Chip-to-chip optical wireless link feasibility using optical phased arrays on silicon-on-insulator

One- and two-dimensional integrated optical phased arrays (OPAs) on silicon-on-insulator have been fabricated and measured having directivities of more than 40dBi and steering ranges up to 10 degrees . These OPAs would allow data rates of 100Mbps at distances up to 0.5m

On-dimensional off-chip beam steering and shaping using optical phased arrays on silicon-on-insulator

Optical beam steering can find applications in several domains such as laser scanning, LiDAR (Light Detection And Ranging), wireless data transfer and optical switches and interconnects. As present beam steering approaches use mechanical motion such as moving mirrors or MEMS (Micro Electro Mechanical Systems) or molecular movement using liquid crystals, they are usually limited in speed and/or performance. Therefore we have studied the possibilities of the integrated silicon photonics platform in beam steering applications. In this paper, we have investigated a 16 element one-dimensional optical phased array on silicon-on-insulator with a field-of-view of 23. Using thermo-optic phase tuners, we have shown beam steering over the complete field-of-view. By programming the phase tuners as a lens, we have also shown the focusing capabilities of this one-dimensional optical phased array. The field-of-view can easily be increased by decreasing the width of the waveguides. This clearly shows the potential of silicon photonics in beam steering and scanning applications

Two-dimensional dispersive beam steerer fabricated on silicon-on-insulator

A two-dimensional beam steerer on silicon-on-insulator is presented. Steering ranges of 5.5 degrees in one direction and 50 degrees in the other direction have been shown for a wavelength shift of 40nm. The largest measured sensitivity was 10.7 degrees per nanometer wavelength shift

Reflective liquid crystal hybrid beam-steerer

We report on efficient optical beam-steering using a hot-embossed reflective blazed grating in combination with liquid crystal. A numerical simulation of the electrical switching characteristics of the liquid crystal is performed and the results are used in an FDTD optical simulator to analyze the beam deflection. The corresponding experiment on the realized device is performed and is found to be in good agreement. Beam deflection angles of 4.4° upon perpendicular incidence are found with low applied voltages of 3.4V. By tilting the device with respect to the incoming optical beam it can be electronically switched such that the beam undergoes either total internal reflection or reflection with a tunable angle

2D tunable graded index prism beam steering device based on nematic liquid crystals

Liquid crystal devices are being used in many non-display applications in order to construct small devices controlled by low voltage electronics without mechanical components. In this work, we present a novel liquid crystal device for laser beam steering. In this device the orientation of the liquid crystal molecules can be controlled. A change in the liquid crystal orientation results in a change of the refractive index. When a laser beam passes through the device, the beam will be deviated (Fig.1) and the device works a prism. The main difference between this device and a prism is that in the device the orientation profile of the liquid crystal molecules can be modified so that the laser beam can be deviated a required angle: the device is tuneable

On the performance of optical phased array technology for beam steering : effect of pixel limitations

Optical phased arrays are of strong interest for beam steering in telecom and LIDAR applications. A phased array ideally requires that the field produced by each element in the array (a pixel) is fully controllable in phase and amplitude (ideally constant). This is needed to realize a phase gradient along a direction in the array, and thus beam steering in that direction. In practice, grating lobes appear if the pixel size is not sub-wavelength, which is an issue for many optical technologies. Furthermore, the phase performance of an optical pixel may not span the required 2π phase range or may not produce a constant amplitude over its phase range. These limitations result in imperfections in the phase gradient, which in turn introduce undesirable secondary lobes. We discuss the effects of non-ideal pixels on beam formation, in a general and technology-agnostic manner. By examining the strength of secondary lobes with respect to the main lobe, we quantify beam steering quality and make recommendations on the pixel performance required for beam steering within prescribed specifications. By applying appropriate compensation strategies, we show that it is possible to realize high-quality beam steering even when the pixel performance is non-ideal, with intensity of the secondary lobes two orders of magnitude smaller than the main lobe. © 2020 OSA - The Optical Society. All rights reserved