Advanced Coordinated Beamforming for the Downlink of Future LTE Cellular Networks

Modern cellular networks in traditional frequency bands are notoriously interference-limited especially in urban areas, where base stations are deployed in close proximity to one another. The latest releases of Long Term Evolution (LTE) incorporate features for coordinating downlink transmissions as an efficient means of managing interference. Recent field trial results and theoretical studies of the performance of joint transmission (JT) coordinated multi-point (CoMP) schemes revealed, however, that their gains are not as high as initially expected, despite the large coordination overhead. These schemes are known to be very sensitive to defects in synchronization or information exchange between coordinating bases stations as well as uncoordinated interference. In this article, we review recent advanced coordinated beamforming (CB) schemes as alternatives, requiring less overhead than JT CoMP while achieving good performance in realistic conditions. By stipulating that, in certain LTE scenarios of increasing interest, uncoordinated interference constitutes a major factor in the performance of CoMP techniques at large, we hereby assess the resilience of the state-of-the-art CB to uncoordinated interference. We also describe how these techniques can leverage the latest specifications of current cellular networks, and how they may perform when we consider standardized feedback and coordination. This allows us to identify some key roadblocks and research directions to address as LTE evolves towards the future of mobile communications.Comment: 16 pages, 6 figures, accepted to IEEE Communications Magazin

A review of codebooks for CSI feedback in 5G new radio and beyond

Codebooks have been indispensable for wireless communication standard since the first release of the Long-Term Evolution in 2009. They offer an efficient way to acquire the channel state information (CSI) for multiple antenna systems. Nowadays, a codebook is not limited to a set of pre-defined precoders, it refers to a CSI feedback framework, which is more and more sophisticated. In this paper, we review the codebooks in 5G New Radio (NR) standards. The codebook timeline and the evolution trend are shown. Each codebook is elaborated with its motivation, the corresponding feedback mechanism, and the format of the precoding matrix indicator. Some insights are given to help grasp the underlying reasons and intuitions of these codebooks. Finally, we point out some unresolved challenges of the codebooks for future evolution of the standards. In general, this paper provides a comprehensive review of the codebooks in 5G NR and aims to help researchers understand the CSI feedback schemes from a standard and industrial perspective.Comment: 11pages, 7 figures, 1 table, magzine revie

3GPP LTE Release 9 and 10 requirement analysis to physical layer UE testing

The purpose of this thesis was to analyze the testing requirements to physical layer features which are used in LTE Release 9 and 10 timeframe. The aim of the analysis was to define test case requirements for new features from the physical layer point of view. This analysis can then be utilized to implement and design test cases using commercial eNB simulators. The analysis was carried out by studying the 3GPP specifications and by investigating the integration and system level testing requirements. Different feature specific parameters were evaluated and different testing aspects were studied in order to verify the functionalities and performance of the UE. Also, different conformance test case scenarios and field testing aspects were investigated in order to improve the test case planning in the integration and system testing phase. The analysis showed that in Rel-9 there are two main features which have a great impact on the Rel-9 physical layer testing. These two features are the dual-layer beamforming and UE positioning which is done with OTDOA and E-CID methods. It was analyzed that the requirements for the downlink dual-layer beamforming focus on TDD side and the test plan must contain especially throughput performance testing in integration and system phase testing. OTDOA and E-CID methods, on the other hand, need test plans which are concentrating on the positioning accuracy. In Rel-10, the analysis showed that there are plenty of new features on physical layer to ensure the transition from LTE to LTE-Advanced. The main requirements were assigned for the CA feature which has testing activities especially on the UE feedback operations. Also, different kinds of CA deployment scenarios were analyzed to evaluate more closely the initial CA testing scenarios in integration and system testing. Analysis continued with downlink multi-layer beamforming where the requirements were seen to concentrate on new CSI-RS aspects and to throughput performance testing. Uplink MIMO aspects were analyzed at the end and the studies showed that this feature may have a minor role in Rel-10 timeframe and therefore it does not have any important testing requirements which should be taken into account in test plans

Uplink MIMO schemes in local area time division duplex system

One of 3rd Generation Partnership Projects's release 9 research areas is deployment and improvement of Long Term Evolutions's Evolved Universal Terrestrial Radio Access interface in local area cells, using time division duplex and 100MHz available bandwidth. For uplink part of this system, we revise and study MIMO algorithms considered in release 8's downlink (Cyclic Delay Diversity and Space-Frequency Block Codes open-loop schemes, Singular Value Decomposition and codebook-based closed-loop schemes), look for new alternatives, and simulate impacts of given scenario - reciprocity, correlated MIMO channels, slow fading etc. As a result, we draw conclusions about advantages of having multiple transmit antennas in User Equipment in contrast with higher price and power consumption

Evaluating the effectiveness of Cooperative/Coordinated Multipoint (CoMP) LTE feature in uplink and downlink transmissions

Shannon demonstrated that the channel capacity depends of the ratio of the received signal power to interference plus noise power (SINR). Inter-cell interference caused by neighbouring base stations (BSs) has been identified as one of the most severe problem towards the deployment of LTE technology as it can significantly deteriorate the performance of cellside User Equipment (UE). However, because of regulatory and radiation restrictions as well as operational costs, signal power may only be increased only up to a certain limit to reduce the interference. The other common radio propagation impairment is multipath. Multipath refers to a scenario where multiple copies of a signal propagate to a receiver using different paths. The paths can be created due to signal reflection, scattering and diffraction. As will be discussed later the effects of multipath contribute little to intercell interference because multipath characteristics such as delay spread are compensated for using cyclic prefixes. In this work, we will limit our scope to interference as it has been identified as the main cause of performance degradation for cell edge users due to the full frequency reuse technique used in LTE. To mitigate interference 3GPP devised options of increasing the capacity in LTEAdvanced Release 12 which include the use of spectral aggregation, employing Multiple Input and Multiple Output (MIMO) Antenna techniques, deploying more base stations and micro and femto cells, increasing the degree of sectorisation and Coordinated Multipoint (CoMP). We are primarily interested in evaluating performance improvements introduced when uplink (UL) and downlink (DL) coordinated/cooperative multipoint (CoMP) is enabled in LTE Advanced Release 12 as a way of reducing interference among sites. The CoMP option of reducing interference does not require deployment of new equipment compared to the other options mentioned above hence network deployment costs are minimal. CoMP in theory is known to reduce interference especially for cell edge users and therefore improves network fairness. With CoMP, multiple points coordinate with each other such that transmission of signals to and from other points do not incur serious interference or the interference can even be exploited as a meaningful signal. In September 2011 work on specifications for CoMP support was started in 3GPP LTEAdvanced as one of the core features in LTE-Advanced Release 11 to improve cell edge user throughput as well as the average network throughput. We set to do field measurements in the evaluation of the effectiveness of CoMP in LTE. 3GPP LTE Release 12 was used and cell edge users' performance was the focus. The network operates in 2330 - 2350 MHz band (Channel 40). From the field measurements, it was demonstrated that the CoMP (Scenario 2) feature indeed effective in improving service quality/user experience/fairness for cell edge users. CoMP inherently improves network capacity. A seven (7) percent throughput was noticed