A SiGe 8-Channel Comparator for Application in a Synthetic Aperture Radiometer

We present a high-speed low-power 8-channel comparator tailored for the application of sampling antenna signals in a cross-correlator system for space-borne synthetic aperture radiometer instruments. Features like clock return path, per-channel offset calibration and bias current tuning make the comparator adaptable and gives the possibility to adjust the comparator for low power consumption, while keeping performance within the requirements of the cross-correlator system. The comparator has been implemented and fabricated in a 130-nm SiGe BiCMOS process. Measurements show that the comparator can perform sampling at a rate of 4.5 GS/s with a power consumption of 48 mW/channel or 1 GS/s with a power consumption of 17 mW/channel

1.6 GHz Low-Power Cross-Correlator System Enabling Geostationary Earth Orbit Aperture Synthesis

We present a 64-channel cross-correlator system for space-borne synthetic aperture imaging. Two different types of ASICs were developed to fit into this system: An 8-channel comparator ASIC implemented in a 130 nm SiGe BiCMOS process technology performs A/D conversion, while a single 64-channel digital cross-correlator ASIC implemented in a 65 nm CMOS process performs the signal processing. The digital ASIC handles 2016 cross-correlations at up to 3.6 GS/s and has a power dissipation of only 0.13 mW/correlation/GHz at a supply voltage of 1 V. The comparator ASIC can handle sample rates of at least 4.5 GS/s with a power dissipation of 47 mW/channel or 1 GS/s with a power dissipation of 17 mW/channel. The assembled system consists of a single board measuring a mere 136 x 136 mm(2) and weighing only 135 g. The assembled system demonstrates crosstalk of 0.04% between neighboring channels and stability of 800 s. We provide ASIC and system-board measurement results that demonstrate that aperture synthesis can be a viable approach for Earth observation from a geostationary Earth orbit

Cross-Correlator Implementations Enabling Aperture Synthesis for Geostationary-Based Remote Sensing

An ever-increasing demand for weather prediction and high climate modelling accuracy drives the need for better atmospheric data collection. These demands include better spatial and temporal coverage of mainly humidity and temperature distributions in the atmosphere. A new type of remote sensing satellite technology is emerging, originating in the field of radio astronomy where telescope aperture upscaling could not keep up with the increasing demand for higher resolution. Aperture synthesis imaging takes an array of receivers and emulates apertures extending way beyond what is possible with any single antenna. In the field of Earth remote sensing, the same idea could be used to construct satellites observing in the microwave region at a high resolution with foldable antenna arrays. If placed in a geostationary orbit, these could produce images with high temporal resolution, however, such altitudes make the resolution requirement and, hence, signal processing very demanding. The relentless development in miniaturization of integrated circuits has in recent years made the concept of high resolution aperture synthesis imaging aboard a satellite platform viable.The work presented in this thesis addresses the challenge of performing the vital signal processing required aboard an aperture synthesis imager; namely the cross-correlation. A number of factors make the application challenging; the very restrictive power budgets of satellites, the immense amount of signal processing required for larger arrays, and the environmental aspects of in-space operation. The design, fabrication and evaluation of two cross-correlator application-specific integrated circuits (ASICs), one analog-to-digital converter (ADC) ASIC and one complete cross-correlator back-end is presented. Design concepts such as clocking schemes, data routing and reconfigurable accuracy for the cross-correlators and offset compensation and interfacing of the ADCs are explained. The underlying reasons for design choices as well as ASIC design and testing methodologies are described. The ASICs are put into their proper context as part of an interferometer system, and some different cross-correlator back-end architectures are explored.The result from this work is a very power-efficient, high-performance way of constructing cross-correlators which clearly demonstrates the viability of space-borne microwave imaging interferometer back-ends