radio-Frequency Digital-to-Analog Converter (RF-DAC) in a monolithic CMOS device. The switching output stage of the SCPA enables this circuital topology to reach high efficiencies and offers excellent power handling capabilities. In this work, the properties of the SCPA are analyzed in an extensive and detailed dissertation. Nowadays Wireless Communications operate in a very crowded spectrum, with strict coexistence requirements, thus demanding a strong linearity to the RF-DAC section of the SCPA. A great part of the work of designing a good SCPA is in fact designing a good RF-DAC. To enhance RF-DAC linearity, a precision of the timing of the elements up to the ps range is required. The use of a single core-supply voltage in the whole circuit including the CMOS inverter of the switching output stage enables the use of minimum size devices, improving accuracy and speed in the timing of the elements. The whole circuit operates therefore on low core-supply voltage. Throughout this work, a detailed analysis carefully describes the electromagnetic structures which maximize power and efficiency of low-voltage SCPAs. Due to layout issues subsequent to limited available voltages, however, there is a practical limitation in the maximum achievable power of low-voltage SCPAs. In this work, a Multi-Port Monolithic Power Combiner (PC) is introduced to overcome this limitation and further enhance total achieved system power. The PC sums the power of a collection of SCPAs to a single output, allowing higher output powers at a high efficiency. Benefits, drawbacks and design of SCPA PCs are discussed in this work. The implemented circuit features the combination of four differential SCPAs through a four-way monolithic PC and is simulated to obtain a maximum drain efficiency of 44% at a peak output power of 29dBm on 1.1V supply voltage. Extensive spectrum analysis offers full evaluation of system performances. After exploring state-of-the-art possibilities offered by an advanced 28nm CMOS technology, this work predicts through rigorous theoretical analysis the expected evolution of SCPA performances with the scaling of CMOS Technologies. The encouraging forecast further emphasizes the importance of SCPA circuits for the future of high-performance Wireless Communications

Integrated circuits for efficient power delivery using pulse-width-modulation

Circuits and architectures for efficient power delivery have become crucial in emerging smart systems. Switching power amplifiers (PA) are very attractive for such applications, because they exhibit better efficiency compared to linear PA designs, due to saturated operation. Switching PAs also allow for utilization of deep submicron CMOS technologies, due to which these designs can be easily integrated with digital circuits, and can benefit from process scaling, in performance as well as in area. Pulse-width-modulation (PWM) is commonly used with switching PAs. A PWM signal typically employs a high-frequency switching pulse waveform as a carrier signal, wherein the pulse-width or duty-cycle of each pulse is modulated by a given low-frequency input signal. The carrier frequency can vary from several kHz to GHz, and is typically determined by the target application. In this thesis, efficient power-delivery circuits that use PWM with switching class-D stages are presented. Advanced circuit techniques, as well as architectures for PWM are proposed to enhance efficiency and circumvent the limitations of conventional architectures. A digitally-intensive transmitter using RF-PWM with a class-D PA is described in the first part of the thesis. The use of carrier switching for alleviating the dynamic range limitation that can be observed in classical RF-PWM implementations is introduced. The approach employs the full carrier frequency for half of the amplitude range, and the second harmonic of half of the carrier frequency, for the remainder of the amplitude range. This concept not only allows the transmitter to drive modulated signals with large peak-to-average power ratio (PAPR), but also improves the back-off efficiency due to reduced switching losses in the half carrier-frequency mode. A glitch-free phase selector is proposed that removes the deleterious glitches that can occur at the input data transitions. The phase-selector also prevents D flip-flop setup-and-hold time violations. The transmitter has been implemented in a 130-nm CMOS process. The measured peak output power and power-added-efficiency (PAE) are 25.6 dBm and 34%, respectively. While driving 802.11g 20-MHz 64-QAM OFDM signals, the average measured output power is 18.3 dBm and the PAE is 16%, with an EVM of -25.5 dB. The second part of the thesis describes a high-speed driver that provides a PWM output using a class-D PA. A PLL-based architecture is employed which eliminates the requirement for a precise ramp or triangular signal generator, and a high-speed comparator, which are typically used for PWM generation. Multi-level signaling is proposed to enhance back-off as well as peak efficiency, which is critical for signals with high PAPR. A differential, folded PWM scheme is introduced to achieve highly linear operation. 3-level operation is achieved without the requirement for additional supply source or sink paths, while 5-level operation is achieved with additional supply source and sink paths, compared to 2-level operation. The PWM driver has been implemented in a 130-nm CMOS process and can operate with a switching frequency of 40-to-170 MHz. For 2/3/5-level PA operation, with a 500 kHz sinusoidal input and 60 MHz switching frequency, the measured THD is -61/-62/-53 dB and corresponding efficiency is 71/83/86% with 175/200/220 mW output power level, respectively. Performance has also been verified for 2/3-level PA operation with a high PAPR signal with 500 kHz bandwidth. While intended as a general purpose amplifier, the approach is well-suited for applications such as power-line communications (PLC). The final part of the thesis introduces an efficient buck/buck-boost reconfigurable LED driver that supports PWM and PFM operation. The driver is based on peak current control. Rectified sin as well as sin² functions are employed in the reference signal to improve the power factor (PF) and total harmonic distortion (THD) of the buck and buck-boost converters. The design ensures that the peak of the inductor current maintains a constant level that is invariant for different AC line voltages. The operating mode of the design can be changed between PWM and PFM. The LED driver has been implemented in a 130-nm CMOS process. PF and THD are improved when the proposed reference is employed, and peak PF and lowest THD are 0.995/0.983/0.996 and 7.8/6.2/3.5% for the buck (PWM), buck (PFM), buck-boost (PFM) cases, respectively. The corresponding peak efficiency for the three cases is 88/92/91%, respectively.Electrical and Computer Engineerin

PLL-based digitally-intensive wireless transmitter architectures employing RF Pulse-Width Modulation

3G and 4G wireless networks have been recently proposed for Machine to Machine (M2M) communications in order to achieve ubiquitous coverage, robust security and high reliability. The most critical design consideration in transceivers for several portable Internet of Things (IoT) wireless communication applications is often power efficiency. This poses a key design challenge in wireless transmitters for communication standards that utilize high peak-to average power ratio (PAPR) signals. In this work, two PLL-based digitally-intensive wireless transmitter architectures employing RF-Pulse Width Modulation (RF-PWM) are presented, in order to address the efficiency challenge. The first architecture employs envelope and phase information, while the second utilizes quadrature I-Q signal components directly. A key contribution of this work is the use of analog-domain Pulse-Width Modulation (PWM) that can directly generate the output signals at the desired RF band without the need for frequency up-conversion and without degradation caused by quantization. By employing Class-D output stages, the proposed architectures can provide enhanced efficiency and allow for the use of broadband loads. These approaches make the designs suitable for multi-band and multi-mode operation. Furthermore, the digitally-intensive architectures can benefit from technology scaling. A prototype RF-PWM transmitter with a Class-D power amplifier (PA) which utilizes a polar approach is implemented in a 65-nm CMOS technology. For an LTE signal with a 1.4 MHz bandwidth and a 6.4 dB peak-to-average- power ratio (PAPR), the RF-PWM transmitter achieves a power-added efficiency (PAE) of 17.5% and an adjacent channel leakage ratio (ACLR) of -30.9 dBc and -31.1 dBc at an average output power of 16.1 dBm. The proposed transmitter achieves a peak output power of 22.4 dBm with 46.6% PAE and 38.8% efficiency for the full RF-PWM transmitter, including PAs.Electrical and Computer Engineerin

Energy-Efficient Wireless Connectivity and Wireless Charging For Internet-of-Things (IoT) Applications

During the recent years, the Internet-of-Things (IoT) has been rapidly evolving. It is indeed the future of communication that has transformed Things of the real world into smarter devices. To date, the world has deployed billions of “smart” connected things. Predictions say there will be 10’s of billions of connected devices by 2025 and in our lifetime we will experience life with a trillion-node network. However, battery lifespan exhibits a critical barrier to scaling IoT devices. Replacing batteries on a trillion-sensor scale is a logistically prohibitive feat. Self-powered IoT devices seems to be the right direction to stand up to that challenge. The main objective of this thesis is to develop solutions to achieve energy-efficient wireless-connectivity and wireless-charging for IoT applications. In the first part of the thesis, I introduce ultra-low power radios that are compatible with the Bluetooth Low-Energy (BLE) standard. BLE is considered as the preeminent protocol for short-range communications that support transmission ranges up to 10’s of meters. Number of low power BLE transmitter (TX) and receiver (RX) architectures have been designed, fabricated and tested in different planar CMOS and FinFET technologies. The low power operation is achieved by combining low power techniques in both the network and physical layers, namely: backchannel communication, duty-cycling, open-loop transmission/reception, PLL-less architectures, and mixer-first architectures. Further novel techniques have been proposed to further reduce the power the consumption of the radio design, including: a fast startup time and low startup energy crystal oscillators, an antenna-chip co-design approach for quadrature generation in the RF path, an ultra-low power discrete-time differentiator-based Gaussian Frequency Shift Keying (GFSK) demodulation scheme, an oversampling GFSK modulation/demodulation scheme for open loop transmission/reception and packet synchronization, and a cell-based design approach that allows automation in the design of BLE digital architectures. The implemented BLE TXs transmit fully-compliant BLE advertising packet that can be received by commercial smartphone. In the second part of the thesis, I introduce passive nonlinear resonant circuits to achieve wide-band RF energy harvesting and robust wireless power transfer circuits. Nonlinear resonant circuits modeled by the Duffing nonlinear differential equation exhibit interesting hysteresis characteristics in their frequency and amplitude responses that are exploited in designing self-adaptive wireless charging systems. In the magnetic-resonance wireless power transfer scenario, coupled nonlinear resonators are proposed to maintain the power transfer level and efficiency over a range of coupling factors without active feedback control circuitry. Coupling factor depends on the transmission distance, lateral, and angular misalignments between the charging pad and the device. Therefore, nonlinear resonance extends the efficient charging zones of a wireless charger without the requirement for a precise alignment.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169842/1/omaratty_1.pd

RF-CMOS Switched-Capacitor Power Amplifier for NB-IoT RF transceivers

The increasing market of Narrowband Internet of Things (NB-IoT) applications brings new challenges and constrains in the design of fully integrated transmission architectures, capable of delivering the desired output power with the highest efficiency and linearity, ensuring the longest battery lifetime of the devices. This work is focused on the study and implementation of the most power consuming block within the transmission chain: the Power Amplifier (PA). In this regard, a Switched Capacitor Power Amplifier (SCPA) is designed to operate at a frequency of 0.9 GHz and aiming the maximum output power allowed by the standard of 23 dBm. The final architecture includes a matching network that connects to eight unit PA cells through an LC filter. Each unit PA cell is made of a cascoded class-D PA, two drivers, a level shifter and two selection logic blocks. All the blocks were developed using RF components from a UMC 130nm CMOS process with a 1.2V/2.4V supply voltage. The results show that the architecture is able to produce a maximum output power of 15.61 dBm with a maximum Power Added Efficiency (PAE) of 26.52% and a Total Harmonic Distortion (THD) of 0.68%. In the same conditions, the measured HD2 and HD3 are of -70.23dBc and -43.41dBc, respectively. Additionally, a modulation stage was implemented in VerilogA in order to evaluate the impact of sending different symbols in the SCPA performance. The block, designed for a 16 QAM modulation, is responsible for generating both the number of unit PA cells to be selected and the phase of the clock connected to each PA cell, depending on the amplitude and phase of the constellation points being transmitted.O mercado crescente de aplicações IoT de largura de banda estreita coloca novos desafios e restrições no desenvolvimento de arquiteturas de transmissão totalmente integradas, capazes de produzir a potência desejada com o máximo de eficiência e linearidade possí- veis, de forma a garantir o maior tempo de vida de bateria dos dispositivos. Este trabalho foca-se no estudo e implementação do bloco da cadeia de transmissão que mais consome: o amplificador de potência. Neste sentido, um amplificador de potência de condensadores comutados é desenhado para operar à frequência de 0.9GHz com o objetivo de produzir à sua saída o valor de potência máxima permitida pelo standard de 23dBm. A arquitetura inclui uma malha de adaptação que liga a oito PAs unitários através de um filtro LC. Cada PA unitário consiste num amplificador de potencia class-D cascoded, dois drivers, um level shifter e dois blocos de lógica de seleção. Todos estes blocos foram desenvolvidos usando componentes RF da tecnologia CMOS 130nm da UMC com uma tensão de alimentação de 1.2V/2.4V. Os resultados mostram que a arquitetura é capaz de produzir uma potência à saída de 15.61dBm, com uma PAE de 26.52% e uma distorção harmónica total de 0.68%. Nas mesmas condições, os valores medidos da HD2 e HD3 são de -70.23dBc e -43.41dBc, respetivamente. Adicionalmente, um andar de modulação foi implementado em VerilogA, de forma a avaliar o impacto de enviar diferentes símbolos na performance do amplificador. Este bloco, desenvolvido para uma modulacao 16QAM, é responsável por gerar o número de unidades de PA a serem selecionados e o relógio de fase que liga a cada PA unitário, dependendo da amplitude e fase dos pontos da constelação a serem transmitidos

Analysis and Design of Energy Efficient Frequency Synthesizers for Wireless Integrated Systems

Advances in ultra-low power (ULP) circuit technologies are expanding the IoT applications in our daily life. However, wireless connectivity, small form factor and long lifetime are still the key constraints for many envisioned wearable, implantable and maintenance-free monitoring systems to be practically deployed at a large scale. The frequency synthesizer is one of the most power hungry and complicated blocks that not only constraints RF performance but also offers subtle scalability with power as well. Furthermore, the only indispensable off-chip component, the crystal oscillator, is also associated with the frequency synthesizer as a reference. This thesis addresses the above issues by analyzing how phase noise of the LO affect the frequency modulated wireless system in different aspects and how different noise sources in the PLL affect the performance. Several chip prototypes have been demonstrated including: 1) An ULP FSK transmitter with SAR assisted FLL; 2) A ring oscillator based all-digital BLE transmitter utilizing a quarter RF frequency LO and 4X frequency multiplier; and 3) An XO-less BLE transmitter with an RF reference recovery receiver. The first 2 designs deal with noise sources in the PLL loop for ultimate power and cost reduction, while the third design deals with the reference noise outside the PLL and explores a way to replace the XO in ULP wireless edge nodes. And at last, a comprehensive PN theory is proposed as the design guideline.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/153420/1/chenxing_1.pd