186 research outputs found

    Hybrid SPAD/PD Receiver for Reliable Free-Space Optical Communication

    Get PDF

    High-Sensitivity Inter-Satellite Optical Communications using Chip-Scale LED and Single Photon Detector Hardware

    Get PDF
    Small satellites have challenging size weight and power requirements for communications modules, which we address here by using chip-scale light-emitting diode (LED) transmitters and single-photon avalanche diode receivers. Data rates of 100 Mb/s have been demonstrated at a sensitivity of -55.2 dBm, and simulations with supporting experimental work indicate ranges in excess of 1 km are feasible with a directional gain of up to 52 dBi and comparatively modest pointing requirements. A 750 m, 20 Mb/s link using a single micro-LED has been demonstrated experimentally. The low electrical power requirements and compact, semiconductor nature of these devices offer high data rate, high sensitivity communications for small satellite platforms

    SPAD-Based Optical Wireless Communication with Signal Pre-Distortion and Noise Normalization

    Get PDF
    In recent years, there has been a growing interest in exploring the application of single-photon avalanche diode (SPAD) in optical wireless communication (OWC). As a photon counting detector, SPAD can provide much higher sensitivity compared to the other commonly used photodetectors. However, SPAD-based receivers suffer from significant dead-time-induced non-linear distortion and signal dependent noise. In this work, we propose a novel SPAD-based OWC system in which the non-linear distortion caused by dead time can be successfully eliminated by the pre-distortion of the signal at the transmitter. In addition, another system with joint pre-distortion and noise normalization functionality is proposed. Thanks to the additional noise normalization process, for the transformed signal at the receiver, the originally signal dependent noise becomes signal independent so that the conventional signal detection techniques designed for AWGN channels can be employed to decode the signal. Our numerical results demonstrate the superiority of the proposed SPAD-based systems compared to the existing systems in terms of BER performance and achievable data rate

    Poissonian communications : free space optical data transfer at the few-photon level

    Get PDF
    Communicating information at the few photon level typically requires some complexity in the transmitter or receiver in order to operate in the presence of noise. This in turn incurs expense in the necessary spatial volume and power consumption of the system. In this work we present a self-synchronised free-space optical communications system based on simple, compact and low power consumption semiconductor devices. A temporal encoding method, implemented using a gallium nitride micro-LED source and a silicon single photon avalanche photo-detector (SPAD) demonstrates data transmission at rates up to 100 kb/s for 8.25 pW received power, corresponding to 27 photons per bit. Furthermore, the signals can be decoded in the presence of both constant and modulated background noise at levels significantly exceeding the signal power. The systems low power consumption and modest electronics requirements are demonstrated employing it as a communications channel between two nano-satellite simulator systems

    Receiver design for SPAD-based VLC systems under Poisson-Gaussian mixed noise model

    No full text
    Single-photon avalanche diode (SPAD) is a promising photosensor because of its high sensitivity to optical signals in weak illuminance environment. Recently, it has drawn much attention from researchers in visible light communications (VLC). However, existing literature only deals with the simplified channel model, which only considers the effects of Poisson noise introduced by SPAD, but neglects other noise sources. Specifically, when an analog SPAD detector is applied, there exists Gaussian thermal noise generated by the transimpedance amplifier (TIA) and the digital-to-analog converter (D/A). Therefore, in this paper, we propose an SPAD-based VLC system with pulse-amplitude-modulation (PAM) under Poisson-Gaussian mixed noise model, where Gaussian-distributed thermal noise at the receiver is also investigated. The closed-form conditional likelihood of received signals is derived using the Laplace transform and the saddle-point approximation method, and the corresponding quasi-maximum-likelihood (quasi-ML) detector is proposed. Furthermore, the Poisson-Gaussian-distributed signals are converted to Gaussian variables with the aid of the generalized Anscombe transform (GAT), leading to an equivalent additive white Gaussian noise (AWGN) channel, and a hard-decision-based detector is invoked. Simulation results demonstrate that, the proposed GAT-based detector can reduce the computational complexity with marginal performance loss compared with the proposed quasi-ML detector, and both detectors are capable of accurately demodulating the SPAD-based PAM signals

    Statistical Modeling of Single-Photon Avalanche Diode Receivers for Optical Wireless Communications

    Get PDF
    In this paper, a comprehensive analytical approach is presented for modeling the counting statistics of active quenching and passive quenching single-photon avalanche diode (SPAD) detectors. It is shown that, unlike ideal photon counting receiver for which the detection process is described by a Poisson arrival process, photon counts in practical SPAD receivers do not follow a Poisson distribution and are highly affected by the dead time caused by the quenching circuit. Using the concepts of renewal theory, the exact expressions for the probability distribution and moments (mean and variance) of photocounts in the presence of dead time are derived for both active quenching and passive quenching SPADs. The derived probability distributions are validated through Monte Carlo simulations and it is demonstrated that the moments match with the existing empirical models for the moments of SPAD photocounts. Furthermore, an optical communication system with on-off keying and binary pulse position modulation is considered and the bit error performance of the system for different dead time values and background count levels is evaluated

    The Bit Error Performance and Information Transfer Rate of SPAD Array Optical Receivers

    Get PDF
    In this paper the photon counting characteristics, the information rate and the bit error performance of single-photon avalanche diode (SPAD) arrays are investigated. It is shown that for sufficiently large arrays, the photocount distribution is well approximated by a Gaussian distribution with dead-time-dependent mean and variance. Because of dead time, the SPAD array channel is subject to counting losses, part of which are due to inter-slot interference (ISI) distortions. Consequently, this channel has memory. The information rate of this channel is assessed. Two auxiliary discrete memoryless channels (DMCs) are proposed which provide upper and lower bounds on the SPAD array information rate. It is shown that in sufficiently large arrays, ISI is negligible and the bounds are tight. Under such conditions, the SPAD array channel is precisely modelled as a memoryless channel. A discrete-time Gaussian channel with input-dependent mean and variance is adopted and the properties of the capacity-achieving input distributions are studied. Using a numerical algorithm, the information rate and the capacity-achieving input distributions, subject to peak and average power constraints are obtained. Furthermore, the bit error performance of a SPAD-based system with on-off keying (OOK) is evaluated for various array sizes, dead times and background count levels
    • …
    corecore