1,264 research outputs found
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
This paper presents details and applications of a novel channel simulation
software named NYUSIM, which can be used to generate realistic temporal and
spatial channel responses to support realistic physical- and link-layer
simulations and design for fifth-generation (5G) cellular communications.
NYUSIM is built upon the statistical spatial channel model for broadband
millimeter-wave (mmWave) wireless communication systems developed by
researchers at New York University (NYU). The simulator is applicable for a
wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF)
bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and
7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban
macrocell, and rural macrocell), and also incorporates multiple-input
multiple-output (MIMO) antenna arrays at the transmitter and receiver. This
paper also provides examples to demonstrate how to use NYUSIM for analyzing
MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an
alternative and more realistic channel model compared to the 3rd Generation
Partnership Project (3GPP) and other channel models for mmWave bands.Comment: 7 pages, 8 figures, in 2017 IEEE International Conference on
Communications (ICC), Paris, May 201
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Millimetre-wave antennas and systems for the future 5G
Editorial of the special issue on Millimetre-Wave Antennas and Systems for the Future 5
Millimeter Wave MIMO Channel Estimation Based on Adaptive Compressed Sensing
Multiple-input multiple-output (MIMO) systems are well suited for
millimeter-wave (mmWave) wireless communications where large antenna arrays can
be integrated in small form factors due to tiny wavelengths, thereby providing
high array gains while supporting spatial multiplexing, beamforming, or antenna
diversity. It has been shown that mmWave channels exhibit sparsity due to the
limited number of dominant propagation paths, thus compressed sensing
techniques can be leveraged to conduct channel estimation at mmWave
frequencies. This paper presents a novel approach of constructing beamforming
dictionary matrices for sparse channel estimation using the continuous basis
pursuit (CBP) concept, and proposes two novel low-complexity algorithms to
exploit channel sparsity for adaptively estimating multipath channel parameters
in mmWave channels. We verify the performance of the proposed CBP-based
beamforming dictionary and the two algorithms using a simulator built upon a
three-dimensional mmWave statistical spatial channel model, NYUSIM, that is
based on real-world propagation measurements. Simulation results show that the
CBP-based dictionary offers substantially higher estimation accuracy and
greater spectral efficiency than the grid-based counterpart introduced by
previous researchers, and the algorithms proposed here render better
performance but require less computational effort compared with existing
algorithms.Comment: 7 pages, 5 figures, in 2017 IEEE International Conference on
Communications Workshop (ICCW), Paris, May 201
Fast Cell Discovery in mm-wave 5G Networks with Context Information
The exploitation of mm-wave bands is one of the key-enabler for 5G mobile
radio networks. However, the introduction of mm-wave technologies in cellular
networks is not straightforward due to harsh propagation conditions that limit
the mm-wave access availability. Mm-wave technologies require high-gain antenna
systems to compensate for high path loss and limited power. As a consequence,
directional transmissions must be used for cell discovery and synchronization
processes: this can lead to a non-negligible access delay caused by the
exploration of the cell area with multiple transmissions along different
directions.
The integration of mm-wave technologies and conventional wireless access
networks with the objective of speeding up the cell search process requires new
5G network architectural solutions. Such architectures introduce a functional
split between C-plane and U-plane, thereby guaranteeing the availability of a
reliable signaling channel through conventional wireless technologies that
provides the opportunity to collect useful context information from the network
edge.
In this article, we leverage the context information related to user
positions to improve the directional cell discovery process. We investigate
fundamental trade-offs of this process and the effects of the context
information accuracy on the overall system performance. We also cope with
obstacle obstructions in the cell area and propose an approach based on a
geo-located context database where information gathered over time is stored to
guide future searches. Analytic models and numerical results are provided to
validate proposed strategies.Comment: 14 pages, submitted to IEEE Transaction on Mobile Computin
milliProxy: a TCP Proxy Architecture for 5G mmWave Cellular Systems
TCP is the most widely used transport protocol in the internet. However, it
offers suboptimal performance when operating over high bandwidth mmWave links.
The main issues introduced by communications at such high frequencies are (i)
the sensitivity to blockage and (ii) the high bandwidth fluctuations due to
Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In
particular, TCP has an abstract view of the end-to-end connection, which does
not properly capture the dynamics of the wireless mmWave link. The consequence
is a suboptimal utilization of the available resources. In this paper we
propose a TCP proxy architecture that improves the performance of TCP flows
without any modification at the remote sender side. The proxy is installed in
the Radio Access Network, and exploits information available at the gNB in
order to maximize throughput and minimize latency.Comment: 7 pages, 6 figures, 2 tables, presented at the 2017 51st Asilomar
Conference on Signals, Systems and Computers, Pacific Grove, CA, 201
- …