Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review

Advances in reflectarrays and array lenses with electronic beam-forming capabilities are enabling a host of new possibilities for these high-performance, low-cost antenna architectures. This paper reviews enabling technologies and topologies of reconfigurable reflectarray and array lens designs, and surveys a range of experimental implementations and achievements that have been made in this area in recent years. The paper describes the fundamental design approaches employed in realizing reconfigurable designs, and explores advanced capabilities of these nascent architectures, such as multi-band operation, polarization manipulation, frequency agility, and amplification. Finally, the paper concludes by discussing future challenges and possibilities for these antennas.Comment: 16 pages, 12 figure

Low-Profile Wideband Antenna Arrays for Mobile Satellite and 5G Communication

Three innovative low-profile antenna arrays are designed and tested for vehicular satellite and 5G communication. All of the systems presented target key challenges of GEO, LEO and 5G communication. Each design provides a high level of performance for the given application in a far more compact and lower cost design than existing systems.Firstly, a wideband curl antenna array is developed to enable L-band GEO satellite communication for emergency vehicles. This novel 1×3 rotated array utilises a hybrid switch beam and phase shifting technique to enable full beamforming down to 70° in all directions with 40% lower cost than standard phased array systems. Uniquely, this provides excellent azimuth beam steering at low angles from a linear array. This system also utilises a high impedance surface to reduce the height of the antenna elements by 50% compared to existing curl antenna designs.Secondly, a shared aperture antenna array is developed to enable Ka-band LEO satellite communication for vehicular integration. This system utilise a new combination of circular polarised triangular antennas in an interlaced planar triangular lattice such that the topology provides optimal tessellation. As a result, the system provides high performance beam steering and reconfigurable circular polarisation in a highly compact design. This array has been developed such that it is suitable for common PCB manufacturing methods. Unlike existing shared aperture arrays for LEO terminals, this topology enables reconfigurable circular polarisation in a single, planar PCB structure.Finally, a low-cost wideband compressed spiral antenna array is designed and fabricated for global 5G ground-to-air communication for aircraft. An innovative spiral antenna optimisation is presented where the spiral is highly compressed such that it can provide an axial beam over a wide bandwidth while maintaining a lower profile than existing wideband solutions

Ultra-Wideband Phased Arrays for Small Mobile Platforms

This dissertation presents the development of a new class of Ultra-Wideband (UWB) apertures for aerial applications by introducing designs with over 50:1 bandwidth and novel differential feeding approaches. Designs that enable vertical integration for flip-chip millimeter-wave (UWB) transceivers are presented for small aerial platforms. Specifically, a new scalable tightly coupled array is introduced with differential feeding for chip integration. This new class of beam-forming arrays are fabricated and experimentally tested for validation with operation from as low as 130 MHz up to 18 GHz. A major achievement is the study of millimeter wave beamforming designs that operate from 22-80 GHz, fabricated using low-cost printed circuit board (PCB) methods. This low-cost fabrication approach and associated testing of the beamforming arrays are unique and game-changing

Antenna Designs Aiming at the Next Generation of Wireless Communication

Millimeter-wave (mm-wave) frequencies have drawn large attention, specically for the fifth generation (5G) of wireless communication, due to their capability to provide high data-rates. However, design and characterization of the antenna system in wireless communication will face new challenges when we move up to higher frequency bands. The small size of the components at higher frequencies will make the integration of the antennas in the system almost inevitable. Therefore, the individual characterization of the antenna can become more challenging compared to the previous generations.This emphasizes the importance of having a reliable, simple and yet meaningful Over-the-Air (OTA) characterization method for the antenna systems. To avoid the complexity of using a variety of propagation environments in the OTA performance characterization, two extreme or edge scenarios for the propagation channels are presented, i.e., the Rich Isotropic Multipath (RIMP) and Random Line-of-Sight (Random-LoS). MIMO efficiency has been defined as a Figure of Merit (FoM), based on the Cumulative Distribution Function (CDF) of the received signal, due to the statistical behavior of the signal in both RIMP and Random-LoS. Considering this approach, we have improved the design of a wideband antenna for wireless application based on MIMO efficiency as the FoM of the OTA characterization in a Random-LoS propagation environment. We have shown that the power imbalance and the polarization orthogonality plays major roles determining the 2-bitstream MIMO performance of the antenna in Random-LoS. In addition, a wideband dual-polarized linear array is designed for an OTA Random-LoS measurement set-up for automotive wireless systems. The next generation of wireless communications is extended throughout multiple narrow frequency bands, varying within 20-70 GHz. Providing an individual antenna system for each of these bands may not be feasible in terms of cost, complexity and available physical space. Therefore, Ultra-Wideband (UWB) antenna arrays, coveringmultiple mm-wave frequency bands represent a versatile candidate for these antenna systems. In addition to having wideband characteristics, these antennas should offer an easy integration capability with the active modules. We present a new design of UWB planar arrays for mm-wave applications. The novelty is to propose planar antenna layouts to provide large bandwidth at mm-wave frequencies, using simplified standard PCB manufacturing techniques. The proposed antennas are based on Tightly Coupled Dipole Arrays (TCDAs) concept with integrated feeding network

A Foldable Tightly Coupled Crossed Rings Antenna Array of Ultrawide Bandwidth and Dual Polarization

Low-profile foldable array antennas are becoming increasingly more important for a wide range of applications such as satellite communications and wearable electronic devices. The conventional arrays formed by patch-like antennas have been extensively studied on surfaces with a curvature but they have exhibited limited bandwidth and polarization performance. This study investigates a coupling enhanced crossed rings antenna array with two typical configurations for dual polarization, which inherently produces ultrawide bandwidth, dipole-like polarization characteristics and a fully curved array (FCA) eventually. The fractional bandwidth of the array is over 100% on a planar surface and expanded to approximately 140% on the curved surface. For the bent array of slant polarization, the beamwidth increases by over 20° compared to the planar array and cross polarization discrimination (XPD) maintains above 15 dB. The effects of curvature on the impedance matching and polarized radiation patterns for such arrays are investigated by measuring the performance of the fabricated prototype arrays. The results revealed that the tightly coupled crossed rings antenna array on a curved surface has a potential to form multiple beams on a limited aperture size through smaller subarrays which can yield ultrawide bandwidth due to concentrated mutual coupling mechanism. This characteristic is promising in applications where traditional flat panel arrays are difficult to implement such as in mobile stations, moving platforms and for satellite communication on-the-move

Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas

Realization of an Ultra-thin Metasurface to Facilitate Wide Bandwidth, Wide Angle Beam Scanning

© 2018 The Author(s). A wide bandwidth, ultra-thin, metasurface is reported that facilitates wide angle beam scanning. Each unit cell of the metasurface contains a multi-resonant, strongly-coupled unequal arm Jerusalem cross element. This element consists of two bent-arm, orthogonal, capacitively loaded strips. The wide bandwidth of the metasurface is achieved by taking advantage of the strong coupling within and between its multi-resonant elements. A prototype of the proposed metasurface has been fabricated and measured. The design concept has been validated by the measured results. The proposed metasurface is able to alleviate the well-known problem of impedance mismatch caused by mutual coupling when the main beam of an array is scanned. In order to validate the wideband and wide scanning ability of the proposed metasurface, it is integrated with a wideband antenna array as a wide angle impedance matching element. The metasurface-array combination facilitates wide angle scanning over a 6:1 impedance bandwidth without the need for bulky dielectrics or multi-layered structures